Stratasys Q2 2023 Earnings Call Transcript

There are 8 speakers on the call.

Operator

Greetings, and welcome to the Stratasys Second Quarter 2023 Earnings Call. At this time, all participants are in a listen only mode. A brief question and answer session will follow the formal presentation. As a reminder, This conference is being recorded. It is now my pleasure to introduce your host, Yonah Lloyd, Vice President, Investor Relations.

Operator

Please go ahead.

Speaker 1

Good morning, everyone, and thank you for joining us to discuss our 2023 Q2 financial results. On the call with us today are our CEO, Doctor. Yoav Zeif and our CFO, Eitan Zamer. I would like to remind you that access to today's call, including the slide presentation, is available online at the web address provided in our press release. In addition, a replay of today's call, including access to the slide presentation, will also be available and can be accessed through the Investor Relations section of our website.

Speaker 1

Please note that some of the information you will hear during our Today will consist of forward looking statements, including without limitation, those regarding our expectations as to our future revenue, gross margin, operating expenses, taxes and other future financial performance and our expectations for our business outlook. All statements that speak to future performance, events, expectations or results are Forward looking statements. Actual results or trends could differ materially from our forecast. For risks that could cause actual results to be materially different from those set forth Please also refer to our operating and financial review and prospects for 2022 and for the Q2 of 2023, which are included as Item 5 of our annual report on Form 20 F for 2022 and in Exhibit 99.2 to the report on Form 6 ks that we are furnishing to the SEC today, respectively. Please also see the press release that announces our earnings for the Q2 of 2023, which is attached as Exhibit 99.1 to a separate report on Form 6 ks that we are furnishing to the SEC today.

Speaker 1

Our reports on Form 6 ks that we furnished to the SEC on a quarterly basis and throughout the year provide updated current information regarding our operating results and material developments concerning our company. Stratasys assumes no obligation to update any forward looking statements or information, which speak as of their respective dates. As in previous quarters, today's call will include GAAP and non GAAP financial measures. The non GAAP financial measures should be read in combination with our GAAP metrics to evaluate our performance. Non GAAP to GAAP reconciliations are provided in tables in our slide presentation and today's press release.

Speaker 1

I will now turn the call over our Chief Executive Officer, Doctor. Yolav Zeif. Yolav?

Speaker 2

Thank you, Yonah. Good morning, everyone, and thank you for joining us. Before we discuss our results for the quarter, I would like to provide a brief update on the M and A activities taking place. As we announced on July 17, our Board, after consultation with its financial advisor and outside legal counsel, Unanimously determined that the July 13 revised unsolicited proposal by 3 d Systems Corporation would reasonably be expected to result in a superior proposal as defined in Stratasys merger agreement with Desktop Metal. To determine whether 3 d Systems would ultimately make a superior proposal, Stratasys is conducting The necessary due diligence on 3 d Systems business and prospects.

Speaker 2

As the majority of the consideration It's based on shares of 3 d Systems. We continue to work closely with 3 d Systems on the information they have provided and will provide an update at the appropriate time. As the Board continues to support our efforts To maximize value for all Stratasys shareholders, it is important to keep in mind that our Board has not determined The 3 d Systems proposal in fact constitutes a superior proposal. Furthermore, the Board has not changed It's unanimous recommendation to pursue the transaction with Desktop Metal and we will continue to work Towards closing it, as always, we are focused on pursuing the path that will deliver the greatest value for our shareholders. Our business is strong as evidenced by our 2nd quarter results And we are well positioned for continued success regardless of the outcome of these developments.

Speaker 2

Additionally, Nano Dimension recently announced that it will no longer pursue its partial tender offer to acquire Stratasys. Following the offer expiration on July 31, 2023, Nano also announced that it withdraw its director nominees for the Stratasys Board at our Annual General Meeting of Shareholders that took place yesterday. We thank our shareholders for their feedback and are pleased that our shareholders voted to reelect each of Stratasys' Director nominees to continue supporting our efforts to execute on our strategy, To deliver significant long term growth and maximize value for our company and our shareholders. That said, the purpose of this call is to discuss our financial and operating results, And we ask that you keep your question to that. Turning to the results, our strong second quarter results Represent another consecutive quarter of solid performance marked by record recurring revenues from consumable sense and customer service revenues.

