3D Systems Q3 2024 Earnings Report

3D Systems EPS Results

• Actual EPS: -$0.16
• Consensus EPS: -$0.14
• Beat/Miss: Missed by -$0.02
• One Year Ago EPS: N/A

3D Systems Revenue Results

• Actual Revenue: $112.94 million
• Expected Revenue: N/A
• Beat/Miss: N/A
• YoY Revenue Growth: N/A

3D Systems Announcement Details

• Quarter: Q3 2024
• Date: 11/26/2024
• Time: After Market Closes
• Conference Call Date: Wednesday, November 27, 2024
• Conference Call Time: 8:30AM ET

3D Systems (NYSE:DDD) (NYSE:DDD) develops and provides additive manufacturing, commonly known as 3D printing, technologies for industrial and healthcare applications. The company offers 3D printers, printing materials, software, design and production services, and related support to help customers move from product development and prototyping to production.

Its solutions serve industries including aerospace and defense, automotive, healthcare, dental, consumer products, and general manufacturing. In healthcare, 3D Systems provides technologies and services used in dental applications, surgical planning, medical modeling, and the development of patient-specific devices. Its industrial offerings support applications such as prototyping, tooling, and the production of customized or complex components.

Founded in 1986 by Chuck Hull, who is widely recognized as the inventor of stereolithography, 3D Systems has played a foundational role in the development of commercial 3D printing. The company serves customers internationally through its technology portfolio, sales and service operations, and production facilities. Its corporate headquarters are in Rock Hill, South Carolina.

3D Systems Q3 2024 Earnings Call Transcript

Key Takeaways

• Q3 revenue was essentially flat sequentially and down 9% year-over-year to $112.9 million as customers pulled back on capital expenditures amid macro and geopolitical uncertainty.
• Consumables sales grew ~10% year-over-year and 9% sequentially, indicating rising utilization of the installed printer base and healthier recurring material revenue.
• Industrial application development revenue was up 26% year-over-year, driven by strong customer interest in high-reliability markets and AI-related applications like advanced copper cooling components for semiconductors and data centers.
• Healthcare segment revenue increased 5% year-over-year, led by a >30% rebound in dental and ~20% growth in personalized healthcare, including new FDA clearances for total ankle surgical guides and multi-material jetted dentures.
• Non-GAAP gross margin was 37.6%—impacted by a $3 million inventory reserve build and lower factory absorption—while operating expenses fell $2.7 million sequentially; Q4 OpEx is targeted below $60 million and full-year revenue guidance is $440–450 million with 38–40% gross margins.

Presentation

[Operator]

Greetings and welcome to the 3D Systems third quarter 2024 earnings conference call and webcast. At this time, all participants are in listen-only mode. If anyone should require operator assistance, please press star zero on your telephone keypad. A question and answer session will follow the formal presentation. You may be placed into question queue at any time by pressing star one on your telephone keypad. As a reminder, this conference is being recorded. It's now my pleasure to turn the call over to Mick McCloskey, Vice President, Investor Relations. Please go ahead, Mick.

[Mick McCloskey, VP of Investor Relations at 3D Systems]

Hello and welcome to 3D Systems third quarter 2024 conference call. With me on today's call are Dr. Jeffrey Graves, President and CEO, and Jeff Creech, EVP and CFO. The webcast portion of this call contains a slide presentation that we will refer to during the call. Those following along on the phone who wish to access the slide portion of this presentation may do so on the Investor Relations section of our website. The following discussion and responses to your questions reflect management's views as of today only and will include forward-looking statements as described on this slide. Actual results may differ materially. Additional information about factors that could potentially impact our financial results is included in our latest press release and our recent filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q.

[Mick McCloskey, VP of Investor Relations at 3D Systems]

During this call, we will discuss certain non-GAAP measures. In our press release and slides accompanying this webcast, you will find additional disclosures regarding these non-GAAP measures, including reconciliations with comparable GAAP measures. Finally, unless otherwise stated, all comparisons in this call will be against our results for the comparable period of 2023. With that, I'll turn the call over to our CEO, Jeff Graves, for opening remarks.

[Jeffrey Graves, President and CEO at 3D Systems]

Thank you, Mick, and good morning, everyone. Today, I'll begin with an overview of our third quarter results and then touch on some recent key accomplishments and announcements. I'll then ask our CFO, Jeff Creech, to take us through the Q3 in greater detail before closing the call with comments on our outlook, after which we're happy to take questions. So let's start on slide five. At a high level, our third quarter revenue largely represents a continuation of the trends that we and the additive industry broadly have been contending with for several quarters now. Very simply, macroeconomic and geopolitical uncertainties have caused our customers to reduce CapEx spending for new capacity in their factories, which in turn has created a persistent headwind to hardware system sales. It's really that simple. As a consequence, our revenues were essentially flat on a sequential basis.

[Jeffrey Graves, President and CEO at 3D Systems]

This was slightly weaker than we had anticipated, as a few key installations of new systems, which were targeted for acceptance late in Q3, slipped into the fourth quarter. However, while the sale of new printing systems is still sluggish, what is changing for the better is the utilization rate of our installed base, as indicated by rising sales of consumables to our customers. Consumable materials grew approximately 10% from the prior year and demonstrated sustained sequential growth, a trajectory that has consistently improved since the beginning of the year, most recently growing 9% sequentially in the third quarter versus Q2. In a similar vein, interest in new application development has been on a very robust trajectory. As many of you know, we have one of the largest and most capable application engineering groups in the world.

[Jeffrey Graves, President and CEO at 3D Systems]

These engineers work directly with our customers on new applications for both metal and polymer 3D printing. Year-to-date, revenues from our industrial application group are up 26% from last year and continue to rise. We monitor this activity level as a directional indicator of growth potential for important new applications. The performance we experienced in Q3 is a strong indicator of continuing growth in customer interest in 3D printing for their production needs. We expect this interest to ultimately translate into more robust sales as the economic environment improves. To provide a little more color on where this interest is coming from, leading the way are what we refer to as the high-reliability markets, such as energy, oil and gas, semiconductor equipment manufacturing, and aerospace and defense, all of which have a very high standard for component quality, performance, reliability, and traceability.

