Core Molding Technologies Q1 2026 Earnings Report

Core Molding Technologies EPS Results

• Actual EPS: N/A
• Consensus EPS: $0.22
• Beat/Miss: N/A
• One Year Ago EPS: N/A

Core Molding Technologies Revenue Results

• Actual Revenue: N/A
• Expected Revenue: $59.43 million
• Beat/Miss: N/A
• YoY Revenue Growth: N/A

Core Molding Technologies Announcement Details

• Quarter: Q1 2026
• Date: 5/7/2026
• Time: Before Market Opens
• Conference Call Date: Thursday, May 7, 2026
• Conference Call Time: 10:00AM ET

Core Molding Technologies (NYSEAMERICAN:CMT) is a publicly traded manufacturer specializing in engineered composite and polymer solutions for a wide array of industrial applications. The company’s core business includes the design, tooling and high-volume production of fiberglass-reinforced plastics, advanced polyurethane systems, structural composites and specialty coatings. Its products find use in commercial vehicles, off-highway equipment, defense, power sports, recreation and industrial markets.

Core Molding offers end-to-end services ranging from digital design and prototyping to mold fabrication, process development and full-scale manufacturing. Leveraging technologies such as open‐mold glass fiber, sheet molding compound (SMC), reaction injection molding (RIM) and elastomeric urethane, the company addresses both complex geometries and demanding performance requirements. In addition to component production, Core Molding provides assembly, finishing and value-added services to deliver ready-to-install modules.

Headquartered in Lima, Ohio, Core Molding Technologies operates multiple manufacturing facilities across the United States, Canada and Mexico. This North American footprint supports flexible capacity planning and regional engineering support for original equipment manufacturers within its served industries. The company maintains quality and regulatory certifications aligned with automotive, defense and industrial standards.

Founded in 1997 as a consolidator of specialty molding operations, Core Molding has expanded its capabilities through strategic investments in automation and engineering talent. Led by an experienced management team with deep expertise in composites and polymers, the company continues to pursue growth across its core end markets by enhancing product performance, expanding design services and strengthening customer partnerships.

Core Molding Technologies Q1 2026 Earnings Call Transcript

Key Takeaways

• Positive Sentiment: Mexico expansion is ahead of schedule with an additional planned ~$19M investment in 2026; Monterrey consolidation is expected by end of Q2 and Matamoros will add ultra-large 4,500-ton presses to materially increase capacity.
• Positive Sentiment: The company booked $17M of new wins in Q1 — including a $9M/year multi-year battery energy storage award — and cites a >$220M pipeline with a $50M new-win target for 2026 and visibility to revenue potentially >$300M in 2027.
• Negative Sentiment: Revenue fell 4.7% YoY due to truck-cycle softness, and operating cash flow was a use of $9.2M with expected negative free cash flow of about $13M as the company executes its Mexico investments and $25–30M of planned capex.
• Positive Sentiment: Q1 gross margin improved to 20.4% (the best in over a decade), though management reaffirmed full-year gross margin guidance of 17%–19% given tooling mix expected in Q4.

Presentation

[Operator]

Good morning, everyone. Welcome to the Core Molding Technologies Fiscal 2026 First Quarter Financial Results conference call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by 0. After today's presentation, there will be an opportunity to ask questions. To ask a question, you may press star then 1 on your telephone keypad. To withdraw your question, please press star then 2. As a reminder, this event is being recorded. I'll now turn the conference over to Sandy Martin of Three Part Advisors. Please go ahead.

[Sandy Martin, Managing Director at Three Part Advisors]

Thank you, and good morning, everyone. We appreciate you joining us for the Core Molding Technologies conference call to review our fiscal 2026 first quarter results. Joining me on the call are the company's COO and incoming President and CEO, Eric Palomaki, and CFO, Alex Panda. Dave Duvall, current CEO, will also be on the call for the Q&A session, and this call is being recorded. This call will also be webcast and can be accessed through coremt.com via an audio link on the Investor Relations Events and Presentations page. Please be advised that any time-sensitive information may no longer be accurate as of the date of any replay or transcript reading.

