Algoma Steel Group Q1 2025 Earnings Report

Algoma Steel Group EPS Results

• Actual EPS: -$0.33
• Consensus EPS: -$0.69
• Beat/Miss: Beat by +$0.36
• One Year Ago EPS: N/A

Algoma Steel Group Revenue Results

• Actual Revenue: $359.30 million
• Expected Revenue: $327.56 million
• Beat/Miss: Beat by +$31.74 million
• YoY Revenue Growth: N/A

Algoma Steel Group Announcement Details

• Quarter: Q1 2025
• Date: 4/29/2025
• Time: After Market Closes
• Conference Call Date: Wednesday, April 30, 2025
• Conference Call Time: 11:00AM ET

Algoma Steel Group (NASDAQ:ASTL) produces and sells steel products primarily in North America. The company provides flat/sheet steel products, including temper rolling, cold rolled, hot-rolled pickled and oiled products, floor plate, and cut-to-length products for the automotive industry, hollow structural product manufacturers, and the light manufacturing and transportation industries; and plate steel products that consist of rolled, hot-rolled, and heat-treated for use in the construction or manufacture of railcars, buildings, bridges, off-highway equipment, storage tanks, ships, and military applications. Algoma Steel Group Inc. was founded in 1901 and is headquartered in Sault Ste. Marie, Canada.

Algoma Steel Group Q1 2025 Earnings Call Transcript

Key Takeaways

• Our Q1 results reflected tariff uncertainty and evolving trade policy in the US and Canada, leading to softer realized steel prices, higher input costs, and a year-over-year decline in revenues and adjusted EBITDA.
• We continue to advance our electric arc furnace (EAF) project, commissioning critical systems and remaining on track to produce first steel in Q2 2025 with no material change to project cost or production guidance.
• Plate production is steadily ramping, with Q1 shipments at 91,000 tons, and we expect to reach or exceed 100,000 tons in Q2 as we move toward an annual run-rate capacity of over 650,000 net tons.
• Algoma’s balance sheet remains strong, ending the quarter with $226 million in cash and $587 million in total liquidity, fully funding the EAF transition without the need for incremental financing.
• Financially, the company reported a net loss of $24.5 million, an adjusted EBITDA loss of $46.7 million (–9% margin), generated $92.1 million in operating cash flow, released $138 million in inventory, and recognized a $50 million insurance receivable.

Presentation

[Operator]

Welcome to Agnomosil Group Incorporated First Quarter twenty twenty five Earnings Call. At this time, all participants are in a listen only mode. A question and answer session will follow the formal presentation. As a reminder, this conference is being recorded.

[Operator]

It is now my pleasure to introduce Michael Morocco, Vice President, Corporate Development and Treasurer. Thank you, Michael. You may begin.

[Michael Moraca, Vice President - Corporate Development & Treasurer at Algoma Steel Group]

Good morning, everyone, and welcome to Algoma Steel Group Inc. First quarter twenty twenty five earnings conference call. Leading today's call are Michael Garcia, our Chief Executive Officer and Rajat Marwa, our Chief Financial Officer. As a reminder, this call is being recorded and will be made available for replay later today in the Investors section of Algoma Steel's corporate website at www.algoma.com. I would like to remind you that comments made on today's call may contain forward looking statements within the meaning of applicable securities laws, which involve assumptions and inherent risks and uncertainties.

[Michael Moraca, Vice President - Corporate Development & Treasurer at Algoma Steel Group]

Actual results may differ materially from statements made today. In addition, our financial statements are prepared in accordance with IFRS accounting standards, which differ from U. S. GAAP, and our discussion today includes references to certain non GAAP financial measures. Last evening, we posted an earnings presentation to accompany today's prepared remarks.

[Michael Moraca, Vice President - Corporate Development & Treasurer at Algoma Steel Group]

The slides for today's call can be found in the Investors section of our corporate website. With that in mind, I would ask everyone on today's call to read the legal disclaimer on Slide two of the accompanying earnings presentation and to also refer to the risks and assumptions outlined in Algoma Steel's first quarter twenty twenty five management's discussion and analysis. Please note that our financial statements are prepared S. Dollar as our functional currency and the Canadian dollar as our presentation currency.