[Jeffrey Graves, President and CEO at 3D Systems]

For these customers, which are often subject to strict regulatory requirements, the ability of both our polymer and metal printing solutions to meet their needs and to do so with compelling economics is a cornerstone of our value proposition. As an example of markets that I'm particularly excited about these days are those driven by the trillion-dollar investments being made in AI. These investments cascade directly into several of our targeted end markets, ranging from semiconductor equipment manufacturing to data centers to the power generation equipment needed to provide electricity critical to their operation. As just one example, the management of heat is absolutely essential to both the manufacture of silicon chips as well as their performance and life in a data center environment.

[Jeffrey Graves, President and CEO at 3D Systems]

The nanoscale of advanced microprocessors, combined with the extraordinary number used in a modern data center, creates an extremely challenging environment to keep the processors cool in operation. One way to effectively do so is through the use of high-purity copper elements that can be placed in or very near the heart of a GPU. Combining the inherent capability of 3D printing to manufacture complex, high-surface-area components with our unique capability to print ultra-high-purity copper with our advanced metal printing systems gives GPU and data center architects a powerful means of removing heat effectively from the system. Given that the power consumed by data centers now exceeds that of many small countries, this cooling capability is increasingly valuable.

[Jeffrey Graves, President and CEO at 3D Systems]

This is just one example of our increasing focus on the full semiconductor ecosystem that we believe will provide one avenue for meaningful growth for our company in the future. Another market we continue to be excited about is high-performance automotive, an example of which is F1 racing. As an example, you may have seen our announcement earlier this month with Sauber Motorsport. In this case, we updated the entire Sauber production facility as they added 10 of our newest production printer systems to their manufacturing workflow. This included eight of our market-leading SLA 750 dual laser printers and two of our just-released PSLA 270 platform, all enabled by a host of industry-leading high-performance materials. Sauber will use these systems in large part to validate their aerodynamic designs through rapid fabrication of production components for wind tunnel testing.

[Jeffrey Graves, President and CEO at 3D Systems]

This award builds on a nearly 20-year relationship between our companies, reflecting the trust they have in our technological leadership and outstanding service capabilities, both of which are essential to their success in this challenging industry. This important win adds a strong new element to our automotive foundation, a market which is expected to grow to almost $8 billion in the next few years. Since I mentioned it, let me take a moment to focus on our newest photopolymer printing platform, the PSLA 270. This is the first of what will be a family of new projector-over-vat printing systems, combining the superior surface quality associated with our flagship SLA printing platform with the blazing speeds offered by the latest high-resolution projector technology. This technology is an outgrowth of our work in regenerative medicine, which incorporates a very high-resolution projection system.

[Jeffrey Graves, President and CEO at 3D Systems]

By replacing a single-point laser with a full-field projection system, we attain high precision at much higher print speeds. In fact, the closest competitive solution today would have to run two machines simultaneously to achieve the same output as one PSLA 270. In addition, this system is designed to use our entire portfolio of advanced polymers originally developed for the Figure 4 system. By offering this exceptional platform as a part of a complete factory workflow, we believe our PSLA platforms will lead the industry forward in photopolymer applications. From a healthcare standpoint, the third quarter was strong, with solid growth on a sequential and year-over-year basis. We attribute this growth to a meaningful recovery in dental, up well over 30%, and another impressive performance in personalized healthcare, which was up almost 20%.

[Jeffrey Graves, President and CEO at 3D Systems]

Given the momentum we have in our healthcare business broadly and our strong pipeline of new products and applications ahead, we remain very excited about the future of this portion of our business. From a gross margin standpoint, the third quarter was softer than we had anticipated, predominantly driven by an increase in inventory reserves and continued lower factory utilization, both driven by softness in printer volumes. Jeff Creech will take you through the specifics in more detail shortly, but after normalizing for inventory reserves, our third quarter operating margins were roughly in line with recent performance. We continue to target a business model that can deliver mid-40% margins or greater over time once the benefits of our insourcing and restructuring initiatives are fully realized with increasing volume. Operating expenses for the quarter were consistent with our expectations.

[Jeffrey Graves, President and CEO at 3D Systems]

We're pleased that our restructuring actions have started to more positively influence performance, representing a nearly $3 million sequential improvement. And while our overall OpEx expenses are declining, we continue to invest extensively in our R&D activities, which is fueling a historic year of product innovation for our company. More on this in just a few moments. While we're encouraged by some of the leading indicators that we're now seeing, we also recognize that the revenue environment we're operating in today demands an even greater degree of operational efficiency to gain sustained profitability, which is our clear goal. As such, operating expenses remain a strong focus and a lever largely within our direct control in this environment. With that in mind, we maintain our goal of reducing operating expenses to below $6 million for the fourth quarter, with the majority of this improvement coming from reductions in G&A.

[Jeffrey Graves, President and CEO at 3D Systems]

Lastly, to our balance sheet, where we've been focused on optimizing working capital as we position ourselves for future growth, we entered 2024 with a goal to deliver inventory reductions as a healthy generator of cash throughout the year. Today, we remain on pace to reach our target of a 20% inventory reduction by year-end. Over the course of the third quarter, cash on our balance sheet declined $3 million from the prior quarter, a significant rate improvement from prior quarters. This leaves us with one of the strongest cash positions of any company in our industry. On slide six, I'd like to take a few moments to reflect on the historic year of progress across our technology roadmap.

[Jeffrey Graves, President and CEO at 3D Systems]

You've heard this from us many times before, but as the inventor of the technology that birthed the 3D printing industry, our dedication to innovation is a core element of our company culture. Maintaining momentum with mission-critical R&D, even through a challenging sales environment, is not only fundamentally different than most of our peers, but it's embedded deeply in our DNA. This is the primary reason customers turn to 3D Systems first in assessing the capability of 3D printing to meet their metal and polymer production needs. Reflecting this commitment, you've witnessed an unprecedented pace of innovation from our company over the last 12 months, contributing nearly 40 new materials, software enhancements, and metal and polymer printing platforms since Q3 of last year, 25 in this year alone. And the momentum will continue as we exit this year and move into 2025.

