Velo3D Q3 2025 Earnings Report

Velo3D EPS Results

• Actual EPS: -$0.69
• Consensus EPS: N/A
• Beat/Miss: N/A
• One Year Ago EPS: N/A

Velo3D Revenue Results

• Actual Revenue: $13.64 million
• Expected Revenue: N/A
• Beat/Miss: N/A
• YoY Revenue Growth: N/A

Velo3D Announcement Details

• Quarter: Q3 2025
• Date: 11/10/2025
• Time: After Market Closes
• Conference Call Date: Monday, November 10, 2025
• Conference Call Time: 5:00PM ET

Velo3D (NASDAQ:VELO) is a technology company based in Fremont, California, that provides a fully integrated metal 3D printing solution for producing mission-critical components. Incorporated in June 2014 and publicly listed in September 2021, the company’s platform is used by organizations such as SpaceX, Honeywell, and Lam Research to support applications across defense, aerospace, transportation, and oil and gas. Velo3D positions its offering as an alternative to conventional 3D printing and traditional manufacturing by enabling complex part designs while maintaining standards for consistency, quality, and repeatability.

Velo3D Q3 2025 Earnings Call Transcript

Key Takeaways

• Positive Sentiment: Velo3D reported Q3 revenue of $13.6M (up 65% YoY) with backlog rising to $21M, and reaffirmed full-year 2025 guidance of $50–$60M revenue, target gross margin of 30%+ by Q4, and EBITDA profitability in H1 2026.
• Positive Sentiment: The company is shifting to a recurring-services platform (RPS) that management says is scaling rapidly — RPS is expected to represent roughly 20–30% of 2025 revenue and the backlog composition has materially shifted toward RPS orders.
• Positive Sentiment: Corporate and liquidity moves include an uplisting to Nasdaq and a $17.5M underwritten offering, raising cash to $11.8M to fund RPS scaling, R&D and capacity expansion.
• Negative Sentiment: Despite improvement, Q3 GAAP net loss was $11.8M and adjusted EBITDA remained negative $7.3M, and management warned that a U.S. government shutdown could delay bookings and timing for defense-related contracts.

Presentation

[Operator]

Welcome to the Velo3D third quarter 2025 financial results. At this time, all participants are in a listen-only mode. The question-and-answer session will follow the presentation. If anyone should require operator assistance during the conference, please press star zero on your telephone keypad. Please note this conference is being recorded. I will now turn the conference over to your host, James Carbonara, Investor Relations. Thank you. You may begin.

[James Carbonara, Investor Relations at Velo3D]

Thank you, Operator. Good afternoon, everyone, and welcome to Velo3D's third quarter 2025 earnings call. Before we begin, please note that today's call will contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements are subject to risks and uncertainties that could cause actual results to differ materially from those projected. Please refer to our press release issued earlier today, as well as our filings with the SEC, including our 2024 Form 10-K for a discussion of these risks. We will also reference certain non-GAAP financial measures during the call. Reconciliations between GAAP and non-GAAP results can be found in today's press release, which is available on the Investor Relations section of our website. A replay of this call will also be available shortly after its conclusion. With that, I will turn the call over to our CEO, Arun Jeldi.

[Arun Jeldi, CEO at Velo3D]

Thank you, James. Good afternoon, everyone, and thank you all for joining Velo3D's third quarter 2025 earnings conference call. This quarter represents another important milestone in Velo3D's transformation into a high-value recurring industrial technology platform, one that is deeply aligned with the future of advanced manufacturing, digital production, and national industrial resilience. Over the past year, we have been executing a disciplined and deliberate transformation strategy, shifting from a hardware-driven model to a scalable platform business built on recurring services, industrial partnerships, and mission-critical applications. Our third quarter results reflect that progress. We are delivering steady growth, operational improvement, and expanding margins, all while maintaining a clear line of sight toward profitability in the first half of 2026. In Q3, we delivered revenue of $13.6 million, consistent with last quarter, and up over 65% year-over-year from $8.2 million in 2024.

[Arun Jeldi, CEO at Velo3D]

This growth demonstrates the increasing market validation of our platform, the steady ramp of our rapid production services business, and the strength of our relationships with leading aerospace, defense, and industrial customers. Our backlog grew to $21 million as of September 30th, up from $16 million at the end of quarter two, reflecting strong repeat orders and long-term production contracts from customers who are embedding Velo3D into their mission-critical supply chains. Our RPS platform is at the heart of this transformation. It enables customers to achieve digitally certified high-complexity parts onshore at speed and with unmatched geometric freedom. For many customers, RPS is becoming their preferred pathway to production-grade additive manufacturing, delivering not only agility and precision but also a repeatable digital thread that enhances traceability and reliability across programs. This business is rapidly evolving into a recurring revenue for Velo3D, providing visibility, predictability, and sustainable margin expansion.