[Michael Moraca, Vice President - Corporate Development & Treasurer at Algoma Steel Group]

Please note all amounts referred to on today's call are in Canadian dollars unless otherwise noted. Following our prepared remarks, we will conduct a question and answer session. I will now turn the call over to our Chief Executive Officer, Michael Garcia. Mike?

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Thank you, Mike, and

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

good morning, everyone. Thank you for joining us to discuss our first quarter twenty twenty five results. Employee safety remains our highest priority and a core value. We continue to focus on this priority, emphasizing a culture of safety throughout the steelworks. With construction activity levels at the site continuing, maintaining a strong safety focus is more critical than ever.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Before turning to financial results, I want to highlight three important themes. First, our quarterly results reflect the continued challenging conditions across global steel markets, particularly due to tariff uncertainty and Canadian trade policy, which led to lower realized pricing and higher production cost. Second, we continued to advance EAF construction activities across the site and commissioned several critical systems, positioning us to achieve first steel production from our initial EAF during the second quarter with no material change to our project cost or 2025 production expectations. And third, our balance sheet and liquidity position remains strong, with over $226,000,000 in cash at quarter end and total liquidity of $587,000,000 We remain well funded to complete our transformative EAF project. The steel industry is navigating a period of elevated volatility, largely due to ongoing tariff actions creating uncertainty in both U.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

S. And Canadian markets as customers adjust purchasing patterns in anticipation of supply disruptions. This trade policy uncertainty has also impacted the U. S. Dollar exchange rate, influencing our raw material cost and competitive pricing position.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

We are managing our existing operations during this period to respond to rapidly changing market conditions, strategically adjusting our product mix between plate and coil products based on capacity and contractual obligations. Our first quarter results were in line with our expectations for shipments and adjusted EBITDA, which include insurance proceeds that Rajat will discuss shortly. The quarter reflected challenging market dynamics that began mid-twenty twenty four, driven by U. S. Election uncertainty, interest rate concerns and softening demand, factors that intensified with new U.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

S. Trade policies announced in March. As a result, we saw softer realized steel prices and higher costs, leading to an overall decline in revenues and adjusted EBITDA compared to the prior year. On a positive note, we continue to ramp up production at our fully modernized plate mill. For the quarter, plate shipments reached approximately 91,000 tons, up from 82,000 tons in Q4 of twenty twenty four and seventy 3,000 tons in Q3 of twenty twenty four.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Looking ahead, we expect Q2 twenty twenty five plate production to again be directionally higher as we continue to capitalize on our position as Canada's only discrete plate producer, steadily ramping toward our expected annual run rate capacity of over 650,000 net tons. We recently announced our participation in team vigilance, strengthening our position in the Canadian defense supply chain, and we are encouraged by the federal government's renewed focus on domestic military procurement and infrastructure spending, which we believe will support future demand for our plate products. Turning to our transformational electric arc furnace project. While unusually harsh weather conditions that began in November and persisted through much of the winter impacted project timelines, we used the opportunity to advance other work not on the critical path. This included commissioning the fume treatment plant and water treatment plant, positioning the furnace, and energizing the substation.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

We anticipate achieving first steel production from our initial EAF during the second quarter, with no material change to our project cost or twenty twenty five production expectations. Despite the challenging market conditions we have faced, our balance sheet and liquidity position remain robust. Once both furnaces achieve full operation, anticipate reaching a steady state shipping capacity of 3,000,000 tons annually. This production level will optimize our currently underutilized downstream finishing capacity, significantly enhancing our operational efficiency and cost structure. As of 03/31/2025, cumulative investment for the EAF project was $824,000,000 including $83,000,000 during the first quarter of twenty twenty five.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

