Materialise Q2 2024 Earnings Call Transcript

Quartr
Provided by Quartr
July 31, 2024

There are 6 speakers on the call.

Operator

Good day and thank you for standing by. Welcome to the Q2 2024 Materialise Financial Results Conference Call. At this time, all participants are in a listen only mode.

Speaker 1

After the speakers' presentation, there will be a question and answer

Operator

Please be advised that today's conference is being recorded. I would now like to hand the conference over to your first speaker today, Harriet Fried of LHA. Harriet?

Speaker 2

Good morning, and thank you for joining us today for Materialise's quarterly conference call. With us on the call are Birgitte Devett, Chief Executive Officer and Koen Berges, Chief Financial Officer. Today's call and webcast are being accompanied by a slide presentation that reviews Materialise's strategic, financial and operational performance for the Q2 of 2024. To access the slides if you've not already done so, please go to the Investor Relations section of the company's website at www.materialize.com. The earnings press release that was issued earlier today can also be found on that page.

Speaker 2

Before we begin, I'd like to remind you that management may make forward looking statements regarding the company's plans, expectations and growth prospects, among other things. These forward looking statements are subject to known and unknown uncertainties and risks that could cause actual results to differ materially from the expectations expressed, including competitive dynamics and industry change. Any forward looking statements, including those related to the company's future results and activities, represent management's estimates as of today and should not be relied upon as representing their estimates as of any subsequent day. Management disclaims any duty to update or revise any forward looking statements to reflect future events or changes in expectations. A more detailed description of the risks and uncertainties and other factors that could impact the company's future business or financial results can be found in the company's most recent annual report on Form 20 F filed with the SEC.

Speaker 2

Finally, management will discuss certain non IFRS measures on today's call. A reconciliation table is contained in the earnings release and at the end of the slide presentation. With that introduction, I'd like to turn the call over to Birita De Wet. Go ahead, please, Birita.

Speaker 3

Thank you, Harriest. Good morning and good afternoon, and thank you all for joining us today. You can find the agenda for our call on Slide 3. 1st, I will summarize the highlights of our financial results for the Q2 of 2024. Then I will take you through some of the progress we have made in realizing our strategic priorities over the last couple of months.

Speaker 3

And after that, I will pass the floor to Koen, who will go into our Q2 numbers in more detail. Finally, I will come back and explain what we expect the remaining months of 2024 to bring. When we've completed our prepared remarks, we'd be happy to respond to questions. Now looking at our key results for the Q2 2024, summarized on Page 4, I'm very pleased to announce that we performed strongly in all of our business segments and once again delivered profitable results this quarter. Looking at this quarter's results, we realized record quarterly revenue of EUR 68,800,000 growing more than 6% compared to an already strong Q2 of 2023 and with growth in all segments.

Speaker 3

We realized a gross margin of 57% in the 2nd quarter, which is up from the Q1 of this year and in line with the comparable period of 2023. And this solid performance enabled us to increase our adjusted EBIT to $3,900,000 representing 5.6 percent of revenue, while intensifying our investments, in particular in R and D. We generated a net profit of €3,900,000 or €0.07 per share. Our net cash position at the end of the 2nd quarter evolved to €67,500,000 up by €4,300,000 from the beginning of this year. Koen will elaborate further on these results in his remarks later in this call.

Speaker 3

Moving now to Slide 5. I am very pleased that again we made progress in our strategic priorities and achieved critical milestones, including the expansion in new market segments and the introduction of new technologies. First of all, we announced the acquisition of Fiaubs, a company specializing in AI driven simulation technology for structural heart intervention. This acquisition will create growth opportunities in the medical segment and is an important milestone in our journey towards mass personalization. The cardiovascular market and the structural heart market in particular is one of the markets we have been targeting with our personalized solution.

Speaker 3

Structural heart disease, such as heart valve diseases, posed a substantial medical and economic challenge as they are the leading cause of cardiovascular illness and death worldwide. Presently, 47,000,000 people are affected by heart valve diseases, and this number continues to rise. By 2,030, the global annual costs linked to the adverse outcomes are expected to reach USD 70,000,000,000. In the last 2 decades, interventions in structural heart have moved from open surgery to minimally invasive approaches, repairing or replacing heart valves via catheters. This created the need for better visualization and planning of the intervention.