Speaker 2

These results demonstrate the success of our winning strategy, which includes our leadership position in 5 polymer additive manufacturing technologies, resilient business model and strong financial profile. The work we've done to execute our strategy has put us on track to Our medium term forecast is a standalone company of generating more than $1,000,000,000 in organic revenue in 2026 Without significant M and A activity, in addition to making substantial improvements And profitability over the coming years. We believe that this expectation will be further bolstered by the addition of Desktop Metal. Together, we believe we are positioned to achieve outsized growth and create long term shareholder value for years to come. We accomplished these results Against the ongoing challenging macro backdrop that continues to be marked by slower growth And higher interest rates as the global economy works to overcome recent periods of high inflation.

Speaker 2

Despite the macro situation, I'm pleased that customer demand and our engagement With both our installed base and new customers is stronger than ever. Our results show that our customer recognize That we offer a unique combination of industry leading polymer technologies, the broadest set of polymer materials, A unified software platform across the portfolio, unmatched go to market capabilities and excellent customer service. But we are not stopping there. Our suite of technology offering continue to expand As we broaden our customer reach and gain share, particularly in manufacturing applications, Our resilient and recurring business model delivered adjusted gross margin this quarter that were 90 basis points higher compared to the year ago period and 120 basis points higher sequentially. Additionally, We improved OpEx spending as a percentage of revenue relative to the corresponding period last year.

Speaker 2

As a result of our efforts and despite the headwinds faced, I'm proud That we delivered positive adjusted earnings per share for the 8th consecutive quarter. Our vision for the future of additive manufacturing and our leadership position in this industry is more robust than ever. We ended the quarter with a strong balance sheet of over $200,000,000 in cash and equivalents and no debt, even after the closing of Covestro assets acquisition. This continues to support our growth through organic investments and accretive acquisition opportunities, including early But highly compelling technology driven businesses, which we believe will further improve results as we leverage our infrastructure and experience to strengthen operations. Now let me touch on some of the milestones we achieved in the Q2 of 2023.

Speaker 2

In Dental, the 2nd quarter With the Q1 of availability for entry level J3 Dentajet printer, as well as our disruptive Digital denture solution, TRUDENT, and we are off to a fast start. The new J3 DentaJet For mixed trade of various dental parts, it seems strong U. S. And EMEA customer response. And as noted last quarter, TRU Dent is the only FDA cleared full color monolithic 3 d printed denture solution on the market.

Speaker 2

We have already sold a number of these systems, including to Posca Brothers, Artisan and Express, 3 U. S. Dental labs, notably the top 5 producers of dentures in the U. S. Are either committed All deep within their evaluation process and likely to buy.

Speaker 2

We are also still on track for European availability next year And I've already engaged with the top 10 European denture producers. The feedback has been excellent, And we look forward to updating you next year when we receive CE approval and can begin commercialization. As a reminder, denture is an over $5,000,000,000 addressable market with only 5% coming from additive manufacturing today. Our leading technology and offerings are designed to further penetrate that impressive TAM and will drive sales in a large and growing segment. On the industrial side, we had a strong quarter for the Stratasys F900, Our largest format FDM system designed for high end parts and tooling applications.

Speaker 2

Most of the units were sold into aerospace, automotive and defense verticals. For production part manufacturing, F-nine hundred purchases included existing customers such as BMW and Lucid for factory production tooling, The U. S. Air Force and new customers including Konak, the Commercial Aircraft Corporation of China, which purchased 2 units to begin their path toward FDM flight pumps. After a successful beta program featuring customers in the U.