All material aspects of the project have been contracted, and we continue to anticipate completing the remainder of the project, including those structured as time and material agreements within 5% of the upper end of the previously announced budget range. Our start up plan continues to include normal production from our existing steelmaking facility, while ramping up production from our EAFs throughout 2025 and 2026, followed by a complete transition to EAF production. As a significant milestone in this transition, we plan to shut down seven coke battery at our coke making facility later this summer. Seven battery is our least efficient battery, and we do not expect its shutdown to result in any increase to operating cost. This action reflects our confidence that our EAF transition plan remains firmly on track.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

In summary, despite very challenging market and weather conditions, we've maintained our focus on the safe operation of existing facilities, continued our ramp in plate production and are approaching first EAF steel production during the quarter. Steel markets have had periods of great volatility in the past. And during those times, we do what we always do, stay focused on the things within our control and never taking our eye off the ball as we prepare to take a tremendous step forward for our company and community. I'd like to once again thank all of our employees for their hard work, dedication and professionalism. Thank you, and I'll now turn the call over to Rajat for a deeper dive into our financials.

[Rajat Marwah, CFO at Algoma Steel Group]

Thanks, Mike. Good morning and thank you all for joining the call. As a reminder, all numbers are expressed in Canadian dollars unless otherwise noted. Our first quarter results included adjusted EBITDA that was a loss of 46,700,000.0 which reflects an adjusted EBITDA margin of minus 9% and cash generated by operating activities of 92,100,000 We finished the quarter with a strong balance sheet including $226,000,000 of cash and availability of $361,000,000 under our revolving credit facility. Now let me dive into the key drivers of our performance.

[Rajat Marwah, CFO at Algoma Steel Group]

We shipped 470,000 tons in the quarter, up 4.2% versus the prior year quarter. The prior year quarter shipments were lower due to the impact on operations from the utilities corridor collapse and subsequent blast furnace shutdown. Net sales realization averaged $986 per ton compared to $12.60 dollars per ton in the prior year period. The decrease versus the prior year level reflects weakening market conditions, partially offset by improvements in value added product mix as a proportion of sales. This resulted in steel revenue of $463,000,000 in the quarter, down 18.5 versus the prior year period as lower realized selling prices more than offset higher shipments.

[Rajat Marwah, CFO at Algoma Steel Group]

On the cost side, Algoma's cost per ton of steel products sold averaged $11.37 in the quarter, up 4% versus the prior year period on account of higher utility costs due to harsh winter conditions and tariffs. Starting March 12, the company has been subject to 25% tariff on all outbound steel shipments to The United States, and for the first quarter, tariff costs were $10,500,000 which was included in cost of sales. Net loss in the quarter was $24,500,000 compared to net income of $28,000,000 in the prior year quarter. The decrease was driven primarily by lower realized pricing and higher input costs as detailed above, partially offset by a $50,000,000 receivable recorded as other income, recognizing the approval of a second advance of insurance proceeds from the January 2024 collapse of the utility corridor. This amount exceeds previous expectations of 20,000,000 to $30,000,000 and the company expects to receive proceeds from the second advance payment prior to the end of this quarter.

[Rajat Marwah, CFO at Algoma Steel Group]

The company is working closely with the insurance advisors and carrier to finalize the remaining claims with the balance of payout expected by year end. Cash generated by operations totaled $92,000,000 for the quarter compared to $121,000,000 in the prior year period, reflecting the softer market conditions discussed earlier. As we previously outlined, we targeted a release of approximately $100,000,000 in working capital between March 24 and March 25, a goal we have now achieved. This was driven primarily by a significant reduction in inventory. For context, inventory levels declined by $138,000,000 compared to the prior year quarter and by $185,000,000 since 12/31/2024.