Speaker 3

Based on our 3 d modeling and design capabilities, we developed and launched our MIMICS planner for structural heart interventions in 2019. This tool offers clinicians an interactive solution to plan and prepare their procedures. For example, by taking certain measurements to choose the right size of the device and plan how to best access the valve that needs to be replaced without blocking any important structures. This makes the procedure more precise and efficient, while ultimately ensuring better outcomes and safety for patients, thanks to this personalized approach. The integration of Fios into our family of cardiovascular solutions is a natural progression of our mission in heart space.

Speaker 3

Fiosk's predictive stimulation technology complements our Mimics platter, Adding advanced simulations that predict how medical devices like heart valves will interact with an individual patient's unique anatomy. Integrating the Fios technology and the Mimics Planner will enable clinicians to plan by taking anatomical measurements and to simulate the impact of the placement of the device, thereby enhancing the outcome of the procedure. I expect this acquisition to accelerate our strategy in the cardiovascular space, and we will certainly continue to update you on further progress in this space. The second highlight I'd like to spend some time on is the partnership with Nxop that we announced at RAPIDS in June. This partnership will create opportunities for us to tap into the market of printing serial and juice parts.

Speaker 3

Ntop has developed a powerful new implicit modeling kernel and corresponding file format that can characterize highly complex high performance geometries at a fraction of the size of traditional cut or mesh based models. Until now, high performance product designs created in NTOP requires time consuming translations for build preparation and production. Materialise's next gen build processor is a configurable software that translates large and complex 3 d design files into 3 d printable instructions, optimizing and managing the 3 d printing process from start to finish. By integrating EndOp's design software with Materialise's Magic and next generation build processors, these designs can be easily transferred natively to Materialise Magic for fast, high quality build preparation and slicing, thereby allowing manufacturers to accelerate the entire design to manufacturing process and enable the production of complex parts that were previously impossible to print. This is a significant development because the current trends towards more complex and larger 3 d printing files is posing challenges in terms of file size and processing time.

Speaker 3

This, in essence, created a barrier for our industry and limited further growth. The collaboration between Materialise and Nthop smashes this barrier by enabling the processing of complex and large design files. At Rapid, as an example, we show the 3 d printed cylinder had produced for Weixler, a global leader in innovative technologies and life cycle solutions in the marine and energy markets. On its journey to enable carbon neutral shipping and energy production, Wexler explored innovative designs to optimize the cooling performance of the cylinder head, achieving a 60% weight reduction compared to the original design. This new design also allowed the integration of up to 10 subsystems into the final component, reducing assembly complexity and improving cooling performance.

Speaker 3

Previously, the design complexity and file size of this innovative design made it impossible to 3 d print the parts using conventional large scale AM technologies. However, by combining Ntop's design software with Materialise's Magic and next gen build processor based on implicit modeling, it has become possible to 3 d print a part. We will now start onboarding customers in an early access program with Nikon SLM solutions being the 1st early access partner in this program. Now this partnership is an example of the type of collaboration our industry needs to unlock its full potential in the coming years. And this brings me to the 3rd highlight, which is an initiative to enhance industry wide collaboration.

Speaker 3

In my first 6 months as CEO, I have urged the industry to unite in removing the remaining obstacles to 3 d printing adoption. Advancing our industry is possible, but to unlock the full potential, we need collaboration. The collaboration with Nthop that I just talked about is one example of how together we can enable industry growth. And there are many other ways to collaborate. In April, we brought a large group of industry stakeholders and customers together at our headquarters to discuss specific collaboration ideas.

Speaker 3

The response was overwhelmingly positive, and I was very encouraged to push ahead with the various initiatives that we will undoubtedly talk more about later this year. Now Koen will take you through the detailed financial results by segment.

Speaker 4

Thank you, Brigitte. Good morning or good afternoon to all of you on this call. I'll begin with a brief review of our consolidated revenue on slide 6. As a reminder, please note that unless stated otherwise, all comparisons in this call are against our results for the Q2 of 2023. In this year's Q2, total revenue increased 6.2 percent to €68,800,000 which is as Brigitte already indicated the highest quarterly revenue we have ever realized.

Speaker 4

We can report growth in all three of our business segments. Our Medical segment turned in another very strong performance and increased its revenue by 13%. In spite of continued challenging market conditions impacting manufacturing and further conversion of our software business model, also our manufacturing and software segments each grew by 2% in the 2nd quarter. As you can see in the graph on the right side of the page, Materialise Manufacturing accounts now for 43%, Materialise Medical for 41% and Materialise Software for 16% of our total revenue during the Q2 of 2024. Over the first half of twenty twenty four, we generated over €132,000,000 of revenue, which is 1.3% above the strong first half of twenty twenty three, while we were still behind last year after the Q1.