[Sandy Martin, Managing Director at Three Part Advisors]

Statements made in today's discussion that are not historical facts, including statements or expectations or future events or future financial performance, are forward-looking statements and are made pursuant to the Safe Harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are uncertain and outside the company's control. Actual results may differ materially from those expressed or implied, and today's earnings release includes our forward-looking disclosures. Risks, risk factors and other uncertainties are described in detail in the company's filings with the Securities and Exchange Commission. Core Molding Technologies assumes no obligation to update or revise any forward-looking statements publicly. Management will refer to non-GAAP measures, including adjusted EPS, adjusted EBITDA, the debt to trailing twelve months EBITDA ratio, free cash flow, and return on capital employed.

[Sandy Martin, Managing Director at Three Part Advisors]

Reconciliations to the nearest GAAP measures are available at the end of our earnings release, which has been submitted to the SEC on Form 8-K. Now, I would like to turn the call over to Eric L. Palomaki. Eric L.?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thank you, Sandy, and good morning, everyone. Our first quarter of 2026 was a busy one. While product revenue was lighter, our team was hard at work executing our growth strategy, delivering $17 million in additional new wins, relocating five of nine presses into our new facility in Monterrey, and posting our best gross margin quarter in over a decade. The Must Win Battle focus on our Mexico expansion is on track, and we continue to execute our flawless launch playbook across 50 already won projects. As this is Dave's last earnings call as CEO, I want to take a moment to recognize and thank him for his tremendous impact on Core Molding Technologies. Working alongside Dave has been a privilege. He has been instrumental in shaping our company culture and in my growth as a leader.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

His leadership, integrity, and steady hand helped set the direction of this company, and his mentorship through challenges, milestones, and countless everyday conversations has left a lasting impression. Dave, thank you for your trust, your support, and for setting an example of excellence. As I fully transition into the CEO role this month, we have taken deliberate steps to reinforce operational leadership and continuity, backfilling my COO responsibilities. We have split the COO role into two positions, underscoring our commitment to promoting from within and ensuring organizational readiness. Arnold Alanis now leads our Mexico operations, and Michael Gayford oversees the U.S. and Canada operations. Both leaders exemplify Core's four values: being a learning organization, having the courage to challenge, showing mutual respect, and operating with transparency. Speaking about operations, I wanna once again recognize our teams for their disciplined execution and exceptional service to customers.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

In the quarter, we achieved 99.1% on-time delivery and a quality performance of 52 parts per million. In our business of making large, complex composite assemblies, our ability to be trusted with major product launches is a key value proposition and a major reason why Core wins repeat business or why Core is able to grow our wallet share. These results demonstrate our focus on standard work, consistency, and operational excellence. With Arnold Alanis and Michael Gayford leading our operations, I'm able to spend more time with our commercial and financial leaders. As we like to say, our two Alexes. Alex Bantz, Core's Chief Commercial Officer, and Alex Panda, our Chief Financial Officer. If you're looking for me, chances are I'm with one of the Alexes focusing on growing the company.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Turning to the first quarter performance, we are very pleased with the continued momentum of our Invest for Growth initiatives, which generated $17 million in new business wins. We are also pleased to report gross margins exceeding 20%. While this performance reflects strong execution, Alex will provide more color on our full-year margin outlook in a few moments. The $17 million in new business awards included a significant multi-year battery energy storage system project. These battery energy storage systems are becoming more widely used for reducing power loads, coupling with renewable power generation, and adjusting for grid load changes or disruptions. Within transportation, we continue to support specialty electric truck platforms, serving route-based fleets such as postal vehicles, trash trucks, and electric buses, many of which are owned by municipalities.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Some of the newest battery enclosure opportunities we are currently working on are tied to grid reliability applications, including grid hardening and load shedding. While battery adoption has moderated in consumer EVs, demand is expanding rapidly in grid infrastructure, we're engaged with customers and industry partners to capture that growth. To support our sales pipeline, we've added one business development manager during the first quarter and are planning two additional hires this quarter. As part of powersports market, we continue to expand our proprietary skid plate technology, which we developed approximately two years ago and launched in the third quarter of 2025. New wins this quarter include a prominent OEM traditionally known for agricultural and farm equipment, further broadening the application of this technology.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