[Jeffrey Graves, President and CEO at 3D Systems]

This represents the culmination of three years of focus and investment, as we're refreshing our entire portfolio of printing platforms and the materials and software that enable their outstanding production performance. From a key application standpoint, during the third quarter, we announced QuickCast Air, which is targeted for the investment casting market. This casting method is essential to aircraft and rocket propulsion systems and other high-performance applications. It's expected to reach nearly $34 billion over the next 10 years. QuickCast Air reliably delivers a large, high-precision investment casting pattern in a fraction of the time and cost of traditional methods, providing up to a 50% reduction in resin usage in some cases while maintaining the inherent advantage of virtually unlimited geometric complexity of design. The result for our customers is higher-performing components at lower cost and in much shorter production cycle times for their most demanding applications.

[Jeffrey Graves, President and CEO at 3D Systems]

On the software front, we announced a significant milestone in commercializing our Oqton Industrial MOS platform with our strategic partner, Baker Hughes. Our software, which is now utilized in Baker's Houston, Texas manufacturing facility, is enabling on-demand additive manufacturing to provide full factory floor workflow integration, automation, control, and optimization. Its production implementation is providing key proof points, such as a 98% reduction in active monitoring engineering time, a savings of 136 engineering hours per printer annually, and an 18% reduction in costs associated with scrap due to real-time actionable alerts during component production. Turning to healthcare, our personalized healthcare business delivered another quarter of meaningful growth. During the quarter, we were very pleased to announce that we're once again expanding our orthopedic surgical planning portfolio, this time with FDA clearance for our new total ankle patient-matched guides to pair with Smith+Nephew's total ankle replacement solution.

[Jeffrey Graves, President and CEO at 3D Systems]

This expands our patient-specific surgical solution capabilities in a market anticipated to grow to over $5 billion in the next few years. Today, we're exceptionally well-positioned in the cranial, maxillofacial, and spinal markets, and new FDA-approved solutions such as this highlight our ability to expand our orthopedic applications much further in the human body. We're also leveraging our expertise in surgical solutions into adjacent markets, rolling out expanded capabilities to address the needs of trauma patients. In addition, we see opportunities to expand our personalized health service in Europe and elsewhere and are investing accordingly to ensure regulatory approvals are acquired. These growth elements reinforce our enthusiasm about our growth in this key area of our company. For our dental activities, a key growth engine for the future is the multi-billion dollar dentures market.

[Jeffrey Graves, President and CEO at 3D Systems]

In an important milestone, we secured FDA clearance in September for our first-to-market multimaterial single-piece jetted denture solution. Our unique denture offering provides an unparalleled combination of toughness to ensure long-term reliability with outstanding aesthetics for enhanced patient experience. As previously shared, we found an excellent launch partner in Glidewell, one of the world's largest producers of restorative dental devices, who's hit the ground running with implementing jetted dentures into its workflow following our clearance with the FDA. We're excited to see this product enter the market in the coming months. To wrap up my introduction, undoubtedly, 2024 has been a difficult sales environment, but with our strong balance sheet, we've delivered tremendous progress transforming our technology portfolio. Formnext, the largest AM conference of the year that was just held last week, gave us an opportunity to highlight this journey with the announcement of several new product introductions.

[Jeffrey Graves, President and CEO at 3D Systems]

In addition to our metal and PSLA polymer platforms, we highlighted our newest Titan extrusion platform, which is our inroad into the industrial extrusion printing market. The EXT family, as we call it, includes the 1270, the 1070, and our newest edition, the 800. It provides a novel approach to extrusion technology, offering a hybrid solution that can accommodate pellets, filaments, and traditional CNC machining all in one platform. Delivering speeds of five to 10 times faster and having raw material costs roughly 10 times lower than its closest competitor, we see increasing interest from our customers around the world for this family of products. Rounding things out, we've also announced a plethora of new materials supporting our SLA, MJP, and SLS platforms, further expanding the broadest portfolio of additive solutions in the industry and setting the stage for us to drive increased adoption in the years ahead.

[Jeffrey Graves, President and CEO at 3D Systems]

With that, I'll turn things over to our CFO, Jeff Creech, for more on the quarter. Jeff?

[Jeff Creech, EVP and CFO at 3D Systems]

Thank you, Jeff, and good morning, everyone. I'll begin with our revenue summary on slide eight. third quarter revenues of $112.9 million declined 9% from prior year, driven primarily by a continuation of macroeconomic pressures impacting hardware system sales, partially offset by growth in materials sales. On a sequential basis, revenues were roughly flat and impacted by a few large dollar orders that fell outside of our third quarter close. Within our segments, industrial revenues were $57.9 million and down about 19%, predominantly driven mostly by a decline in printer sales. In our healthcare segment, revenues were $55.1 million for the quarter and grew 5% from prior year. As Jeff just mentioned, growth in the third quarter was primarily driven by a healthy rebound in dental and our personalized healthcare business.

[Jeff Creech, EVP and CFO at 3D Systems]

Now let's turn to slide nine. Non-GAAP gross margin for the third quarter was 37.6% and included an increase in inventory obsolescence reserves taken in the quarter, representing approximately $3 million. Normalizing for the impact related to inventory reserves would result in a margin of 40.2% for the third quarter. Comparing to prior year, margin was 44.8%, which included a significant benefit of regenerative medicine milestone revenue recognition. Excluding the impacts of inventory reserve increases and the milestone recognition in the current and prior quarters, respectively, gross margins would have been 40.2% and 42.7%, with a year-on-year decline primarily driven by unfavorable absorption given lower sales volumes. Now let's move to slide 10 for operating expense. Non-GAAP operating expense for the third quarter was $61.4 million, increasing $5.6 million from prior year but declining $2.7 million consecutively, in line with our expectations.

[Jeff Creech, EVP and CFO at 3D Systems]

As an important reminder, the prior year quarter comparison benefited from a tailwind associated with lower incentive compensation expense, in addition to other benefits that were more one-time in nature. third quarter operating expense benefited from our previously discussed restructuring actions, and we continue to expect an additional sequential reduction targeting OpEx below $60 million for the fourth quarter. Now to slide 11 to finish up the P&L. We reported adjusted EBITDA of -$14.3 million for the third quarter, compared to a gain of $4.7 million for the same quarter last year. Declines in adjusted EBITDA primarily reflect lower sales volumes, margin, and higher operating expenses, as just discussed. The prior year profitability performance was also significantly impacted by the milestone revenue recognition from our RegMed business, as I just mentioned.