Speaker 2

S. And EMEA, we launched our PA12 material for SASS. PA12 is a highly versatile polymer and the most requested material in powder bed fusion. Combining PA12 with the consistency of SaaS technology opens up a world of high volume applications that require advanced level of dimensional accuracy with a lower cost per part. Along with our channel partner TCL Offman in Australia, we announced a partnership With walk in show Andrati United Racing team to encode the new AM hub with a new Stratasys Fortus 450MC 3 d printer, their second such printer.

Speaker 2

The team uses 3 d printing To prototype and produce parts faster and more accurately that perform Well in challenging racing environments, we are proud of the continued progress and contributions Our technologies are making in the highly demanding arena of automotive racing all over the world. Also in automotive, we announced that Peugeot has integrated our innovative 3 d fashion technology Into the interior of its new inception concept, achieving a level of resolution Not possible using traditional embellishment methods, the car incorporates a revolutionary interior design And features advanced materials produced exclusively using Stratasys J850 textile 3 d printers. Turning to medical, in the Q2 we forged a joint development and commercialization agreement with CorePlant Biotechnologies to transform healthcare with industrial scale bioprinting of tissues and organs. The initial focus of the relationship will be around development of bioprinting solution for coal plants, Regenerative breast implants and represents a $2,600,000,000 opportunity. Further, the combination of our P3 technology based bio printer with their RH collagen based bio inks is ideal for future innovation and production of additional human tissues and organs.

Speaker 2

Both companies have agreed to cross promote their respective bioprinting products and we look forward to collaborating toward Just last week, we celebrated the FDA clearance of Axial3D's automated Cloud based medical segmentation software. As a reminder, we invested in Axial3d, A cloud based AI driven 3 d printing platform that enables easy segmentation of CT and MRI For an atomic model, healthcare providers and medical device company use a cloud service to quickly go from Scan to 3 d printed anatomic models without large upfront capital expenses. The affordability and scalability can help accelerate adoption of 3 d printed medical models across thousands of hospitals. This is an important milestone that the ability to help global medical device manufacturers deliver patient specific surgical solution Holds the promise of multimillion dollar agreements with them. And the key is speed and efficiency.

Speaker 2

FDA clearance is expected to provide a major boost towards scaling up production processes. Turning to Slide 9. Early in the quarter, we announced the revenue generating premium version of our flagship GrabCAD print software. GrabCut Print Pro is designed to improve efficiency of the print preparation process For our SDM and SaaS customers and we will be extended it to our other 3 d printing technologies in the months ahead. We are now automatically attaching it to new FDM and soft system purchases.

Speaker 2

We generate a recurring revenue stream. GraphCut Print Pro also includes capabilities from our Riven acquisition Integrated as accuracy center, which reduces the number of prints in order to achieve even more accurate pump. You may recall that last year we acquired Ribbon, an AI software company, which helps customers Quickly create consistently accurate and use production part at scale. The response is encouraging with several initial purchases during the quarter, including Boeing, over 75 companies are Trial in GrabCAD Print Pro and we have plans to roll out an additional revenue generating software solution later this year. As we continue to focus on adding value for customers, while increasing recurring revenue through significant software enhancements.

Speaker 2

During the Q2, we closed the acquisition of Covestro's Additive Manufacturing Materials business, which expands our differentiated 3 d printed materials offering in Stereolithography, DLP and powders to address more manufacturing industry application. We welcome the R and D facilities, global development and Sales teams around the world, a portfolio of 60 materials for additive manufacturing and their extensive IP portfolio to our leading suite of consumables offerings. The addition of Covestro yielded immediate results and contributed to another record quarter of consumable revenues. We expect to introduce new materials resulting from the acquisition later this year. Our technological innovations, best in class sales channels and key partnerships Contributing to our effort to build on our meaningful foundations for growth that will drive our industry leadership for long term.

Speaker 2

I will now turn the call over to our CFO, Eitan Zamir, to share the financial results and update on our outlook for the rest of 2023. Eitan?