As previously discussed, we are seeing meaningful signs of industry recovery, with major OEMs launching new product features that include additional core molding components across watercraft, skid plates, and cargo boxes. The first quarter marked the third consecutive quarter of year-over-year revenue growth in our powersports market, with a year-over-year growth of 46%. We remain focused on scaling the adoption of Core's SMC offerings and topcoat capabilities, which enable us to serve as a preferred supplier of Sheet Molding Compound , as well as deliver finished installation-ready systems. These value-added capabilities allow us to participate more broadly across the supply chain, supporting applications in construction equipment, agricultural machinery, aerial lifts, and other industrial markets. Our topcoat paint capability differentiates Core by enabling installation-ready systems that reduce total cost and improve manufacturing efficiency for our OEM customers.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Together, these investments expand our technical capabilities, deepen customer integration, and support durable, higher-value revenue streams that align our long-term growth and margin objectives. All of Core's proprietary compounds and SMC materials remain on track and are expected to be in production during the second half of 2026. As we previously discussed, we invested $6.5 million in 2025 to expand our operations in Mexico, including a greenfield facility, and we plan to invest an additional $19 million this year. These projects are ahead of schedule, with all work in Monterrey is expected to be completed by the end of the second quarter. We view Monterrey region as a long-term secular growth market, strategically positioned closer to key customers. Our expansion in Matamoros includes the installation of ultra-large 4,500 ton compression molding presses in Matamoros, continuing through the second half of 2026.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

That is 9 million pounds of pressing force per press, or 18 million pounds that will be operational by year-end. We hope you're able to join us in September for our Investor Day, where we'll be able to get up close and see how these massive composite molding systems create 100 plus pound parts for sleeper roof assemblies. Looking ahead, we expect truck market volumes to begin recovering in the second half of 2026, and when combined with the $63 million in new wins secured in 2025, which will launch throughout 2026 and early 2027, we maintain visibility into total product revenue that could exceed $300 million in 2027. As a sole supplier on long-term OEM programs, we benefit from long-term customer relationships that provide strong forecasting visibility while recognizing that macro conditions can influence timing.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

With that, I'll now turn the call over to Alex to review financials in more detail.

[Alex Panda, CFO at Core Molding Technologies]

Thank you, Eric, and good morning, everyone. As expected, first quarter revenues declined by 4.7% year-over-year, driven primarily by previously discussed truck cycle dynamics. In Q1, medium and heavy-duty truck sales represented 34% of Core's total product sales, which is down from 44% in fiscal 2025. As Eric noted, we delivered strong gross margins of 20.4%, an increase of 120 basis points year-over-year and 520 basis points sequentially. This performance was driven by a favorable revenue mix, including a shift away from tooling and toward higher margin product revenue. While pleased with our first quarter margins, we remain comfortable reaffirming our full year gross margin target range of 17%-19%, particularly given the elevated tooling revenue expected in the fourth quarter.

[Alex Panda, CFO at Core Molding Technologies]

Our powersports end markets continued to expand during the quarter, delivering 45.7% year-over-year revenue growth. This acceleration likely pulled some volume forward from the second quarter as OEMs prepared for spring demand. SG&A expense in the first quarter was $11.2 million or 19.1% of sales, compared with 14.6% in the prior year period. SG&A this quarter included $2.1 million of Mexico expansion related expenses and $924,000 of succession related costs. Excluding these items, normalized SG&A would have been approximately $8.2 million or 14% of sales. Operating income for the quarter was $764,000 compared to $2.8 million in the prior year period, reflecting the SG&A items discussed. Net income was $605,000 or $0.07 per diluted share.

[Alex Panda, CFO at Core Molding Technologies]

Adjusted EBITDA was $7.3 million or 12.5% of sales, compared to $7.2 million or 11.7% in the prior year period. Operating cash flow for the quarter was a use of $9.2 million, driven by planned investments in our Mexico growth initiatives, including tooling payments, press relocations, and inventory bank bills. Capital expenditures totaled $3.8 million, resulting in an expected negative free cash flow of $13 million, consistent with our budget and investment plan. For the full year, we continue to expect capital expenditures of approximately $25 million-$30 million, with $18 million-$20 million allocated to Mexico organic growth initiatives. These planned investments reflect our confidence in the returns we will earn from our organic growth initiatives and the strong execution delivered by our operating teams.