[Jeff Creech, EVP and CFO at 3D Systems]

In line with my commentary on expected OpEx savings in the fourth quarter, we would also expect an improvement in adjusted EBITDA sequentially as we continue to move towards our longer-term goal of consistent profitability. For the third quarter, we reported a fully diluted loss per share of $1.35, and this includes non-cash charges of approximately $144 million associated with the impairment of goodwill and other long-lived assets as a result of our interim valuation testing during the third quarter of this year. This compared to a loss per share of $0.09 in the third quarter prior year. Non-GAAP loss per share was $0.12 compared to a gain per share of $0.01 in the prior year. Now to slide 12 for the balance sheet.

[Jeff Creech, EVP and CFO at 3D Systems]

We closed the quarter with $190 million of cash and cash equivalents compared to $193 million at the end of the second quarter of this year. As expected, cash performance represented an improvement in working capital management, particularly as we look to continue driving down inventories as a result of our insourcing actions from prior years. As noted on previous calls, we've been highly proactive in repurchasing our debt and have reduced our 0% convertible notes down by over 50% since Q3 of last year, fortifying our position to continue supporting critical R&D investments for the new product releases, combined with a keen focus on reducing expenses to drive profitability. Looking forward, we continue to view inventory as a source of cash in the fourth quarter. I'll conclude my remarks on slide 13.

[Jeff Creech, EVP and CFO at 3D Systems]

As you heard from us this morning, we continue to make strides across our portfolio to emerge stronger from the current economic cycle when pick-up demand for additive solutions returns. We've been consistent in fueling our R&D engines through a tougher macro environment, driving an acceleration of applications and new product development to emerge stronger in the years ahead. However, we are adjusting our guidance expectations for the full year 2024 as follows. We expect full year revenues between the range of $440 million-$450 million, which implies a mid- to high single-digit % sequential recovery in the second half revenues from the first half of this year.

[Jeff Creech, EVP and CFO at 3D Systems]

While the fourth quarter has historically reflected a higher degree of year-end capital budget spending, given current uncertainty in the near term as well as indications of timing adjustments related to inventory management among a few customers, we expect the benefits to be more modest ending the year. Fourth quarter gross margins are expected to be in the range of 38%-40%, given the impact of short-term inventory reserve adjustments as we continue to integrate our insourcing capabilities that we believe longer-term will improve gross margins to the mid-40% range as volumes recover and we are able to reap the full benefits of our insourcing and restructuring actions. We are maintaining our expectations to deliver OpEx at or below $60 million for the fourth quarter, continuing its trend of sequential improvement and reflecting the benefits of our previous restructuring.

[Jeff Creech, EVP and CFO at 3D Systems]

As a result, adjusted EBITDA is expected to improve on a sequential basis, primarily driven by the reduction in operating expense. Jeff, I'll hand it back to you.

[Jeffrey Graves, President and CEO at 3D Systems]

Thanks, Jeff. So we believe that the broader macro trends negatively impacting our industry to the greatest extent are beginning now to move behind us. With our strong cash position, we've been able to maintain our core investments for the future while consistently restructuring our company to maximize operating efficiencies. Our determination to support key R&D investments are fundamentally different from many others in the industry, and we believe position us well for accelerated growth and profitability as our end markets inevitably strengthen.

[Jeffrey Graves, President and CEO at 3D Systems]

While we will not be providing explicit comments on 2025 yet, looking beyond this year, as much of our critical R&D work is behind us, we will continue to evaluate incremental actions that can strategically remove costs from our business and drive sustainable profitability. In doing so, I believe we'll deliver meaningful value to all of our stakeholders. So with that, we'll now open the line for questions. Kevin, if you'd open the line for us, please.

[Operator]

Certainly. We'll now be conducting a question and answer session. If you'd like to be placed in the question queue, please press star one on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star two if you'd like to remove your question from the queue. One moment, please while we poll for questions, our first question is coming from Jim Ricchiuti from Needham & Company. Your line is now live.

[Jim Ricchiuti, Senior Analyst at Needham & Company]

Hi. Good morning. So I'm looking at your implied revenue guidance for Q4. It's a little surprising with only a month left in the quarter that there's a relatively wide range of scenarios. I'm hoping you could help us understand what's driving that. I mean, it sounds like potentially some of your customers may be working through inventories, and maybe that's on the materials side. But maybe if you could help us understand that a little, and then I have a quick follow-up.

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah, Jim. I think there's two factors. One of it clearly is inventory management from our customers.

[Jeffrey Graves, President and CEO at 3D Systems]

They're in good shape, but they want to make sure they don't get out over their skis with all the changes coming in 2025 in the political environment and the geopolitical issues. I think nobody wants to be overly exposed on inventories. So I don't think it's a massive problem, but certainly they'll be managing them customer by customer. The big unknown, Jim, is really how much CapEx they'll be willing to spend in the fourth quarter and at what rate. Even if they cut loose CapEx late in the quarter, as we saw in Q3, some of those installations aren't then completed until the following quarter, which delays revenue recognition on many of them. So there can be a timing issue on their capital spend.

[Jeffrey Graves, President and CEO at 3D Systems]

In normal times, a lot of them would try to spend their capital up in the fourth quarter and get it done as early as possible for planning. Right now, what we're seeing is a bit of trepidation, a bit of slowness in issuing POs. I expect this quarter to certainly be up, but not quite, if I had to guess, Jim, not quite in line with historical norms. But there is some upside for us versus our midpoint. But given that Q3, there was some slippage at the end of the quarter, into the following quarter, I just don't want us to get out ahead of ourselves. So that's why you'd see a little bit of a wider range and a little bit more modesty, if you will, on the growth rate in Q4. So we believe it'll be up and up nicely for the quarter.

[Jeffrey Graves, President and CEO at 3D Systems]

But CapEx, inventory management are just unknowns, and we want to buffer for those.

[Jim Ricchiuti, Senior Analyst at Needham & Company]

Okay.

[Jeffrey Graves, President and CEO at 3D Systems]

Does that make sense?