[Arun Jeldi, CEO at Velo3D]

The third quarter was rich with progress across our key markets and technology roadmap. We achieved several significant milestones that strengthen our position as the technology partner of choice for high-performance manufacturing. $6 million in sales and service agreements were signed under U.S. Navy's Maritime Industrial Base Program, where we developed and qualified copper-nickel alloys for use in our Sapphire systems. This work supports shipbuilding modernization and repair initiatives, key to strengthening U.S. maritime readiness. We joined the U.S. Army DevCom AvMC Manufacturing and Sustainment Initiative, advancing cost-effective additive manufacturing for aluminum CP1. This broadens our materials portfolio and expands our presence in defense-grade lightweight metals, a critical capability for next-generation platforms. Our partnership with Linde AMT is enabling the domestic sourcing of copper-nickel 70/30 powder, directly addressing one of the most urgent challenges facing U.S. defense and industrial supply chains, which are materials security and traceability.

[Arun Jeldi, CEO at Velo3D]

We achieved AS 9100D certification for our RPS quality management system, a major milestone that validates the maturity of our operations and our readiness to scale production within the aerospace and defense sectors. We announced the integration of Dyndrite LPBF Pro software across our Sapphire and Sapphire XC platforms, unlocking AI-enabled toolpath optimization and rapid process development capabilities that shorten customer time to qualification. Finally, we expanded our partnership with Innovative Rocket Technologies, scaling U.S.-based production for reusable launch vehicle and defense propulsion systems, further anchoring Velo3D in the emerging space and hypersonic manufacturing ecosystem. Collectively, these milestones underscore our technological differentiation, our alignment with strategic U.S. Industrial Programs, and our ability to compete in the highest-value segments of advanced manufacturing. Beyond operations, Q3 marked a defining corporate milestone for Velo3D.

[Arun Jeldi, CEO at Velo3D]

We successfully uplisted our common stock to the Nasdaq Capital Market, a step that not only enhances our visibility and credibility with the broader investment community but also affirms our progress in governance, transparency, and institutional readiness. The uplisting positions Velo3D alongside leading technology innovators and opens across to a broader pool of global investors who share our vision for the future of intelligent digital manufacturing. In conjunction with the uplisting, we completed a $17.5 million underwritten public offering for our common stock. The strong participation in the offering reflects growing investor confidence in our transformation strategy, the scalability of the business model, and our trajectory towards profitability.

[Arun Jeldi, CEO at Velo3D]

The proceeds from the offering have significantly strengthened our balance sheet, enhancing liquidity, improving working capital flexibility, and providing the fuel to accelerate our RPS scaling, advance R&D programs in new materials and software, and invest in automation and capacity expansion at our production facilities. This financial strength enables us to execute from a position of confidence, investing where it matters, scaling where we see opportunity, and maintaining clear focus on EBITDA profitability in the first half of 2026. Our performance in the first nine months of 2025 demonstrates the momentum building across our business. We have a strong order book, expanding customer base, improving margins, and tighter cost discipline. Based on this progress and our current visibility into Q4, we are reaffirming our full-year 2025 guidance. Our revenue will be within $50-$60 million and sequential gross margin improvement reaching 30% or higher by quarter four of 2025.

[Arun Jeldi, CEO at Velo3D]

The non-GAAP operating expenses will be anywhere between $40-$50 million. Capital expenditure will be $15-$20 million. EBITDA positive in the first half of 2026. These targets reflect our continued confidence in the strength of our execution, the resilience of our business model, and the depth of demand across our end markets. We believe that Velo3D is now positioning at a unique intersection where digital manufacturing, material innovation, and national reindustrialization coverage. Our technology is not only enabling customers to build the impossible, but to do so at production scale with quality and repeatability that meet the highest industry standards. We are confident that the steps we are taking today to expand RPS, deepen defense partnerships, and invest in material and software innovation will yield a strong, profitable growth platform for years to come.

[Arun Jeldi, CEO at Velo3D]

With that, I will turn the call over to our CFO, Hull Xu, for a deeper look at our financial performance.