[Alex Panda, CFO at Core Molding Technologies]

As of March 31st, our balance sheet remains strong, with total liquidity of $73.5 million, including $23.5 million in cash and $50 million of availability under our revolver and capital credit lines. Term debt totaled $19.3 million, and our debt-to-EBITDA ratio remains below 1x on a trailing twelve-month basis. Return on capital employed was 6.8% or 7.9%, excluding cash, based on trailing twelve-month pre-tax operating income. As new programs launch and asset utilization improves, we expect ROCE to strengthen. Additional details, including GAAP to non-GAAP reconciliations, are available in our earnings release. Our capital deployment strategies prioritizes organic growth with continued disciplined debt and working capital management.

[Alex Panda, CFO at Core Molding Technologies]

During the quarter, we repurchased 24,545 shares at an average price of $18.62 per share for a total of $457,000. In March, we increased our share repurchase authorization by $6.5 million and intend to continue opportunistically offsetting dilution from equity compensation. For fiscal 2026, we continue to expect the following: one. Total sales to be flat to up approximately 5%, with tooling revenue weighted toward the Q4 ,two. The majority of the $63 million new program wins secured in 2025 we expect to contribute to the second half of 2026 and hit full annualized volumes in 2027. three. We continue to remain cautiously optimistic as we start seeing order builds for truck cycle recovery in the second half of this year.

[Alex Panda, CFO at Core Molding Technologies]

four, full year gross margins in the range of 17%-19%. five, the company incurred $2.1 million of Mexico expansion-related expense during the first quarter and expects to incur approximately $900,000 in the second quarter. six, during the first quarter, the company incurred $924,000 of succession planning related costs and expects to incur approximately $900,000 more over the balance of 2026, primarily in the second quarter. Switching to a discussion on tariffs and recent oil prices, our customers currently benefit from preferential tariff treatment under the USMCA, which is scheduled for a joint governmental review beginning in July 2026. Any changes could affect demand patterns, and we continue to monitor potential impacts on our customers and end markets.

[Alex Panda, CFO at Core Molding Technologies]

With respect to recent increases in oil prices, we have contractual mechanisms in place that will allow us to pass through a majority of these costs. With that, I would like to turn it back to Eric.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thank you, Alex. We are pleased with the progress of our Must Win Battle this year, particularly the execution of our Mexico expansion, which remains on schedule and aligned with our budgeted projections. We believe these organic investments further differentiate Core as a leader in highly specialized, large and ultra-large molded solutions. As we grow, we remain anchored in the fundamentals, operating with the highest standards and discipline around safety, people, quality, delivery, and cost, while staying closely aligned with the voice of our customer. Our business development pipeline continues to exceed $220 million in high-quality opportunities. With $17 million in new awards secured in the first quarter, we are confident in our target of $50 million in new program awards during 2026. Importantly, these wins continue to include customers in new and emerging markets for Core and align well with our strategic diversification priorities.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Target segments include specialized transportation applications for electric vehicles, inner box panels for electric pickup truck platforms, satellite tracking systems, building products, construction and agriculture, increased demand for SMC compounds, and our expanding top coat paint capabilities. We remain highly focused on scaling our execution excellence, leveraging our fixed cost base, optimizing our manufacturing footprint, and strengthening operational discipline across the enterprise. Our commercial organization is energized and fully supported by the broader company. As a result, we continue to make progress towards our long-term objective of $500 million in annual revenue while staying intensely focused on profitability, cash flow generation, and returns on capital employed. While strong demand in our powersports market benefited from some revenue being pulled into the first quarter, we believe the recovery has momentum. Combined with continued wallet share expansion and organic sales growth, we are building commercial momentum.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