[Jim Ricchiuti, Senior Analyst at Needham & Company]

It's helpful. And maybe we could just turn to gross margins because the guidance for the year, I guess, 38%-40%. Again, a little surprising given that your nine-month gross margin was 39.5%. Is this all a case of unfavorable absorption if the Q4 revenues come in at the low end of your implied guidance?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah, there's two factors, Jim. One of them is that. One of them is factory absorption. The other one really is mixed because, and I'm keeping my fingers crossed here, we should see an uptick in printer sales, and that's good for the long term from a materials utilization standpoint. I'm a little concerned that customers will be managing inventory on materials, and it's an unknown.

[Jeffrey Graves, President and CEO at 3D Systems]

So you could see a mixed effect, and you certainly will still see a factory utilization effect. So I'd say there's two factors in that, and both of them lead to a little modesty on the gross margin for the quarter. Nicely, the insourcing work we've done, I think, will pay real dividends for us from a printer manufacturing standpoint as volumes rise again, hopefully in 2025. But for right now, any uptick in printer sales in Q4 would be a drag on gross margins.

[Jim Ricchiuti, Senior Analyst at Needham & Company]

Got it. Thank you.

[Jeffrey Graves, President and CEO at 3D Systems]

Thanks, Jim. Have a good Thanksgiving.

[Operator]

Thank you. Next question is coming from Greg Palm from Craig-Hallum. Your line is now live.

[Jeffrey Graves, President and CEO at 3D Systems]

Morning, Greg.

[Danny Eggerichs, Equity Research Analyst at Craig-Hallum]

Yeah, thanks. Hey, guys. This is Danny Eggerichs on for Greg today. Thanks for taking the questions.

[Jeffrey Graves, President and CEO at 3D Systems]

Hey, Danny. Sure.

[Danny Eggerichs, Equity Research Analyst at Craig-Hallum]

I know you kind of said you're not going to touch on 2025 yet, but just thinking about maybe profitability. I know in the release, maybe some commentary was trajectory towards profitability in quarters ahead. Are we thinking about it as something that can be a 2025 event, or is it just kind of too early to tell how should we be thinking about breakeven and slip into profitability?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah, Danny, it's the art of prediction. So I'm very encouraged by the number of new applications customers are talking about. If they put real capital behind that, we could see a nice lift in revenues in 2025. It's a question of how quickly will they spend the money for it. Nicely, I have no doubt these applications are things they really want to put in their factories. That's a good thing. It's a timing issue.

[Jeffrey Graves, President and CEO at 3D Systems]

So we're hopeful revenues will be rising in 2025, which will be helpful. Factory utilizations then improve. The inventory reduction plan we have will be great for cash. So those are all positive factors. And I'll be candid with you. We have real opportunities for cost management, which I think will really help in 2025. So I can't give you a number, but I think you'll see significant movement in 2025. If those things come to pass, you'll see significant movement in 2025 toward profitability. And hopefully, at some point during the year, you'd see a swing to positive EBITDA and growth from there. So it's just too early to tell, and we won't put out guidance until we get to our fourth quarter results. But I'm encouraged by the trends, and we'll see if they continue.

[Danny Eggerichs, Equity Research Analyst at Craig-Hallum]

Yeah, that makes total sense. Maybe if we can just touch on that AIG, the Application Innovation Group, sounds like was really strong in the quarter. Just maybe trying to size up that opportunity, maybe where our contribution currently is, and when the cycle eventually turns, how should we be thinking about that opportunity moving forward?

[Jeffrey Graves, President and CEO at 3D Systems]

Danny, I would tell you the revenue we generate from AIG, so these are obviously their applications customers are paying for us to develop with them. So there is a revenue stream there. The important thing about that is the trend of the revenue stream. So if it's growing, it may not be a material, actually, it may not be a material number on the overall P&L, but if it's growing, then customers are demanding more and more of our time to develop new applications.

[Jeffrey Graves, President and CEO at 3D Systems]

And we're picking and choosing those very carefully to make sure they're the highest volume, highest value components that we can help them develop for their factories. So I would tell you the magnitude of revenue is not really important. It's the direction that it's headed. And that, I think we quoted a 26% rise, is fabulous. I mean, our guys are swamped. And we have 80+ applications. I believe it's the biggest in the industry. Certainly, I'm very proud of them. I think they're the best in the industry. And these new applications they're working on are tremendous.

[Jeffrey Graves, President and CEO at 3D Systems]

The amount of interest we have related to semiconductors broadly and data centers and things, all driven by, I believe, this overall AI investment in the use of AI, that I think is going to be a nice way for us and for anybody in this industry that's positioned for, primarily in the metal side of the business. I think the ability to print basically heat sinks, heat conduction capability is very, very positive. So you could see some large applications flowing through in the future for those. And that goes all the way down to semiconductor equipment manufacturing. We can consolidate the number of parts in a machine. These are extremely expensive machines, as you might know. We can consolidate a number of parts. We can make them higher-performing parts, all by 3D printing them. And so we've got all of the major semiconductor equipment manufacturers working with us.

[Jeffrey Graves, President and CEO at 3D Systems]

We have people that are using GPUs and data centers working with us. In fact, at Formnext, I wish I'd put this on a slide. You would have seen a copper heat sink that was incredibly interesting. It's out on the website, I believe, but it was designed using AI, quite frankly, and it can conduct heat away 3x more efficiently than any other high-purity copper heat sink in the world. And so we're tremendously excited about markets like that because they're very valuable high-payoff components, which will help the whole supply chain. So I quoted the AIG's rise not because it's material impactful on the P&L, but because the trend is really positive in terms of customer interest in 3D printing. So can't really help you from a timing standpoint on revenue specifically, but the trend is very positive.

[Danny Eggerichs, Equity Research Analyst at Craig-Hallum]

Okay. That's great. Appreciate the call.

[Jeffrey Graves, President and CEO at 3D Systems]

Okay. Stay warm, Danny. Have a good Thanksgiving.

[Operator]

Thank you. Our next question is coming from Troy Jensen from Cantor Fitzgerald. Your line is now live.

[Troy Jensen, Managing Director at Cantor Fitzgerald]

Hey, gentlemen. Thanks for taking my questions here. I guess, Jeff, one thing that I picked up at Formnext that I thought was kind of new was a lot of positive talk about Oqton. You did mention it in your kind of prepared remarks, but could you just kind of talk, give us an update on software in general and 3DXpert?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah, sure, Troy. And thanks for the call. And thanks for the interest at Formnext too. Yes, you asked about two things there, and I'd throw in a third. So our 3D Sprint software, which drives our polymer machines and 3DXpert on the metal side, tremendously valuable tools for people that want to apply 3D printing.