[Rajat Marwah, CFO at Algoma Steel Group]

We remain focused on further enhancing working capital efficiency as we transition to EF based steelmaking. Liquidity at quarter end totaled approximately $587,000,000 consisting of $226,000,000 in cash and $361,000,000 of availability under our existing credit facility. Based on our current liquidity position and expected cash generation, we believe we are well positioned to complete the EF project using existing resources. We have a strong funding plan and remain engaged in government programming that supports domestic steelmaking. I'd now like to turn the call back to our CEO, Michael Garcia, for closing comments.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Thank you, Rajat. In summary, despite persistently challenging market conditions and ongoing trade policy uncertainty, we have remained focused on the safe operation of our facilities, continued the steady ramp up of our production and advanced our transformative EAF project. We are optimistic that the newly elected Canadian government will work constructively with industries like ours to advance timely solutions that strengthen both our company, the community, and support the nation's broader economic goals. With trade relationships evolving, we believe it is critical that the government immediately engage with The United States to address the Section two thirty two tariffs currently in place and to support fair and balanced trade between both countries. Resolving these issues is essential to ensuring a level playing field for Canadian steel producers, supporting ongoing investment steelmaking and protecting jobs in Canada's manufacturing sector.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

We are ready to stand up for Canada and to help build Canada strong, with Canadian steel, Canadian workers, and a shared commitment to a more sustainable future. 2025 is shaping up to be one of the most exciting chapters in Algoma's history. With our modernization advancing, our transition to low carbon steelmaking underway, and our role as a critical supplier to Canada's manufacturing and infrastructure sectors expanding, we believe Algoma is well positioned to deliver sustainable, long term value for all of our stakeholders. I would like to once again thank all of our employees for their hard work, dedication, and professionalism. Thank you very much for your continued interest in Algoma Steel.

[Operator]

Thank you. We will now be conducting a question and answer session. Our first question is from Katya Jantzik with BMO Capital Markets. Please proceed.

[Katja Jancic, Analyst at BMO Capital Markets]

Hi, thank you for taking my questions. Maybe starting on the near term, looking to 2Q, how should we think about shipments given that the environment remains pretty challenging?

[Rajat Marwah, CFO at Algoma Steel Group]

Yeah, hi, Katya. This is Rajat. The way we see it is that we'll probably be higher on a quarter over quarter basis, so higher trajectory from where we were last time from shipments. The environment is challenging for sure, but we'll come down to you know, little less than our normal run rate as we move into the second quarter, but but quarter to quarter will be higher. And if if we'll side, sorry, just to go and on the plate side, we will be we will be higher as well as you've seen the ramp from last couple of quarter.

[Rajat Marwah, CFO at Algoma Steel Group]

We've gone down to gone up to 90, and we'll be we'll be going higher up on on the plate side.

[Katja Jancic, Analyst at BMO Capital Markets]

And if we look year over year for the total volume, is it getting close to that? I think last year, it was probably around 500,000 tons. Is that reasonable?

[Rajat Marwah, CFO at Algoma Steel Group]

Yes.

[Katja Jancic, Analyst at BMO Capital Markets]

And specifically, how much higher can the plate go in the near term versus the 91,000?

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Katya, this is Mike. So obviously we'll be approaching the 100,000 ton per quarter level. I expect that we'll be at or near that in the next quarter that we report. Our share of the Canadian steel market versus if you look at where we were when we really exited and completed the modernization, our share of the Canadian steel plate market has really almost doubled since that time. There's still some competition in the Canadian plate market.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Although we're the only domestic plate producer, we still face competition from foreign plate every day in the market in Canada, whether it's from Taiwan, Turkey, Italy, France, Korea, and even from The US with some contracts that they have. So we expect that there's still room to grow and the plating and more importantly, the Canadian plate market itself will grow. I think it's shrunk over the last few years, but with the renewed focus by the government on building Canada strong, that means a focus on infrastructure, especially energy infrastructure, defense, and maritime. All of those consume plate, and the government, I think, acknowledges and understands the strategic importance of a strong domestic steel industry, especially in plate. So I think this next quarter we'll see us moving towards 100,000 tons and then continuing to move towards our annual run rate of 650,000 tons.

[Katja Jancic, Analyst at BMO Capital Markets]

And maybe staying on the plate market, we saw plate prices in U. S. Increasing. How is pricing currently in the Canadian market?