Speaker 3

Thank you, Yaav, and good morning, everyone. As Yaav mentioned, we achieved another quarter of solid results against a persistently challenging backdrop in our customers' capital spending cycles. We are particularly proud of how we improved both gross and operating margin, which shows the progress We continue to make in driving efficiencies across the platform. Overall, Our results reflect the resilience our diversified offerings provide, the signs of Acceleration in sales of manufacturing oriented systems and the continued strong utilization of our systems by our customers. Now let me dive deeper into the numbers.

Speaker 3

For the Q2, consolidated revenue of $159,800,000 was up 2% adjusted for constant currency and MakerBot relative to Q2 2022. In aggregate, revenue was down 4.1% and down 3.7% at constant currency compared to Q222. OEM revenue, which excludes both MakerBot and FDM, was up 3.3% at constant currency from prior year period. Product revenue in the 2nd quarter declined by 5.7% to $109,100,000 compared to the same period last year and was up 1.5% excluding MakerBot and on a constant currency basis. Within product revenue, system revenue declined by 17.9% to $48,300,000 compared to $58,900,000 in the same period last year.

Speaker 3

Excluding MakerBot and at constant currency, system revenue was down 8.1%. On a sequential basis, System revenues grew 19.4%, indicative of the improving conditions we see in the market and the continued strong levels of engagement we see with our customers. Specifically, we saw strength in automotive, aerospace and government for true production of end use parts, as you have noted earlier. Consumables revenue rose by 6.9% to $60,800,000 compared to the same period last year and rose by 7.3% on a constant currency basis and by 10.8% at constant currency, excluding MakerBot. This represents Another record level for Stratasys.

Speaker 3

Service revenue, including SDM, was 50,700,000 Essentially flat as compared to the same period last year. After backing out SDM, It was up 3.8% and up 4.1% at constant currency. And our customer service revenue was the highest ever, a further testament to the growing utilization rates of our system. Within service revenue, customer support revenue, excluding divestitures, grew 8% compared to the same period last year and increased by 8.5% on a constant currency basis. Now turning to gross margin.

Speaker 3

GAAP gross margin was 41.5% for the quarter, compared to 40.5% for the same period last year. Non GAAP gross margin was 48.5% for the quarter compared to 47.6% in the same period last year. The improvement in gross margin was driven by lower freight costs and the divestiture of MakerBot, which helped offset lower year over year hardware sales. GAAP operating expenses were $99,900,000 compared to $90,900,000 during the same period last year. The increase in GAAP operating expenses reflected in large part a one time extraordinary costs associated With Nano Dimension expired partial tender offer and withdrawn proxy contest, 3 d systems proposal and the combination we announced with Desktop Metal.

Speaker 3

Non GAAP operating expenses were $72,500,000 compared to $77,400,000 during the same period last year. This decrease reflects the divestiture of MakerBot and tight OpEx management, which more than offset the inclusion of Covestro in the quarter. Non GAAP operating expenses were 45.4 percent of revenue for the quarter, compared to 46.4 percent for the same period last year, as we continue to focus on operational efficiency improvements. We continue to manage our costs, delivering relatively low OpEx to improve non GAAP operating profitability. Despite the lower revenue, reflecting the scalability of our model.

Speaker 3

Regarding our consolidated earnings, GAAP operating loss for the quarter was $33,700,000 compared to a loss of 23,500,000 for the same period last year, reflecting the one time extraordinary cost described earlier. Non GAAP operating income for the quarter was $5,000,000 compared to $1,900,000 for the same period last year. The change is attributable to a 110 basis point improvement in non GAAP OpEx as a percentage of revenue, which more than offset the decline in revenues. GAAP net loss for the quarter was 38.6 or $0.56 per diluted share compared to a net loss of $24,400,000 or $0.37 per diluted share for the same period last year. The increase in GAAP net loss was due in large part To the costs associated with Nano Dimension's expired partial tender offer and withdrawn proxy contest, 3 d Systems proposals and the combination we announced with Desktop Metal, which are excluded from non GAAP.