[Jeffrey Graves, President and CEO at 3D Systems]

What we've done now with Oqton is basically integrate 3DXpert into the Oqton workflow. And we've really targeted and focused Oqton on the high reliability markets like oil and gas we're doing with Baker Hughes and others. But that software platform, Troy, will allow us to monitor the entire workflow, not us, but customers that license it, the entire workflow from raw materials to finished parts. And what we're seeing in the Baker Hughes production lines right now is a tremendous improvement in the productivity and quality of parts they can get out. The real-time monitoring, the feedback control, the traceability required. So it impacts everything from setup time to the time a part is produced, and it gives you full traceability of the part when it's finished. So we're making 3D printing a true production process with this.

[Jeffrey Graves, President and CEO at 3D Systems]

Interesting feedback from Baker Hughes as also a customer of the software was this industry is now starting to really think about how to use 3D printing in production, whereas before it mainly went into laboratories for prototyping and even demo parts. Now it's being used on the factory floor. Those requirements are so different and so much more rigorous in terms of monitoring the job, monitoring the actual production of the part. I'm really pleased with Oqton's progress. I think we'll demo it very nicely with Baker Hughes, and then we're rolling it out broadly to other primarily industrial applications that have to make high-reliability parts. Energy, aero, certainly the medical markets, anybody that has to make a high-reliability part at high productivity.

[Troy Jensen, Managing Director at Cantor Fitzgerald]

Perfect. Okay. How about two other questions here? Did you have a 10% customer in the quarter?

[Jeffrey Graves, President and CEO at 3D Systems]

We do. Jeff, I have to, yeah, I'm sure. I don't have the number in front of me, Troy, but it would be in our queue, I believe, Jeff, right? So it's in our queue. And certainly, it would be related to dental, Troy, as it has been historically true. So that relationship remains very strong. The indirect printing of aligners is a great way to make them, and we continue to be a key supplier in that market. So yes, I mean, and I don't have a number, Troy, but it's in the queue, and we can certainly get back to you.

[Troy Jensen, Managing Director at Cantor Fitzgerald]

Yep. I'm just glad to hear back. And then just last question, regenerative business, can you just talk about when you expect to hit the next milestones?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah, Troy, I think we'll see some additional milestones in 2025. I wish we could talk more about it.

[Jeffrey Graves, President and CEO at 3D Systems]

Both the precision and the speed at which we can print extremely fine structure now is amazing. We have multiple paths to the design of those printers for production applications for organs and human bodies, specifically lungs, so I am really pleased with progress on the technology and the implementation of that for lung manufacturing, so you can expect to, we'll be talking about milestones in 2025 that we're hitting, and I continue to believe we're on track to be in a position to get to human demonstration on a reasonable timeline. United Therapeutics, our partner in this, will have to speak to that milestone, but in terms of the printing technology and things and the materials that go with it, extremely pleased with progress, and Troy, just one more advertisement for that. It's really cool applications that are going to bring a lot of benefit to humanity.

[Jeffrey Graves, President and CEO at 3D Systems]

It's also generating some great technology that we can transition into our industrial printers. For example, the PSLA with this high-precision projection system over vat, that's a direct outgrowth of our work on regenerative. So if you take a hardened projector that's used for industrial applications for workflow, it's a direct transfer and a drop-in. So you'll see some real technology synergy coming out of our work on regenerative into our industrial markets.

[Troy Jensen, Managing Director at Cantor Fitzgerald]

Awesome. All right, guys. Good luck going forward. Happy Thanksgiving.

[Jeffrey Graves, President and CEO at 3D Systems]

Thanks, Troy. Happy Thanksgiving to you too. Bye.

[Operator]

Thank you. Next question today is coming from Ananda Baruah from Loop Capital Markets. Your line is now live.

[Jeffrey Graves, President and CEO at 3D Systems]

Good morning, Ananda.

[Ananda Baruah, Research Analyst at Loop Capital Markets]

Good morning. Good morning. Yeah, thanks for taking the question. Happy Thanksgiving. Yeah, appreciate you guys taking the question here. I guess a couple if I could.

[Ananda Baruah, Research Analyst at Loop Capital Markets]

The first is on just sort of the core healthcare business and industrial solutions. Sort of taking it backwards, sort of the softer sellout notwithstanding, you guys do seem like the last three quarters, you kind of baselined at this high 50s, low 60s run rate. And in healthcare, you've picked up both because of the dental business and then also here's kind of the question: is there anything in personalized healthcare as distinct from dental that we should be aware of? And so really, with that as a backdrop and sort of the supplies business continuing to grow, what does the baseline business look like into 2025?

[Ananda Baruah, Research Analyst at Loop Capital Markets]

Understanding, Jeff, you're not giving guidance yet, but if industrial solutions have baselined right now, and if you're seeing a pickup in healthcare, and if you're also seeing a pickup, ongoing growth in supplies, what does that say structurally about going into 2025?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah. So on that, I'll start with the last point, Ananda. Yeah, all of that would lead you to say, "Look, 2025 should be a better year." As long as I think the whole world feels a bit snakebit, as long as the geopolitical climate calms down and the economies continue moving in the direction they are, the unknown is that we have a change in administrations in not only the U.S., but potentially other countries, and these wars tend to flare up periodically.

[Jeffrey Graves, President and CEO at 3D Systems]

So all of that said, which are unknowns, the trends are moving in the right direction in terms of both printer platform sales and consumable sales over the future. So hopefully, we'll be sitting here when we announce Q4 results, and we'll talk about a stronger 2025. And also, I think we've got some real cost opportunities, quite frankly. So we've been consistent in our investments in R&D. Those are paying dividends now. And we've got some flexibility going into 2025 to really manage our cost structure in a more optimum way. So I think there's some real opportunities within the four walls and then also in the external environment. In terms of healthcare, Ananda, it's a great business. The orthopedic business, as I call it, the work we do for surgical planning on bone repair and surgeries is terrific.