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Canadian market is still it's still our most attractive pricing in the Canadian market. I think in general, the Canadian market is oversupplied in steel. Over 50% of the Canadian market is serviced by imported steel and a lot of that imported steel is coming in at pretty low pricing. We believe there's a significant amount of it that is unfairly traded into Canada. We're having active discussions with the Canadian government around what's the right trade policy that they should be putting in place to protect the strength of the domestic Canadian steel industry because it is a vitally strategic part of the Canadian economy going forward.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

But your question was specifically about steel pricing. It's still, the most attractive segment for us.

[Katja Jancic, Analyst at BMO Capital Markets]

Thank you.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Although it is lower than The U. S. Steel pricing.

[Operator]

Our next question is from David Ocampo with Cormark Securities. Please proceed.

[David Ocampo, Equity Research Analyst at Cormark Securities]

Thanks for taking my questions. Mike, I was hoping you could provide a little bit more commentary on the sheet pricing discount. I think on the last conference call, you guys noted a discount as high as 25%. Is that still the case? And have you been able to find incremental pockets of demand to be able to shift more of your mix from The US to Canada?

[David Ocampo, Equity Research Analyst at Cormark Securities]

Because it has been as high as 60%.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Yeah, David. Thanks for the question. In sheet and coil, it's difficult. Canadian market price has pretty much adjusted almost equal to a 25% discount to The US coil price. So for us particularly, makes us a little indifferent to whether we service a sheet order in The US and pay a 25% discount or take it in Canada at a 25% lower market price.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

That's one of the challenges we're facing with the current Canadian steel market. It's oversupplied with coil and with the uncertainty around where the tariffs and where demand is going to go, there's not much increased demand right now to support higher pricing. Then I spoke about the presence of all the foreign steel in Canada, over 50% of the market. So I think all those factors are leading to the situation where the Canadian market pricing is significantly lower than The U. S.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Market pricing and it's settling out about that 25% lower level.

[David Ocampo, Equity Research Analyst at Cormark Securities]

Okay. That makes sense. And then if I just look at the futures market just as an indication of what's to come, I mean, it's getting close to $800 a ton. And with a 25% discount and then compare that to, I think, your breakeven structure on sheet at $6.50, it does suggest that there's more negative EBITDA prints to come. Is that the right way to frame kind of Q2, Q3?

[Rajat Marwah, CFO at Algoma Steel Group]

Yeah, I think you're looking at the futures and just discounting it and looking at the math, you'll come to those conclusions, but you start adding plate to it, it does make a difference as we are selling more and more plate and moving more to value added products. Do sell cold rolled and others where we fetch higher margins. Sheet base, that's how the trajectory shows, but overall it is different and to that we've also been working on our cost side. We know that there will not be big change from raw material perspective as they are normally linked to either fixed price on the coal side and indices on the iron ore side, but there are other costs that we are looking at optimizing and reducing to reduce our cost as we go through this year. So, just math makes sense what you're saying, but there are a lot of other moving parts and other value added products that do make a difference.

[David Ocampo, Equity Research Analyst at Cormark Securities]

Okay. And then just a last one for me on the tariff costs, dollars 10,000,000 in the quarter, but that was a partial tariff. So when I look at 2018, I think you guys got to close to $250,000,000 for the year, so call it $60 odd million for the quarter. Is that a good proxy for the hit that you guys may see in Q2?

[Rajat Marwah, CFO at Algoma Steel Group]

Yeah, it's close. Yeah, that's how it should play out.

[David Ocampo, Equity Research Analyst at Cormark Securities]

Okay. That's it for me. I'll hop back in the queue.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Thanks, David.

[Operator]

Our next question is from Ian Gillies with Stifel. Please proceed.

[Ian Gillies, Managing Director at Stifel Financial Corp]

Good morning, everyone.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Good morning, Ian.

[Ian Gillies, Managing Director at Stifel Financial Corp]

Mike,

[Ian Gillies, Managing Director at Stifel Financial Corp]

could you maybe just talk a little bit about what's transpired with the between last update and this one? I acknowledge the delay is not long, but I guess it's only been six weeks since we last spoke and I'm just curious and maybe talk a little bit about what the critical path issues are over the next, I guess, over the short term here to get your first hot metal out of the EAF?