Speaker 4

The amount of deferred revenue on our balance sheet coming from software license and maintenance fees amounted to almost €44,000,000 at the end of June 2024. On slide 7, you'll see our consolidated adjusted EBIT and EBITDA numbers for the Q2 of this year. Consolidated adjusted EBIT increased to €3,900,000 compared to minus €600,000 for the corresponding period of 2023, in spite of significantly increased R and D investments this year, mainly in our Medical and Software segments. Our adjusted EBIT margin was 5.6% compared to minus 0.9% last year. Consolidated adjusted EBITDA for the 2nd quarter amounted to €9,200,000 increasing from €4,800,000 in 2023.

Speaker 4

The adjusted EBITDA margin reached now 13.4% compared to 7.3% the prior year. It should be noted, however, that the Q2 of last year included the effect from an adverse arbitration award, which amounted to minus €5,200,000 which was not adjusted in the reported numbers at the time. Over the first half of twenty twenty four, we have generated €6,500,000 of adjusted EBIT and €17,300,000 of adjusted EBITDA. Moving on to slide 8, you will notice that the quarter's total revenue in our Materialise Medical segment increased as of almost 13%, building further on an already strong revenue in 2023. This continued solid growth was generated by increased revenue coming from medical devices and services sales and by higher recurring revenue from medical software, which grew respectively by 19% 7%.

Speaker 4

Within our medical devices and services activity, we grew both in direct and in partner sales. As a result of top line growth and of cost discipline, the adjusted EBITDA of the Medical segment grew to €8,200,000 with an adjusted EBITDA margin that increased further to 29.1%. Over the first half of this year, our Medical segment realized revenue of €54,300,000 up by 10% from last year with an adjusted EBITDA of €16,100,000 representing 29.7% of adjusted EBITDA margin. Slide 9 summarizes the results of our Materialise Software segment. In the Q2, software revenue grew by almost 2%.

Speaker 4

The impact of our further transition to a cloud and subscription based business model was more than offset by tailwinds in our Preprint segment. Recurring revenue from software maintenance and license sales, including OEM, increased by 5%. On the other hand, non recurring revenue decreased by 6%. Over 70% of the revenue in our software segment is now considered to be recurring. This share is expected to grow further over the coming quarters with the new version of Magic's V28, which was released at Rapid in June being available on subscription basis only.

Speaker 4

After the launch of e Stage 1 metal in Q1 of this year, the first sales were already registered in Q2 and a new QPC partnership agreement with EOS was signed. In addition to the MTO partnership Brigitte referred to earlier, also important next gen PP partnerships with Assur Mittel and Renishaw were recently announced. In spite of the top line growth, the adjusted EBITDA in our Software segment decreased to €1,400,000 representing an adjusted EBITDA margin of 12.2%. As we further intensified our R and D development efforts on our factory management platform, CoEM. Over the first half of this year, our software segment realized revenue of €21,700,000 and an adjusted EBITDA of €2,500,000 representing an 11.4 percent adjusted EBITDA margin.

Speaker 4

Now let's turn to Slide 10 for an overview of the performance of our Materialise Manufacturing segments. Also in the Q2, manufacturing operated in a challenging market environment, which was mainly reflected in continued low prototyping demands. Nevertheless, we managed to grow revenue by 2% compared to the Q2 of last year, fueled by strong growth in AgTech and certified manufacturing. Here we posted stronger growth in our aerospace and medtech strategic focus areas. In spite of the top line growth and the further realization of operational efficiencies, cost pressure and less consulting income led to a lower adjusted EBITDA of €2,400,000 representing an adjusted EBITDA margin of 8.2%.

Speaker 4

Over the first half of this year, our Manufacturing segment realized a revenue of €56,400,000 with an adjusted EBITDA of €4,000,000 representing 7% adjusted EBITDA margin. Slide 11 provides the highlights of our consolidated income statement for the Q2 of this year. Our gross profit increased to €39,200,000 representing a gross profit margin of 57%, which is stable compared to the 57.2% realized in Q2 of last year. Direct cost increases were offset by efficiency gains and mix effects. Our operating expenses in the quarter increased by €3,500,000 or 10% in aggregate, with the largest increase coming from higher R and D spend, which grew by 17% compared to last year.