[Hull Xu, CFO at Velo3D]

Thank you, Arun. Third quarter revenue was $13.6 million, up 65% compared to $8.2 million in the year-to-quarter. This increase was driven primarily by higher systems and printed parts sales as RPS operations continue to ramp up. Gross margin for the third quarter was 3.2% compared to 49.4% in the year-to-quarter and a negative 11.7% in the prior quarter. If you recall, the year-to-quarter had a one-time license revenue that significantly lifted gross margin. Sequentially, gross margin improved due to higher absorption of overhead as RPS volume increased along with more efficient system sales turnover. We expect margins to continue to improve as RPS scales and new Sapphire systems are built to order. Operating expenses were $11.1 million, down from $22.9 million a year ago. On a non-GAAP basis, excluding $2 million of stock-based compensation, operating expenses were $9 million, demonstrating continued cost discipline.

[Hull Xu, CFO at Velo3D]

GAAP net loss for the quarter was $11.8 million compared to a net loss of $23.1 million in the year-to-quarter. Non-GAAP net loss for the quarter was $9.2 million compared to $14.5 million in the year-to-quarter, and non-GAAP net loss excludes stock-based compensation of $2.6 million. Adjusted EBITDA for the third quarter of 2025 improved to negative $7.3 million compared to negative $9.7 million in the third quarter of 2024. As of September 30th, 2025, we had a backlog of $21 million. This compares to $16 million of backlog at the end of 2024 and $15.9 million at the end of the previous quarter. Importantly, the composition of the backlog made a significant shift toward RPS, driven by strong demand from the system and the defense sector, from the space and defense sectors.

[Hull Xu, CFO at Velo3D]

In terms of our balance sheet, as at the end of the third quarter, we had a cash and cash equivalent of $11.8 million compared to $1.2 million at the end of 2024. We remain confident in our liquidity position and capital plan to reach EBITDA profitability by mid-2026. In conclusion, we remain focused on executing our business strategy with a clear path to profitability. With that, Operator, we can open the call to questions.

[Operator]

Thank you. Ladies and gentlemen, at this time, we will conduct our question-and-answer session. If you would like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate that your line is in the question queue. To remove yourself from the question queue, you can press the star key followed by the number two. Once again, to ask a question, press star one on your telephone keypad. We will pause for a moment while we pull for questions. Your first question comes from Jaeson Schmidt with Lake Street Capital Markets. Please state your question.

[Jaeson Schmidt, Director of Research at Lake Street Capital Markets]

Thanks for taking the questions and congrats on the progress. Just curious if you could comment on if the government fund backdrop is causing any kind of return correction here. I might have missed it, but did you guys provide what bookings were in Q3?

[Arun Jeldi, CEO at Velo3D]

Sorry, Jaeson, I think it comes up a bit choppy, but if we're understanding correctly, you're asking about the government shutdown, whether there's any impact to our bookings?

[Jaeson Schmidt, Director of Research at Lake Street Capital Markets]

Yeah. Yeah, if the government funding backdrop is causing any sort of correction in sort of the returns here, as well as what bookings were in Q3.

[Hull Xu, CFO at Velo3D]

Jaeson, I can answer that government shutdown and the impact on the booking side for, I mean, the government shutdown started on October 4th. We were a little—we're not that worried because of the momentum, and some of the programs what we are leading actually has already been approved. The government shutdown might have a little impact of it, but the good thing is that they're moving in the right direction. Hopefully, they'll ramp up some of those backlog in the last 30 days or so to move fast on some of the programs. It seems like the bookings might impact a little bit, but we're pretty positive on getting what we are guiding.

[Arun Jeldi, CEO at Velo3D]

Yeah. Obviously, it depends on when it opens back up, right? So we are pretty close in signing a couple of things with the Primes. I think the timing would be probably the only thing.

[Jaeson Schmidt, Director of Research at Lake Street Capital Markets]

Okay. That makes sense. Obviously, you guys are seeing some really nice traction in RPS. What percentage of revenue could it be exiting this year?

[Hull Xu, CFO at Velo3D]

We're at—

[Arun Jeldi, CEO at Velo3D]

Go ahead.

[Hull Xu, CFO at Velo3D]

Go ahead.

[Arun Jeldi, CEO at Velo3D]

Oh, yeah. Okay. So, yeah, it continues to run.

[Hull Xu, CFO at Velo3D]

Compared to third quarter, second quarter, and first quarter, third quarter was greater than second quarter. Second quarter was greater than first quarter. We expect RPS to land somewhere between 20-30% for the year.

[Jaeson Schmidt, Director of Research at Lake Street Capital Markets]

Gotcha. The last one for me, and I'll jump back into queue. You're obviously seeing some nice traction in defense and space. Just curious, what are some other notable verticals you're seeing momentum in?