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Sure. So as you know, we've been constructing and installing the new EAF complex really since April of twenty twenty two is when we really started. We had the earthworks prepared and we really started construction in earnest. So it's been a three year journey. And as you start to approach the end of that journey and anticipate fully energizing the furnace and producing metal in the furnace, you create a very detailed Gantt chart and timeline for all of the final critical steps that need to happen to put us in a position to kind of strike that first arc and melt that first heat of steel.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

So as we started gaining visibility to this final timeline and final you know, Gantt chart for the second half of last year, that was placing the first arc in the first quarter of twenty twenty five. And, you know, that's what we communicated. The last time we spoke six weeks ago, we now had visibility that that was going to happen in the second quarter. We were thinking April, that's what we talked about, So the change today is it's still happening in the second quarter. The factors the team has run into has primarily been weather related as we dealt with higher than expected snow events beginning in November, but really also in March, we had higher than expected snow events.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

We had colder than expected seasonal temperatures, which affected our ability to commission some of the critical systems, especially the water treatment plant. You can't really commission a water treatment plant when you have sustained temperatures below zero, complex piping and piping installation and hydraulics check out. So really, it's this last intense work where we're executing the plan every day as aggressively as possible, but there's always things that could cause you to slip a day or a week at a time. So really what's happened is we slipped from the first quarter of twenty twenty five into the second quarter.

[Ian Gillies, Managing Director at Stifel Financial Corp]

Understood. That's helpful. And just a quick follow on for that one. When do you think you'll fire up the second furnace?

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Second furnace will be at the end of the year. We're focusing on the first furnace right now. A lot of the major work for the second furnace has already been in place. I imagine the team's going to learn a lot about the final sequence of startup events and what needs to happen in order to strike that first arc. We'll certainly apply all of that learning to the second furnace.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

But right now, the second furnace is showing the end of twenty twenty five.

[Ian Gillies, Managing Director at Stifel Financial Corp]

Understood. Maybe switching gears, two separate questions in and around liquidity. I guess the first one, with respect to the working capital facility, in the event that EBITDA is negative, are you still able to draw on that facility? Or are

[Ian Gillies, Managing Director at Stifel Financial Corp]

there

[Ian Gillies, Managing Director at Stifel Financial Corp]

covenants that wouldn't allow you to draw on that in the event you're generating negative EBITDA?

[Rajat Marwah, CFO at Algoma Steel Group]

So we can still draw on that. There's a covenant that you have to test to draw the last 10%, but you can still draw on that.

[Ian Gillies, Managing Director at Stifel Financial Corp]

And then, I guess the follow on question, fully acknowledging liquidity looks okay today. Like, are you debating taking on any incremental debt or looking at any of these Canadian government loan programs at the time being, or are those just going to be left out there as call options in the event they're required?

[Rajat Marwah, CFO at Algoma Steel Group]

So as of now, no. We are reviewing all scenarios and we know that any scenario that we look at right now will be different in just a few weeks. So though we are reviewing all scenarios, we have enough liquidity right now. We are working closely with the government on the work related to trade policies in Canada, and we would want the government to be active on discussing with the US government on the trade front as well. And at the same time, we are looking at optimizing our working capital as much as we can so that we have we can optimize it and we can use that cash if needed.

[Rajat Marwah, CFO at Algoma Steel Group]

But as of now, we don't see a need as we go through and the government programs are there and we are looking at all that has come out up till now and there will be more clarity as the government is in play and definitely we'll be looking at all the government programs that are out there to manage the tariffs.

[Ian Gillies, Managing Director at Stifel Financial Corp]

Okay. And Rajat, with respect to working capital, it was obviously a very strong quarter for inventory releases. Can you maybe just update us on how much how big of a source of funds you think working capital will be this year now that you're through Q1 and whether that's changed?