Speaker 3

Non GAAP net income for the quarter was 2,500,000 or $0.04 per diluted share compared to net income of $1,200,000 or $0.02 per diluted share in the same period last year. We are proud to report that this was our 8th consecutive quarter of delivering Positive net income on an adjusted basis. Adjusted EBITDA was $10,600,000 for the quarter, compared to $7,400,000 in the same period last year, which reflects a 220 Basis point improvement year over year on a percentage of revenue basis. As you see on Slide 16, we used $23,200,000 of cash in our operations during the Q2, compared to the use of $22,800,000 of cash in operations for the same quarter last year. The use of cash was primarily driven by the timing of annual incentive payments, increases in accounts receivable and costs associated to acquisitions, proxy contests and related professional fees.

Speaker 3

We ended the quarter with $205,400,000 in cash, cash equivalents and short term deposits, which in part reflects the impact of closing Covestro in the quarter. Our balance sheet and cash generation remains strong. Specifically, we are well capitalized and well positioned to capture value enhancing market opportunities as they are identified, including the pending transaction with Desktop Metal. Now let me turn to our outlook for 2023 and the medium term. We are reiterating our revenue guidance of $630,000,000 to $670,000,000 Due to timing, we anticipate continued sequential quarterly growth this year, with 3rd quarter Higher than 2nd quarter and the 4th quarter should be our largest.

Speaker 3

From a gross margin perspective, We continue to expect full year 2023 to be in the range of 48% to 49%, with improved year over year growth in the second half of twenty twenty three. We expect our margins to get back over 50% next year. In 2023, we expect our non GAAP operating expenses to be in the range of approximately $290,000,000 to $300,000,000 We continue to expect Non GAAP operating margins to be in the range of 2.5% to 3.5% for the full year. In the medium term, we expect non GAAP operating margins to achieve double digits as our growth plan unfolds. We anticipate a GAAP net loss of $115,000,000 to $96,000,000 or $1.66 to $1.39 per diluted share and non GAAP net income of 9 to $17,000,000 or $0.12 to $0.24 per diluted share for the full year of 2023.

Speaker 3

Our GAAP results and thus our outlook includes the one time extraordinary costs associated with the proxy contest and merger related activities. Adjusted EBITDA is expected to be in the range of $35,000,000 to $50,000,000 for the year. Capital expenditures are expected to range between $20,000,000 to $25,000,000 for the year. Despite the near term challenges that persist due to macroeconomic conditions and the corresponding capital investment down cycle by our customers, we are reiterating our medium term targets discussed On our last call. Those targets are for non GAAP gross margins above 50% and positive free cash flow starting next year.

Speaker 3

By 2026, we continue to expect our revenue from organic growth To surpass $1,000,000,000 with adjusted EBITDA margin surpassing 15%, driven by our innovative growth engines as we penetrate further into manufacturing and healthcare applications. Please note, these figures are for Stratasys standalone and do not include anticipated benefits from our pending combination with desktop meta. In summary, we generated strong financial results against the continued Challenging backdrop and we remain encouraged by the level of engagement with our customers and confident in our long term growth and profitability potential. With that, let me turn the call back over to Yoav for closing remarks. Yohav?

Speaker 2

Thank you, Eitan. Our customers' appreciation And adoption of 3 d printing continues to grow, as we are An increasingly essential part of their efforts to bring more agility, flexibility and profitability to the global manufacturing operations. I also want to acknowledge and thank the employees of Stratasys. They have further the execution of our strategy with excellence, helping to make Stratasys The healthiest and the strongest growing business in our industry. We look forward to the future and we remain unwaveringly committed to delivering on our plans As we seek to generate long term value for our shareholders.

Speaker 2

With that, Let's open it up for questions. Operator?

Operator

Thank you. Before we open the floor Our Chief Executive Officer, Joao Zeiss, would like to make a brief statement.