We are purposefully targeting large, growing, diverse end markets, including construction, energy, industrial, aerospace, and medical. We are increasingly engaging customers earlier in the design cycle. These customers are seeking strategic partners like Core that can deliver design, fabrication, and finished installation-ready systems under one roof, backed by a proven track record of flawless launch execution and reliability. I wanna thank our dedicated employees. Your commitment, skill, and hard work make all of this possible. We are equally grateful to our customers, shareholders, and board for their continued confidence and support as we execute our strategy. As we mentioned last quarter, we will host an Investor Day in Brownsville, Texas on September twenty-ninth and thirtieth. As we prepare for our upcoming Investor Day, this event will also serve as a meaningful moment to celebrate a major milestone for our company. Core's 30-year anniversary.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Our program will include presentations on the afternoon of day one and a tour of our Matamoros facility, including a manufacturing shop floor tour of our manufacturing execution engine on the morning of day two. The facility tour will highlight Core's ultra-large composite manufacturing capabilities, which include two new 4,500 ton presses I spoke about earlier, which we believe are among the strongest in North America. We plan to distribute a save the date in the next couple weeks. If you're interested in attending and do not receive the invitation, please reach out to us. We will participate in the East Coast IDEAS Conference in New York City on June tenth, where we will host a presentation and one-on-one meetings. Please contact us if you'd like to schedule time with management. With that, we'll open the line up for questions. Operator?

[Operator]

Yes, thank you. We will now begin the question and answer session. To ask a question, you may press star then one on your telephone keypad. If you're using a speakerphone, please pick up your handset before pressing the keys. If any time your question has been addressed and you would like to withdraw it, please press star then two. At this time, we will pause momentarily to assemble the roster. The first question comes from Chip Moore with ROTH.

[Chip Moore, Analyst at Roth Capital Partners]

Hey, good morning. Hey, guys. Thanks for taking the question.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Hey, good morning, Chip.

[Chip Moore, Analyst at Roth Capital Partners]

Hey, how you doing? I wanted to ask, you know, powersports very strong, you know, maybe talk a bit more about I think it sounds like there was a little bit of pull forward, you know, help us size that, you know, and some of the seasonal dynamics. Any thoughts on that market, you know, with just fuel prices, in general and, you know, with that pull forward, just help us think about Q2 impacts, given that, you know, trucking is more of a back half story for pickup.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Overall for powersports, Chip, I'd say we definitely see the recovery of powersports. You know, the bust associated with COVID is back. Dealer inventories are back to what they would call moderate and normal levels. If you look at a lot of our customers, they're very happy with that situation. With our watercraft portion of powersports, we got a pretty good first quarter there. You can see that in the numbers. We wouldn't necessarily expect that to maintain through the, you know, the next few quarters. The skid plate that we launched last year is now at full run rate. That will continue throughout the year. In general, you should see powersports up. Q1 being maybe up a little bit more than what we would expect the rest of the year.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

That's not to say a massive decrease in Q2 or anything to expect there. Just a really good first quarter.

[Chip Moore, Analyst at Roth Capital Partners]

Got it. That's helpful. Thank you. And maybe just, you know, on new business, you know, you outlined some of the investments there and targets, just what you're excited about and maybe, you know, the battery opportunity in general. It sounds like you got a nice win there. Just, you know, how large?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yeah

[Chip Moore, Analyst at Roth Capital Partners]

Do you think that market can be for you?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

I'll start on just specifically the awards for the first quarter. One of those was that battery energy system customer, and that's a $9 million a year, and they committed to three years of that volume at a minimum also with us. Very nice. Sometimes we're very excited about the big OEM business that has 5-10 year lengths on it, but having a customer like this commit to three years of volume additionally is a very nice thing to have when we're in these diversified markets. We're working with a couple other customers in the same category of battery energy system, but the 1st one is a pretty sizable one. Of that $17 million, $9 million of it is made up of that customer.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

We won another product that leverages the skid plate technology that we developed two years ago. That's worth a couple million in the powersports world. We won another aero truck roof deflector that's worth another $5 million. The nice thing about that one is it's with a truck OEM that we don't do a lot of typical business with, so we're expanding a little bit with some other customers in the truck and transportation space. Really big panels on a roof or an air deflector are perfect for us. That's another very nice project worth about a little under $5 million a year when it launches in 2028.