[Rajat Marwah, CFO at Algoma Steel Group]

So we will see from an inventory perspective, and when you look at working capital, are so many moving parts, primarily on the receivable side based on how pricing is and how much you're realizing, but we do see a reduction during the year. Now December, we'll make we'll be using some amount of some amount of inventories as we build inventories, but March to March, we will not see any big increase. It'll only be a reduction, and we'd only build a little as we go through the year on the inventory side, specifically the raw materials by December. So, there will be definitely some release, you know, the $50,000,000 that is booked as a receivable in the quarter will be released, and we've collected most of the money on the insurance side by now, and we'll get the rest during this quarter, so that will be a permanent release as you're seeing on the receivable side. So, there'll be puts and takes, but we'll see some release.

[Ian Gillies, Managing Director at Stifel Financial Corp]

Okay. Thanks very much.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Thanks, Ian.

[Operator]

Our next question is from James McGarrigle with RBC Capital Markets. Please proceed.

[James McGarragle, Vice President at RBC Capital Markets]

Hey, I just had a question on how we should be thinking about cost of goods sold into Q2. I know you flagged some cost control initiatives you're working through. Some of the input costs are contracted, but with the EAF ramping up, can you just give us some color on how we should be modeling things directionally into Q2 versus what we saw in Q1?

[Rajat Marwah, CFO at Algoma Steel Group]

Yes. So in Q1, the cost was higher because of one is volume, the other is the cost of utilities as the winter was quite harsh and we were not expecting that much higher cost. That cost will come down, we should be around overall cost of production, we should be around $10.20, 10 30, let's say $10.20 to $10.40 range in Canadian dollars overall blended cost as we come out and we keep on optimizing that during this year.

[James McGarragle, Vice President at RBC Capital Markets]

Thanks. And just another one on some of the recent developments on auto tariffs. The US announced they're going to provide car makers with credits for up to 15% of the value of vehicles that are assembled in The U. S. That can then be applied against the value of imported parts.

[James McGarragle, Vice President at RBC Capital Markets]

I know steel wasn't specifically talked about in that announcement, but does that announcement impact your ability to pass on pricing into The U. S. At all or does that impact demand for your sales into The U. S. At all?

[James McGarragle, Vice President at RBC Capital Markets]

Just trying to see if there's any impact from that announcement.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

Hi, James. This is Mike. First of all, welcome to the call and thank you for picking up coverage on Algoma Steel. I think the biggest impact of the recent announcements yesterday around the auto industry is just it gives more certainty to the entire automotive supply chain around what the exact impact of the current tariff regime will be. And I think any time you have more certainty, it leads to better predictability by the whole supply chain.

[Michael Garcia, Chief Executive Officer at Algoma Steel Group]

So it kind of helps us from understanding what the volume levels will be and probably stronger volume levels because those will always dip when there is uncertainty. But on the pricing side, it really won't. We don't see it giving us the opportunity to benefit from pricing, but certainly the lower level of uncertainty helps that segment for us.

[James McGarragle, Vice President at RBC Capital Markets]

Okay. Thank you very much. And I'll turn the line over.

[Operator]

With no further questions at this time, I would like to turn the floor back over to Mike Maraca for closing remarks.

[Michael Moraca, Vice President - Corporate Development & Treasurer at Algoma Steel Group]

Thanks again for your participation in our first quarter twenty twenty five earnings conference call and your continued interest in Algoma Steel. We look forward to updating you on our results and progress when we report our second quarter results this summer. Have a great day.

[Operator]

Thank you. This will conclude today's conference. We thank you for your participation. You may now disconnect your lines.

Participants

Executives

• Michael Moraca, Vice President - Corporate Development & Treasurer
• Michael Garcia, Chief Executive Officer
• Rajat Marwah, CFO

Analysts

• Katja Jancic, Analyst at BMO Capital Markets
• David Ocampo, Equity Research Analyst at Cormark Securities
• Ian Gillies, Managing Director at Stifel Financial Corp
• James McGarragle, Vice President at RBC Capital Markets