Speaker 2

Thank you, operator, and good morning, everyone, to join us. Before we begin Q and A, As an update on 3 d, I want to be very clear. We have been meeting with And exchanging significant information with 3 d is part of our deciding if a 3 d combination can result in a superior proposal to the one we signed with Desktop Metal. We have had a number of joint meetings and exchanges of information and have more already scheduled So we can arrive at an informed decision as soon as practicable. As always, there can be no certainty that the transaction will result And note that we have a signed agreement with Desktop Metal.

Speaker 2

We believe These things are best done privately and constructively. And as I said, we aren't going to be taking any questions on M and A. Now let's get to our earnings, which illustrate the progress we have made. And now operator, please open it up for questions.

Operator

Thank you. We will now be conducting a question and answer Please hold while we hold for questions. Our first question comes from Greg Palm with Craig Hallum. Please go ahead.

Speaker 4

Yes. Hey, thanks, everyone. Thanks for taking the questions. I guess just starting off with Maybe the quarter and the outlook, I'm just curious, just in terms of visibility levels, what's changed, What's the same, anything better, anything worse than a few months ago? And just maybe relative to some of the peers or others that Playing the capital equipment space, a little bit better results.

Speaker 4

I'm just curious in terms of the outperformance where it's coming from.

Speaker 2

Thank you, Greg, and good morning. So no doubt that The entire industry is operating in a challenging environment because we are in a deflection point and we are moving to manufacturing, but manufacturing Players are facing also economic challenges and put kind of a break On their CapEx, so all of us are operating in a challenging environment. However, The nice thing in Stratasys is that we are very diversified and we are providing a full solution Across the product development life cycle, but also across verticals, which allow us to be quite Diversifying. And on top of it, we have very clear set of growth engines. The first thing that happened over the last 3 years that we Almost tripled our addressable market.

Speaker 2

Then we also made some acquisitions that Suddenly we see them in the market and they are contributing both revenues and profitability. So when you put this together, the Covestro and the strong material offering that we have and the growth in consumable and Current revenue plus new offering in Denta plus new launches that we will have this year and put everything together Into one strong infrastructure in the market of go to market and An amazing network of partners that feed us with information about the market 2 very strong systems. We have good visibility for H2. We have good visibility and we see the light at the end of the tunnel. It's starting in the U.

Speaker 2

S. It's a bit better. You can see it also on our hardware sale that Significant improvement from Q1, which above 19%, 19.4% Improvement from Q1, so when you put everything together, the growth engine, the acquisition, The go to market and the infrastructure that we have, we are such a structured company, we have good visibility for H2. And that's why we kept our guidance.

Speaker 4

Okay, great. And just in terms of guidance next year and In one of the M and A slide decks, you put out some base case and downside case scenarios for Stratasys as a standalone business. And I Just wanted to maybe dig into that a little bit further because the base case 20 plus percent growth relative to This year at the midpoint and even in a downside case, pretty strong double digit growth. So I know that's not guidance Per se, but what gives you maybe the visibility next year that you think you can reaccelerate growth to that extent?

Speaker 3

Thanks, Greg, for the question. It's Eitan. So as a start, you related to

Speaker 2

the 2

Speaker 3

models. Keep in mind that some of the drivers that you are related to are the same answer for this Right. The acquisition of Covestro, that's something that did not impact our revenue at the beginning of the year. In 2024, it's going to hit Full year and we believe that we can grow that business. When you think about the acquisition of Origin, Xaar, which is SAF and RPS.

Speaker 3

Those businesses continue to grow and will have more and more impact as we go to manufacturing And we continue our journey. The denture that Joao mentioned, all these growth driver and keep in mind that the beginning of 2023 And even now is in unstable macro environment. So when you take all these together, We have the infrastructure, the business, the go to market that can enable us to grow significantly Year over year in normal macroeconomic environment, add to that the software, which is another growth engine for us And you get a complete picture of many growth drivers that could get us there.

Speaker 4

Okay. Thanks for the help. I'll hop back in the queue.

