Compare Stocks

Camtek Ltd., together with its subsidiaries, develops, manufactures, and sells inspection and metrology equipment for semiconductor industry. The company provides Eagle-i, a system that delivers 2D inspection and metrology capabilities; Eagle-AP, which addresses the advanced packaging market using software and hardware technologies that deliver superior 2D and 3D inspection and metrology capabilities on the same platform; and Golden Eagle, a panel inspection and metrology system to address the challenges fanout wafer level packaging applications. It also develops automatic defect classification, which provides automatic defect classification of color images utilizing deep learning techniques to reduce and eliminate manual verification. In addition, the company offers MicroProf AP, a wafer metrology tool for applications at 3D packaging process steps; MicroProf DI, an optical inspection tool that enables inspection of structured and unstructured wafers for manufacturing process; MicroProf FE, a 2D/3D wafer metrology tool that serve front end HVM fab; MicroProf FS, an wafer metrology tool configurable for wafer foundry; MicroProf PT for hybrid metrology applications to common panel sizes; MicroProf MHU metrology tool, a material handling unit for semiconductor, MEMS, sapphire, and LED industries; MicroProf TL, an optical surface measurement tool for fully automatic 3D surface measurements; MicroProf 100, a universal surface metrology tool for determination of topography and film and sample thickness; MicroProf 200, a measuring device for contactless and non-destructive characterization of surfaces and films; and MicroProf 300, a SurfaceSens technology for quality assurance, development, and manufacturing. It serves semiconductor manufacturers, outsourced semiconductor assembly and test, integrated device manufacturers, and wafer level packaging subcontractors. Camtek Ltd. was incorporated in 1987 and is headquartered in Migdal Haemek, Israel.

CyberOptics Corporation designs, develops, manufactures, and markets high precision sensing technology solutions and system products for inspection and metrology worldwide. It offers products based on multi-reflection suppression (MRS) technology, including multi-function systems for inspection and metrology; MX3000 memory module inspection system; 3D NanoResolution MRS sensor and WX3000 inspection and metrology system for semiconductor wafer and advanced packaging inspection and metrology; high precision 3D and 2D sensors; 3D MRS sensors; SMT electronic assembly alignment sensors; and inspection and metrology systems. The company also provides automated optical inspection (AOI) products; SQ3000 multi-function systems; QX Series 2D AOI products; MX products for inspection of memory modules; SPI Products; and semiconductor wafer and advanced packaging products. In addition, it offers general industrial metrology products and services, such as CyberGage360, a near-line or off-line metrology tool; and 3D scanning and metrology equipment, as well as semiconductor, automatic leveling, automatic gapping, automatic teaching, automatic vibration, WaferSense airborne particle, in-line particle, WaferSense auto multi, WaferSense 300mm auto resistance, and WaferSense auto vibration and leveling sensors. The company sells its products to SMT electronic assembly circuit board manufacturers, end-user customers manufacturing their own circuit boards, semiconductor manufacturers, and outsourced semiconductor assembly and test companies through independent sales representatives and distributors. CyberOptics Corporation was founded in 1984 and is headquartered in Minneapolis, Minnesota.

II-VI Incorporated develops, manufactures, and markets engineered materials, optoelectronic components, and devices worldwide. It operates through two segments, Compound Semiconductors and Photonic Solutions. The Compound Semiconductors segment provides optical and electro-optical components and materials used in high-power CO2 lasers, fiber-lasers, and direct diode lasers for materials processing applications; infrared optical components and high-precision optical assemblies for aerospace and defense, medical, and commercial laser imaging applications; semiconductor lasers and detectors for optical interconnects and sensing applications; engineered materials for thermoelectric, ceramics, and silicon carbide various applications; and compound semiconductor epitaxial wafers for applications in optical and wireless communication. The Photonic Solutions segment manufactures transceivers for data centers and telecom optical networks; pump lasers, optical amplifiers, wavelength selective switches, and advanced components for telecom networks; and crystal materials, optics, lasers, and optoelectronic modules in a range of applications, including optical communications, life sciences, and consumer electronics markets. The company serves original equipment manufacturers, laser end users, system integrators of high-power lasers, U.S. government prime contractors, and various U.S. government agencies, as well as manufacturers of equipment and devices for industrial, optical communications, consumer electronics, and security and monitoring applications. II-VI Incorporated was incorporated in 1971 and is headquartered in Saxonburg, Pennsylvania.

Nova Ltd. designs, develops, produces, and sells process control systems used in the manufacture of semiconductors in Israel, Taiwan, the United States, China, Korea, and internationally. Its product portfolio includes a set of metrology platforms for dimensional, films, and materials and chemical metrology measurements for process control for various semiconductor manufacturing process steps, including lithography, etch, chemical mechanical planarization, deposition, electrochemical plating, and advanced packaging. The company serves various sectors of the integrated circuit manufacturing industry, including logic, foundries, and memory manufacturers, as well as process equipment manufacturers. Nova Ltd. was formerly known as Nova Measuring Instruments Ltd. and changed its name to Nova Ltd. in July 2021. Nova Ltd. was incorporated in 1993 and is headquartered in Rehovot, Israel.

Topcon Corporation, together with its subsidiaries, develops, manufactures, and sells positioning, eye care, and smart infrastructure products in Japan and internationally. The company provides total station products, including automatic tracking, motor drive, manual, industrial measurement, and imaging stations, as well as layout navigator, millimeter GPS, 3D mobile measurement system and laser scanner, data collector, theodolite, electronic level, and rotating and pipe laser products. It also offers surveying receivers, GNSS reference station systems, civil engineering and precision agriculture displays and machine control systems, agriculture weighing systems, asset management systems. In addition, the company provides 3D retinal imaging device, retinal and non-mydriatic retinal camera, non-contact type tonometer, slit lamp, surgical and specular microscope, optical axial length measuring device, ophthalmic examination data filing system, IMAGEnet, ophthalmic electronic chart system, IMAGEnet e chart, wave front analyzer, autorefractometer, visual acuity tester and chart, refraction test system, lensmeter, screenoscope, digital PD meter, and optometry lens set. The company was formerly known as Tokyo Optical Co., Ltd. and changed its name to Topcon Corporation in 1989. Topcon Corporation was incorporated in 1932 and is headquartered in Tokyo, Japan.