Speaker 4

R and D investments were mainly focused on Mimics platform developments in our Medical segment and on CoEM in our Software segment. Net operating income in the quarter was positive at €1,200,000 compared to a negative €4,500,000 last year, whereas I mentioned previously, last year included the impact of an adverse arbitration awards. As a result of all of these elements, the group's operating result in the quarter was positive at €3,800,000 compared to the minus €600,000 in last year's periods. In Q2, our net financial income amounted to €1,000,000 including a positive currency exchange result of €300,000 Interest income of €1,200,000 from our cash reserves more than offset the interest expense on our gradually decreasing financial debt. Income tax expense in the quarter amounted to roughly minus €1,000,000 and offset the financial impact.

Speaker 4

Now all of this results once more in net profit for the quarter equaling €3,900,000 representing €0.07 per share compared to a net loss of €500,000 or minus €0.01 per share for the corresponding 2023 periods. Now please turn to slide 12 for a recap of balance sheet and cash flow highlights. In the Q2 of 2024, our balance sheet remains strong. Our cash reserve at the end of the quarter amounted to Loan and release repayments reduced our gross debt to below €58,000,000 The resulting net cash position at the end of the quarter was €67,500,000 up by more than €4,000,000 compared to the position at the beginning of this year. Compared to the end of last year, our net working capital was reduced by €4,800,000 mainly as a result of reduced trade receivables and slightly higher trade payables.

Speaker 4

The latter partly being impacted by the recent CapEx investment that we made on the new active plants. Total deferred income position amounted to around €50,000,000 out of which almost €44,000,000 was related to deferred revenue from software license and maintenance contracts, as already mentioned. As you can see from the graph on the right of the page, cash flow from operating activities for the Q2 was strong, amounting to €8,400,000 Capital expenditures for the quarter, on the other hand, amounted to €8,500,000 mainly as a result of the peak in investments in the new AgTech plants that will start operating in coming weeks in line with the earlier announced project plan. Even with these high CapEx investments, our free cash flow over this quarter remained close to breakeven. Investments in the new AgTech plants will continue over the coming months as we gradually increase throughput capacity through additional machinery.

Speaker 4

And with that, I'd like to hand the call back to Brigitte.

Speaker 3

Thank you, Koen. Let's now turn to Page 13. I'll conclude my remarks with a discussion of our full year 2024 guidance. Given the strength of our operational performance halfway through 2024, we believe that we are well on track to deliver the gross targets we set at the beginning of this year. Accordingly, we continue to expect to report consolidated revenue for the full fiscal year 2024 within the €265,000,000 to €275,000,000 range we communicated earlier.

Speaker 3

We are also maintaining our adjusted EBIT guidance of €11,000,000 to €14,000,000 for 2024 in spite of the recent Fios acquisition that will weigh on OpEx in 2024 and into 2025, given the integration costs and further investments in its product portfolio. This concludes our prepared remarks. Operator, we're now ready to open the call to questions.

Operator

Thank you. At this time, we will conduct a question and answer session. Our first question comes from the line of Troy Jensen of Cantor Fitzgerald. Your line is now open.

Speaker 1

Yes, hi. Thank you. Congrats on the nice results here we get in June.

Speaker 3

Thank you, Troy.

Speaker 1

Hey, so a couple of questions, if you don't mind. So I want to start with the acquisition. I guess, I'd be curious on like the size of the organization. I'm assuming it's pre revenues right now, but does OpEx increases potentially because of the new headcount or some more insight would be helpful?

Speaker 4

Okay. Let me first from my end, Troy, try to answer on the financial side of the acquisition. As you know, we have not disclosed the purchase price as we also agreed that with the sellers. But I can confirm that the transaction will have no material impact on our net cash position. Nevertheless, as Birgitte explained, coming months will require further cash outs from our side as we will be accompanying FEEOPS in its further growth and as such we will support the further R and D investments and working capital needs they will have.

Speaker 4

The integration of FEEPS will initially have a limited negative impact on our EBIT, which we expect to gradually decrease in the coming months and over 2025 by further growing its revenue and by further implementing cost synergies. But at least on the coming quarters, that will still have an impact. As Bahita said, that we at least in this year be able think we can absorb within the guidance that we communicated earlier.