Operator

Thank you. Our next question comes from Shannon Cross with Credit Suisse. Please go ahead.

Speaker 5

Thank you very much. I also wanted to talk a bit about what you saw during the quarter and guidance. We just got off the 3 d Systems Call where they talked about pushed out orders that they saw during the quarter, which then closed in July, but they're seeing Further push out. So I'm just wondering maybe if you can talk about linearity during the quarter. Are you seeing delays In terms of order rates and maybe I don't know if you can just sort of contrast it to I don't know if different product sets that 3 d Systems has versus yours, but again, it's kind of a tale of 2 cities in terms of the commentary during the calls.

Speaker 5

And then I have a follow-up. Thank you.

Speaker 2

So we definitely see longer sales cycle, but we don't see significant push of orders Going forward. And I guess it's also related to our Diversification geographically across different customers, but also the improvement in the U. S. So the U. S.

Speaker 2

Is still the overall economy is still shrinking because you can see it in the Purchasing Managers Index. But it's less severe than it was in the past, in the last three, four quarters. So kind of the wave of Economic challenge move to the other side of the ocean and we are U. S. Based, 60% of our revenues.

Speaker 2

So we do see much better customer engagement, very strong, Especially in the U. S. So the demand is there with a longer sales cycle, but we specifically didn't see a push in order to the next quarter. Real question.

Speaker 5

Okay. Thank you. And I'll see if you can answer this. We'll try it. You're undergoing initial integration work looking at Desktop Metal.

Speaker 5

I'm just curious as you're doing that, Has anything changed in terms of what you saw going into the acquisition? Are you are there like what areas are you Thinking are most complementary. Just kind of curious as to how that's going.

Speaker 2

So we don't see any change. And we still believe in what we Announced and published about the complementary of those two businesses. So Desktop Metal are bringing the best metal solution that If there will be a metal solution in mass production, it will be desktop metal for sure. And they bring amazing position in dental. They are the leader in digital casting, which is large Format part of metal and they are super innovative.

Speaker 2

And when you combine this with Stratasys Polymer leading position, with go to market, which is the best in the industry, and with Stratasys infrastructure, we see great complementarity between the two companies, And that's why we signed the agreement.

Speaker 5

Great. Thanks so much.

Speaker 2

Thank you.

Operator

Thank you. Our next question comes from Brian Drab with William Blair. Please go ahead.

Speaker 6

Hi, thanks for taking my question. I just wanted to clarify on Covestro, just how much that contributes to growth and how you think about with respect to organic revenue growth, because this company was a the deal was closed on April 5 And so that you get a full quarter than in the Q2 of Exvestro revenue, it's about 3 points of growth. I'm just wondering how are you thinking about those Roughly 3 points of growth with respect to which I think you said today 2% organic revenue growth for the company for the quarter. Is that in there?

Speaker 3

Hi, Brian. So first to Related to your question about Covestro, you're right, the deal closed at the beginning of April and contributed $4,600,000 for the quarter. We believe that business will grow already in 2023 and And anticipated further growth in 2024. That business complements our other businesses. Our go to market can leverage that business.

Speaker 3

So we see a significant growth and good business From Covestro. I will add to that, that our consumable business and keep in mind that Covestro is entirely consumable Grew even without Covestro when you compare year over year, which I believe that was part of your question. So our business grew further with Covestro, but also without Covestro.

Speaker 6

Okay. And you made the statement 2% organic revenue growth excluding FX and MakerBot. And I didn't If I exclude Covestro's organic then down 1%, is that fair? That should be an acquisition revenue, right? I am just trying to clarify.

Speaker 6

I am just a little confused.

Speaker 3

Yes. So I believe we provided both. So we provided the Covestro revenue in order for you to be able to model.

Speaker 4

Okay.

Speaker 3

So you have the MakerBot, which is Much more significant that was divested in August 2022. And I believe we provided and that's why I mentioned The growth in the consumable with and without Covestro, but to your question, the 2% includes Covestro.