[Jeffrey Graves, President and CEO at 3D Systems]

We continue to gain FDA approvals for other areas of the body. We're very strong in everything above the neck, fundamentally, and on the spine. We're continuing to grow throughout the body elsewhere. And it's a clear strategy. We're going to expand those applications below the neck just as quickly as we can develop them because all the same basic tools apply. So I expect to continue to see growth. There may be noise quarter to quarter, but continue to see growth in that business. And it's a very good business, very hard for others to get into unless it takes time. So I think that's a great business. The dental business, we've got a good foundation with indirect aligners. And I think you'll see a lot of new products hit the market. And I mentioned dentures on the call. Great business.

[Jeffrey Graves, President and CEO at 3D Systems]

I think 3D printing is a natural for those, and we have a great offering. So I'm excited about 2025 for dentures, funny as that sounds. And then you've got other dental applications, night guards, and others. So I love the healthcare business. It continues to be a core focus of the company. On the industrial side, these high-reliability markets, we're swamped with interest on new applications from customers. And I would hope 2025 would see them start spending some real capital money in those directions because the payoff is clear. And that gets back to the world economy and their factory utilization. So hopefully, in all of that, I answered your questions. If I can clarify anything, I'm happy to do it, Ananda.

[Ananda Baruah, Research Analyst at Loop Capital Markets]

No, that's really great. And just a quick follow-up on tariffs. Anything to be aware of in the tariffs that have been announced so far or supposed to be announced?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah. Ananda, yeah, it's very interesting. And this is all public. If you look at the tariffs that have been talked about, and particularly with respect to China, the Chinese metal printing companies have sprung up over the years. And I think aim toward Chinese markets and others. They're increasingly looking to export those products into the U.S. And a lot of the U.S. applications are defense-oriented. So I think both the tariff situation and the focus on defense will help us as a U.S. company. I think it's a great thing because the influx of those printers, and I've shared this information, it's all publicly available, has been high.

[Jeffrey Graves, President and CEO at 3D Systems]

I would hope as onshoring and supply chain shortening effects take hold, if we do see tariffs coming in, and certainly the growth in defense and aerospace, those are all positives for us as a U.S. company.

[Ananda Baruah, Research Analyst at Loop Capital Markets]

Super helpful. Thanks a lot. Have a great holiday, you guys.

[Jeffrey Graves, President and CEO at 3D Systems]

Thanks, Ananda. You have a great Thanksgiving as well.

[Operator]

Thank you. As a reminder, that star one to be placed in the question queue. Our next question is coming from Brian Drab from William Blair. Your line is now live.

[Operator]

Good morning. Tyler here, filling in for Brian. It was great color in the data center equipment. Sounds like additive would be great for the cold plates that go on GPUs and the other data center infrastructure. But I only have two questions today. First, what are your plans for convertible debt coming due in 2026?

[Operator]

And then second, you mentioned a target of mid-40s% gross margin. What revenue rate would need to be to support those levels? Assuming that on historically similar revenue levels going forward, you'd probably do higher margin just driven by the insourcing efforts. If you could just elaborate on that situation. Appreciate the time and happy Thanksgiving.

[Jeffrey Graves, President and CEO at 3D Systems]

Thanks so much for the question, and a happy Thanksgiving to you as well. You touched on the key points. Basically, our gross margins, if you look at COGS, that's going to be a direct outgrowth of factory volumes and the increased benefit from insourcing. Clearly, as volumes rise, it's a good thing for factory utilization rates. The other benefit that brings us is a lower propensity to write down inventory. The reality is we absorbed a lot of inventory when we insourced manufacturing aggressively over the last two years.

[Jeffrey Graves, President and CEO at 3D Systems]

I would tell you, for everybody listening on this call, I think it's a tremendous move for a low-volume, high-mix company like ours in this industry. Taking full control over your product from the start of design to the time you ship and install to a customer is critically important in controlling the pace of new product introduction and the quality of the product you ship. I firmly believe that. We spent great effort insourcing. Unfortunately, with that, we had to absorb a lot of inventory from our contract manufacturing partners that they had purchased. We're working that inventory down. We'll bring it down 20% this year from a starting point. We'll continue to do that. Unfortunately, if volumes stay low in the plant, you're more exposed to inventory write-offs due to just aging of the parts.

[Jeffrey Graves, President and CEO at 3D Systems]

They don't go bad, but they age out according to your policy. So we had some headwinds on the last two quarters from that. Hopefully, as volumes pick up, that effect, that kind of over-the-top effect will go away. And you'll see improvements in factory utilization. So both those will really help gross margin significantly. And then on top of that, we're rolling out new materials all the time. So new consumables. We're also really driving services because the customers that have factories want great service. So the increase in services revenue, the increase in materials revenue will all support higher gross margins. So fundamentally, those are the levers. And I have no doubt we can get to mid-40s. That's our near-term goal.

[Jeffrey Graves, President and CEO at 3D Systems]

We have a long-term goal of getting over 50, which, given the growth in metals in the world right now and the relatively lower materials pull-through on metals, that's a challenge. But we're getting there. We're headed that direction. And I have confidence over the long term we will get there. And then eventually, some of the metal materials will probably evolve to match 3D printing as well. But for now, there's not a lot of materials pull-through from our standpoint on the metal side. So it is a drag on the overall gross margin. But we're getting there. It's improving. And I'm thrilled to have both metals and polymers in our portfolio. Some of the most exciting applications we're seeing on the industrial side are hardcore metal applications with difficult materials like copper, which are hard to print.

[Jeffrey Graves, President and CEO at 3D Systems]

So long-winded way of saying, those are the elements that get us to mid-40s and then up to 50%, which is our ultimate goal.

[Jeffrey Graves, President and CEO at 3D Systems]

Thank you, Jeff. That's great color. I just wanted to follow up on the plans for the convertible debt coming due in 2026. Just any color you can provide there. Thank you.

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah. It's certainly a work in progress, I would tell you right now. I mean, that's been a lovely debt instrument for us. We obviously went to market at a great time, and it's a zero-coupon piece of paper. It's been terrific for us. It will come due at some point. We got to deal with that. And so we're looking at how do we do that with the most traditional methods we can, okay? So we're looking at how we can really reduce that debt.

