Compare Stocks

Colfax Corp. operates as a diversified technology company. The firm provides orthopedic care and fabrication technology products and services to customers. It operates through the following segments: Medical Technology and Fabrication Technology. The Medical Technology segment develops, manufactures and distributes medical devices used for rehabilitation, pain management and physical therapy. The Fabrication Technology develops, manufactures and supplies consumable products and equipment. The company was founded by Mitchell P. Rales and Steven M. Rales in 1995 and is headquartered in Wilmington, DE.

Flowserve Corporation designs, manufactures, distributes, and services industrial flow management equipment in the United States, Canada, Mexico, Europe, the Middle East, Africa, and the Asia Pacific. It operates through Flowserve Pump Division (FPD) and Flow Control Division (FCD) segments. The FPD segment offers custom and pre-configured pumps and pump systems, mechanical seals, auxiliary systems, replacement parts, upgrades, and related aftermarket services; and equipment services, including installation and commissioning services, seal systems spare parts, repairs, advanced diagnostics, re-rate and upgrade solutions, retrofit programs, and machining and asset management solutions, as well as manufactures a gas-lubricated mechanical seal for use in high-speed compressors for gas pipelines and in the oil and gas production and process markets. The FCD segment provides engineered and industrial valve and automation systems, including isolation and control valves, actuation, controls, and related equipment; and equipment maintenance services for flow control systems, including advanced diagnostics, repair, installation, commissioning, retrofit programs, and field machining capabilities. This segment's products are used to control, direct, and manage the flow of liquids, gases, and multi-phase fluids. It primarily serves oil and gas, chemical and pharmaceuticals, power generation, and water management markets, as well as general industries, including mining and ore processing, pulp and paper, food and beverage, and other smaller applications. The company distributes its products through direct sales, distributors, and sales representatives. Flowserve Corporation was founded in 1790 and is headquartered in Irving, Texas.

Graco Inc. designs, manufactures, and markets systems and equipment used to move, measure, control, dispense, and spray fluid and powder materials worldwide. The Contractor segment offers sprayers to apply paint to walls and other structures; two-component proportioning systems that are used to spray polyurethane foam and polyurea coatings; and viscous coatings to roofs, as well as markings on roads, parking lots, athletic fields, and floors. The Industrial segment provides liquid finishing equipment, paint circulating and supply pumps, paint circulating advanced control systems, plural component coating proportioners, and accessories and spare parts; equipment that pumps, meters, mixes and dispenses sealant, adhesive, and composite materials; and gel-coat equipment, chop and wet-out systems, resin transfer molding systems and applicators, and precision dispensing solutions. It also offers powder finishing products to coat powder finishing on metals under the Gema and SAT brands. The Process segment provides pumps to move and dispense chemicals, water, wastewater, petroleum, food, lubricants, and other fluids; pressure valves used in the oil and natural gas industry, other industrial processes, and research facilities; and chemical injection pumping solutions for injection of chemicals into producing oil wells and pipelines. It also supplies pumps, hose reels, meters, valves, and accessories for fast oil change facilities, service garages, fleet service centers, automobile dealerships, auto parts stores, truck builders, and heavy equipment service centers; and systems, components, and accessories for the automatic lubrication of bearings, gears, and generators in industrial and commercial equipment, compressors, turbines, and on- and off-road vehicles. It sells its products through distributors, original equipment manufacturers, and home center channels, as well as to end-users. The company was incorporated in 1926 and is headquartered in Minneapolis, Minnesota.

IDEX Corporation, together with its subsidiaries, provides applied solutions worldwide. The company operates through three segments: Fluid & Metering Technologies (FMT), Health & Science Technologies (HST), and Fire & Safety/Diversified Products (FSDP). The FMT segment designs, produces, and distributes positive displacement pumps, valves, small volume provers, flow meters, injectors, and other fluid-handling pump modules and systems, as well as flow monitoring and other services for the food, chemical, general industrial, water and wastewater, agricultural, and energy industries. The HST segment designs, produces, and distributes precision fluidics positive displacement pumps, powder and liquid processing technologies, drying systems, micro-precision components, pneumatic components and sealing solutions, high performance molded and extruded sealing components, custom mechanical and shaft seals, engineered hygienic mixers and valves, biocompatible medical devices and implantables, air compressors and blowers, optical components and coatings, laboratory and commercial equipment, and precision photonic solutions. This segment serves food and beverage, life sciences, analytical instruments, pharmaceutical and biopharmaceutical, industrial, semiconductor, automotive/transportation, medical/dental, energy, cosmetics, marine, chemical, wastewater and water treatment, research and aerospace/defense markets. The FSDP segment designs, produces, and distributes firefighting pumps, valves and controls, rescue tools, lifting bags, and other components and systems for the fire and rescue industry; engineered stainless steel banding and clamping devices for various industrial and commercial applications; and precision equipment for dispensing, metering, and mixing colorants and paints used in retail and commercial businesses. IDEX Corporation was incorporated in 1987 and is headquartered in Northbrook, Illinois.

ITT Inc., together with its subsidiaries, manufactures and sells engineered critical components and customized technology solutions for the transportation, industrial, and energy markets in the United States and internationally. The Motion Technologies segment manufactures brake pads, shims, shock absorbers, and energy absorption components; and sealing technologies primarily for the transportation industry, including passenger cars, trucks, light- and heavy-duty commercial and military vehicles, buses, and trains. This segment sells its products under ITT Friction Technologies, KONI, Wolverine Advanced Materials, Axtone, Novitek, and GALT. brand names. The Industrial Process segment provides industrial pumps, valves, and plant optimization and remote monitoring systems and services; and aftermarket solutions, such as replacement parts and services. It serves various customers in industries, such as chemical, energy, mining, and other industrial process markets. This segment sells its products under Goulds Pumps, Bornemann, Engineered Valves, PRO Services, C'treat, i-ALERT, Rheinhütte Pumpen, and Habonim brand names. The Connect & Control Technologies segment designs and manufactures a range of engineered connectors and specialized products for critical applications supporting various markets, including aerospace and defense, industrial, transportation, medical, and energy. This segment provides connector products, such as circular, rectangular, radio frequency, fiber optic, D-sub miniature, micro-miniature, and cable assemblies; and control products consist of highly engineered actuation, flow control, energy absorption, environmental control, and composite component solutions for the aerospace, defense, and industrial markets under Cannon, VEAM, BIW Connector Systems, Aerospace Controls, Enidine, Compact Automation, Neo-Dyn Process Controls, Conoflow, and Micro-Mode brand names. The company was incorporated in 1920 and is headquartered in Stamford, Connecticut.