Speaker 6

I may have just missed that. You did it both ways. Okay. And Covestro should help margin somewhat, right, that you're cutting kind of cutting out the middleman and not having to pay the on these many consumables that you sourced from them in the past?

Speaker 3

Correct. Covestro is a healthy business as far as it's concerned with the profitability. Yes.

Speaker 6

Great. Okay. Thanks for taking my question.

Operator

Thank you. Our next question comes from Troy Jensen with Lake Street Capital Markets. Please go ahead.

Speaker 7

Hey, first off, Denalyn congrats on really nice results here.

Speaker 3

Thank you, Troy.

Speaker 7

Hey, so Maybe for you, dental, I know it's a big focus for you guys. I guess, to me, I think about 2 different kind of big applications. So there's PolyJet for dentures or there's SLA for more like aligners. Which one do you think is kind of like better for you guys or the near term opportunity? Or when you talk about the dental market, is it one more than the other?

Speaker 2

Good morning. Maybe I'll take a step back and I'll start with our dental offering. We Because we are offering PolyJet, what we call DentaJet and also J3 DentaJet and J5. And those are by far the leading inkjet machine in Dentar. Focusing on Dentar with great cost per part, with Versatility with flexibility with the ability to print different application on the same tray, that's on the PolyJet.

Speaker 2

Then we have The DLP, with all the advantages of our P3 technology, which mainly it's the best surface finish In the industry in DLP and the meaning of it that there are some applications like splint where you need this surface finish where we are Really leading in terms of value to the end customers. And last but not least, we have the SLA offering. And also in the future, I believe also the SAF will be able to contribute to the aligners. So the SLA And SAF can be a great solution with great cost per part for the aligners business. So this is like the overall Portfolio, our belief is that in the long term, the winners will be the PolyJet And the DLP, also in aligners by the way.

Speaker 2

Although we are investing and we have other solutions for aligners, We believe that that would be the solution and this is where we are investing. And in the short term, no doubt That it's those 2 technologies starting with the denture application which is unique to Stratasys. It's IP protected, unique to Stratasys. No one else in the world can Print monolithic dentures in one print without the labor needed in order to glue the 2 to the gingiva, It's a transformation and we will improve the material as we go and we believe it will be a standard, The next standard in dentures and you will see, which is a $5,000,000,000 market only in the U. S.

Speaker 2

So we are very optimistic about this. It can be much bigger than Stratasys as a whole. And on top of it of course our DLP, Which we invest a lot in order to make sure that DLT is becoming really plug and play in Dental.

Speaker 7

Awesome. Very detailed. Thank you. My follow-up, I just asked on the SAF stuff. You talked about Nylon 12 coming out here, Which I agree is a bigger market than that on 11 for you guys and big opportunity.

Speaker 7

But just are you still in kind of limited shipments with SaaS? And when do you think that's going to more Contributed bigger revenue growth?

Speaker 2

We made amazing improvement and progress with SAF over the last 6 months. Mainly on 2 aspects of the stuff. 1 is the P-eight wells, Which is like by far increases our addressable market because this is the standard And the P-eight twelve. But on top of it, we together with our software solution, And we talked about it in the script. We improved accuracy dramatically.

Speaker 2

And we keep making improvements and we have it in SDM and customers are coming to see, but we have A very deliberate introduction of the machine. Everybody needs to go through our SBL to make sure that he knows how to Operator, we are highly optimistic about this machine because No one has the value that we can deliver to customers in terms of cost per pound and accuracy.

Operator

Thank you. There are no further questions at this time. I would like to turn the floor back over to Yoav Zeiss for closing comments.

Speaker 2

So thank you very much everybody that joined the call. It's a pleasure to be part of this industry And to lead it as the most healthiest, strongest company in the industry with the 8th consecutive Quarter of profitability and I want to thank our teams for making it happen. And thank you for joining us and I'm looking forward to updating you again next quarter.

Earnings Conference Call
Stratasys Q2 2023
00:00 / 00:00