[Hull Xu, CFO at Velo3D]

Yeah. So we're seeing a lot of traction. I mean, you can see in the future bookings so far, like space is picking up pretty fast because we reduced the barrier for entry for RPS programs. Space and semiconductor markets are really, really getting their qualified parts in Q4. That is a big turn along with defense contracts. Energy is another sector. If you see, we're doing a major impact in the energy sector, especially oil and gas. We're pretty much focused on what our core sectors are: defense, space, semiconductor, and energy.

[Jaeson Schmidt, Director of Research at Lake Street Capital Markets]

All right. Thanks, guys.

[Hull Xu, CFO at Velo3D]

Thank you.

[Arun Jeldi, CEO at Velo3D]

Thanks, Jaeson.

[Operator]

A reminder to the audience to ask a question, press star one on your phone. To remove your question, press star two. Your next question comes from George Marema with Pareto Ventures. Please state your question.

[George Marema, Analyst at Pareto Ventures]

Yeah. Good afternoon, Hull and Arun. Thanks for taking the question. I have two questions for you. The first one is on the Q4 gross margin uptick. Is that more about mix of RPS versus systems, or more about efficiency of production of systems that's shifting?

[Hull Xu, CFO at Velo3D]

It's also—I mean, the company actually increased its production on the new machines, so the overhead. Overall operational efficiency, one part. The second part is the RPS gross margins is pretty high. As we mentioned before, the Q2, Q3, it's a snowball effect. We are raking up and increasing the RPS percentage of revenue, and that actually helps quite a bit. We are very careful on our gross margins on the new machines what we sell. That's where our confidence level is. That's why we are still guiding at 30%.

[George Marema, Analyst at Pareto Ventures]

In Q4, will you have kind of gone through most of the old legacy backlog from like a year ago?

[Hull Xu, CFO at Velo3D]

Yes.

[George Marema, Analyst at Pareto Ventures]

Okay.

[Hull Xu, CFO at Velo3D]

Yes. Yeah. If you see our inventory levels and others in the past and what you see, that has almost gone. We are building the new machines, so the overhead and everything will be reduced.

[George Marema, Analyst at Pareto Ventures]

Okay. Great. My second question, I was wondering if you could provide some more color on the DoD segment, excluding the shutdown period, of course. What kind of demand signals are you seeing in terms of—is there a higher uptick in velocity of RPS? Are there any concrete examples you can provide of just what is the velocity of the DoD segment for 3D printing parts?

[Hull Xu, CFO at Velo3D]

I'll give a few examples, and you can relate to those. One of the things is the munitions program. That's upticking quite a bit with a lot of promises in the recent press release. DoD is basically ramping up their manufacturing in the U.S., and they want to increase their stockpile. That's another reason, if you recently heard that the defense secretary has conducted these acquisitions and is cutting the red tape to increase the production. That's where all that demand is coming from. We are in the right place in the right business. In one sense, it's like the manufacturing is the key here to actually increase the production. All these defense companies now are leaving the traditional legacy way of doing things and saw more value.

[Hull Xu, CFO at Velo3D]

Like one of the programs we are involved has showed them that it can be cheaper and faster than traditional, and that is ticking up pretty fast. They are moving some legacy parts, some Munitions Programs, and shipbuilding. You see a lot of army programs and CP1 and other things. That is where the demand comes from.

[George Marema, Analyst at Pareto Ventures]

Okay. That's excellent. Thank you for the examples. Appreciate it.

[Hull Xu, CFO at Velo3D]

Yeah. Thank you.

[Operator]

Ladies and gentlemen, it appears that there are no further questions at this time. So I'll hand the floor back to management for any closing remarks. Thank you.

[Arun Jeldi, CEO at Velo3D]

Thank you, everyone. It's me, Arun Jeldi, CEO of Velo3D. Before we close, I want to recognize our employees, customers, and investors for their continued confidence and partnership. The transformation underway at Velo3D is real, and the results are visible across every dimension of our business. We are executing with focus, innovation with purpose, and positioning Velo3D for long-term value creation, both for our shareholders and for the industries we serve. Thank you again for joining us today and for your continued support.

[Operator]

Thank you. That concludes today's conference. All parties may disconnect. Have a good day.

Participants

Executives

• James Carbonara, Investor Relations
• Hull Xu, CFO
• Arun Jeldi, CEO

Analysts

• George Marema, Analyst at Pareto Ventures
• Jaeson Schmidt, Director of Research at Lake Street Capital Markets