Speaker 3

Yes. And maybe one other element that might help you work through this. Fios is a growth company. So as Koen said, further investments required And as such, it's a small addition to our family, but an important one in terms of the strategic importance in this market.

Speaker 1

Yes, understood. When this does start to revenue, is this going to go into the medical business or the Speed 3 d software?

Speaker 3

Yes, absolutely. Yes.

Speaker 1

He'll go into medical, you're saying?

Speaker 4

Yes. Okay.

Speaker 1

And then can you remind I got a couple of questions on the software sets. Can you remind me how much of the medical business now is software? So If you look at the

Speaker 4

Our A business. It's around 30% of the total medical revenue that is related to software.

Speaker 1

Okay. All right, perfect. And then also on the 3 d, it's nice to see it grow. It's still kind of stuck to me in that $10,000,000 to $12,000,000 range. But I think you said 70% of revenues now are recurring.

Speaker 1

I'd be curious, has that been growing, Coon? And do you feel like we're at a stage now or a point where you can actually start to see growth in the software business?

Speaker 4

That is indeed going up quarter after quarter step by step. I don't think we are at the end of the journey there. So we will continue to see that conversion to the recurring business model continue for at least a couple of quarters. Until we've reached the end, we probably never get to 100%, but it will be a gradual journey that is going to continue and that will continue to impact our top line in the coming quarters, couple of years in that timeframe, I think we need to.

Speaker 1

All right. Understood. I'll just cease the floor here and let others ask questions, but congrats on the nice results.

Speaker 3

Thank you, Troy.

Operator

Thank you. One moment for our next question. Our next question comes from the line of Jacob Stefan from Lake Street Capital Markets. Your line is now open.

Speaker 5

Hey guys, thanks for taking my questions. I'll add congratulations as well on the solid quarter.

Speaker 3

Thank you,

Speaker 5

Jacob. I guess, first, starting off here, the large kind of year over year improvement in Medical segment EBITDA, can you just remind us Q2 of 2023, why EBITDA margins were down to just 11%?

Speaker 3

On the EBIT on the Medical segment specifically?

Speaker 4

Yes. That is the impact of the arbitration awards that was granted against us, I think, in the course of May of last year. And that was processed in the medical results and then also in our consolidated numbers in the Q2 of last year.

Speaker 5

Okay. Got it. Thank you. And then next question, manufacturing return to growth here this quarter, but prototyping demand has kind of been the weak spot in that segment. I'm just wondering kind of what you're seeing in the prototyping segment after a month of Q3 here And maybe how we can think about the AgTech utilization here?

Speaker 3

Yes. So maybe just a comment on the prototyping side, maybe less specifically to the quarter 3 number specifically, but more as to how you need to look at that, including the Q3. The prototyping market, we see a structural weakness, which I don't expect to disappear quickly. So we'll continue to see that as an industry and therefore also as materialize in our results. So that's one.

Speaker 3

So and then the second one is related to AgTech. Can you repeat your questions and make it specific on the AgTech side?

Speaker 5

Yes. I was just curious about capacity utilization with AgTech. How more to get a sense on how you're filling out the kind of additional capacity that you guys have been building there?

Speaker 3

Yes. So one thing to understand is that the opening of our additional plant is in September. So in our results so far year to date, obviously, that additional plant hasn't had an impact yet. Now we will expect to see so we do expect to start seeing that impact as of the opening of the facility. But it's going to be a very gradual impact as always when you open a new facility.

Speaker 3

There's a start up phase, so first of all. And then the second is that we do expect the fitting of the capacity, but also adding further capacity to continue over the next couple of months, quarters and years. That is a gradual process during which we will continue to add in the new building further machinery. So it's not a one step immediate impact that you would see. It's a gradual increase over the coming months and a period of 1 or 2 years.

Speaker 5

Okay. Very helpful. I'll hop back in the queue, but congrats.

Speaker 4

Thank you. Thank you.

Operator

Thank you. I'm showing no further questions at this time. I would now like to turn it back to Brigitte de Vette, CEO.

Speaker 3

Thank you, and thank you all for joining us today. We look obviously forward to continuing the dialogue with you as always through our investor conference, our 1 on 1 meetings or the various calls. And certainly, please reach out to us if you have any further questions. Thank you and goodbye to you all.

Operator

Thank you for your participation in today's conference. This does conclude the program. You may now disconnect.

Powered by Quartr
Earnings Conference Call
Materialise Q2 2024
00:00 / 00:00