[Jeffrey Graves, President and CEO at 3D Systems]

I'm not in a position to talk about it today, but clearly, we want to deal with it as early as possible and not get into toward maturity dates. So you'll hear a lot more about that in 2025, okay?

[Jeffrey Graves, President and CEO at 3D Systems]

All right. Sounds good. Looking forward to 2025 for you guys and have a happy Thanksgiving again.

[Jeffrey Graves, President and CEO at 3D Systems]

Thank you and happy Thanksgiving to you and Brian as well, okay?

[Operator]

Thank you. Next question is coming from Jacob Stephan from Lake Street Capital Markets. Your line is now live.

[Jacob Stephan, Senior Research Analyst at Lake Street Capital Markets]

Hey, good morning, guys. Thanks for taking my questions. Just curious on the healthcare business. Obviously, nice to see that return to growth this quarter, but maybe just kind of give us a sense on order patterns now that we're kind of two-thirds of the way through Q4. I mean, do you feel like kind of the revenue level where you guys were at in Q3 here is a good, I guess, a place to build off of, or do you expect to see stability here?

[Jeffrey Graves, President and CEO at 3D Systems]

Yeah. So first, good morning, Jacob, and a happy Thanksgiving to you coming up. Thanks for calling today. Yes, I think this is the foundation to build from. Healthcare is on the orthopedic side of our business, of the healthcare business; it's a good, steady business. And the nice thing for us, we're doing two things to grow that business. Number one is developing more applications below the neck for the skeleton below the neck. And it's really a great business. It continues to grow nicely, steadily over time. We work closely with the FDA to get certifications on those. It's a great business.

[Jeffrey Graves, President and CEO at 3D Systems]

We are moving with our partners, our channel partners, into the trauma field in that, which I'm really excited about. Obviously, it's tragic when someone comes to an emergency physician with trauma to the skeleton. And our technology can apply there. It challenges us on speed because those people need very fast treatment. But it's a lovely growth area for our business, so I like that. And we've been stronger in the U.S. than Europe in that personalized health service. So Europe remains a strong focus as well, and in fact, some other parts of the world. So I look at all those growth vectors. I like the foundation of the business today. It's a terrific business, strong brand, very happy. I see it growing from here. The dental business, obviously, a little bit more volatile. We've been very primarily in indirect printing of aligners.

[Jeffrey Graves, President and CEO at 3D Systems]

And we're diversifying that portfolio now as we move into dentures and elsewhere. So a little bit more volatility as those markets rise and fall. But the diversification of the portfolio will really help in dental over time. And you'll see that over the next two years. So again, expect quarter-to-quarter noise like any business. But by and large, that healthcare business in total is going to continue to grow for us, and we're thrilled with it. It's a terrific business to be in.

[Jacob Stephan, Senior Research Analyst at Lake Street Capital Markets]

Got it. And then maybe just kind of on the, I guess, insourcing initiative, requiring more inventory to be repurchased back from your contract manufacturers. I'm just curious, I guess, what percentage of that kind of inventory surplus was repurchased from the contract manufacturers and maybe any kind of?

[Jeffrey Graves, President and CEO at 3D Systems]

Oh, gosh. Yeah, Jacob.

[Jeffrey Graves, President and CEO at 3D Systems]

We had to buy, and I don't have a real number for you, but we had to buy, I think, Jeff, well over $100 million of inventory we had to bring back in-house. I'll be frank with you, Jacob. I was not pleased. I'm not blaming them. We were a small customer to these very large contract manufacturers. I was not pleased with their inventory management, their supply chain management, and the quality of the product they were shipping on our behalf, and the speed at which you could introduce a new product. Those four things drove us to insource, okay? We're headquartered in South Carolina. It's a lovely place to build product. We've insourced 80%-90% of our business now, largely in South Carolina. We do some manufacturing in Europe as well.

[Jeffrey Graves, President and CEO at 3D Systems]

But as a part of that whole taking it back in, we needed to buy the good inventory that they had purchased on our behalf. So it created a small mountain, not Mount Everest, but a small mountain of inventory that we've been burning down. So we'll continue to work away at that. It's all good stuff, good parts, but we've just got to continue to work it down. And it's been difficult in a low-sales environment. That's been challenging. So I'm proud of the 20% reduction we'll attain by the end of the year, but we've got more to go. And on the bright side, when you do it, it's a good source of cash. It frees up cash.

[Jeffrey Graves, President and CEO at 3D Systems]

But we've been able to make the investment because we had a lot of cash on the balance sheet, so we did that at a time where we could afford it. And as we work it down, we'll realize the benefit from a cash and from a gross margin standpoint on COGS.

[Jacob Stephan, Senior Research Analyst at Lake Street Capital Markets]

Got it. Very helpful. Appreciate all the color. Happy Thanksgiving and looking forward to 2025 for you guys.

[Jeffrey Graves, President and CEO at 3D Systems]

We are too. Thanks so much for calling in.

[Operator]

Thank you. We've reached the end of our question and answer session. I'd like to turn the floor back over to Jeff for any further closing comments.

[Jeffrey Graves, President and CEO at 3D Systems]

Hey, Kevin, first of all, I want to wish you a very happy Thanksgiving as well. You've been terrific at moderating our calls for many, many quarters now, so thank you for that.

[Jeffrey Graves, President and CEO at 3D Systems]

For everybody else that's tuned in, I want to thank you all for joining our call today. For those in the U.S., I wish you all a happy and safe Thanksgiving holiday with your families. For those outside of the U.S., I wish you a very happy holiday season coming up. We'll look forward to talking to you again, at least in the new year.

[Operator]

Thank you. That does conclude today's teleconference and webcast. You may disconnect your line at this time and have a wonderful day. We thank you for your participation today.

Participants

Executives

• Mick McCloskey, VP of Investor Relations
• Jeffrey Graves, President and CEO
• Jeff Creech, EVP and CFO

Analysts

• Danny Eggerichs, Equity Research Analyst at Craig-Hallum
• Ananda Baruah, Research Analyst at Loop Capital Markets
• Troy Jensen, Managing Director at Cantor Fitzgerald
• Analyst at William Blair
• Jacob Stephan, Senior Research Analyst at Lake Street Capital Markets
• Jim Ricchiuti, Senior Analyst at Needham & Company