[Chip Moore, Analyst at Roth Capital Partners]

That's great color. That battery win, that $9 million per year, is this, you know, transport or is this on the grid side that you were referencing?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yeah, grid side. Stationary batteries where you build a very large bank and building of batteries to load shed or to cover for, different types of energy situations.

[Chip Moore, Analyst at Roth Capital Partners]

Interesting. A great market opportunity for you guys.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Similar technology to like an EV battery, but you don't have the same requirements of crash ratings and things like that. SMC is a perfect composite solution to build a very large battery pack. And then they're just basically stacked in racks, you know. Not in a data center, but sometimes are supporting data centers in terms of instead of generation, like there are a lot of natural gas generators that are added to data centers everywhere. This is an alternative to that. If you thought you needed to cover for an hour of power shortage or three hours of power shortage, you could do it with batteries instead of natural gas generators.

[Chip Moore, Analyst at Roth Capital Partners]

Yeah. No, excellent. To your point, SMC, are you know, effectively getting sold out there, or what are you thinking on future capacity?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

We're focused on launching the four that we talked about at the end of last year that we won. We got three more of those still to launch here over the next 90-120 days. That's really the team's focus. We continue to find new customers for SMC compound. Not sold out yet, but, you know, continue to be very bullish in terms of our SMC compound offering.

[Chip Moore, Analyst at Roth Capital Partners]

Excellent. Okay. Mexico sounds like you're running ahead of schedule. Anything to call out there to pay attention to or, you know, all systems go, it sounds like, for completing the year in the near term?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yeah, all systems go. Our whole executive team and myself spent the week down there two weeks ago, and just super proud of our team and the work that they have done. It's pretty awesome to stand up a building, you know, fill it full of equipment in a just a few short months. They're on schedule and we should have the Monterrey facility basically all moved and consolidated under one roof by the end of the second quarter. We'll start to, you know, get everything consolidated in the third quarter and see those the benefits associated with all of that move in the fourth quarter.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

And the Matamoros team has cleared out the space for the Volvo launch that happens in 2027, and all that equipment is being built and will be installed during the third and fourth quarter. Still a lot of work to do there in our Matamoros facility with a lot of that capital investment, and that we'll start to see the returns from that in the second half of 2027 or the first half of 2027 as it launches.

[Chip Moore, Analyst at Roth Capital Partners]

Yeah. Yeah. Okay, great. We'll look forward to late September.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yeah

[Chip Moore, Analyst at Roth Capital Partners]

Say thanks again to Dave. Dave, if he's out there, thanks very much.

[Dave Duvall, President and CEO at Core Molding Technologies]

Thanks, Chip. No, I'm here.

[Chip Moore, Analyst at Roth Capital Partners]

Hey, Dave. Yeah. Congrats.

[Dave Duvall, President and CEO at Core Molding Technologies]

Appreciate it.

[Dave Duvall, President and CEO at Core Molding Technologies]

look forward to

[Dave Duvall, President and CEO at Core Molding Technologies]

I think we're in a great place.

[Chip Moore, Analyst at Roth Capital Partners]

Yeah, agreed. You've done a good job, look forward to catching up down the road.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

All right. Absolutely.

[Operator]

Thank you. The next question comes from Bill Dezellem with Tieton Capital.

[Bill Dezellem, Analyst at Tieton Capital]

Thank you. A couple of questions. First of all, relative to the powersport strength, is that tied primarily to the new program wins, or is it primarily a rebound in purchasing because inventories are now at a more reasonable level?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

It's both, Bill, and I'll make sure I add color to that. There's definitely a push for watercraft on an annual cycle, so they wanna get those units out there to dealers in the spring 'cause most of North America has sort of a summer boating season. We got a pretty good push there on the watercraft side. Also, the overall recovery of powersports has underlined that we see it in all the mix. It doesn't matter whether it's a off-road vehicle or a watercraft, we see that base increase. I would add one to you as a third portion, a third leg of it. You'll remember the launch of the skid plate technology in Q3 of 2025.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

We still are on a year-over-year, so until we get to Q3, year-over-year, we'll be incrementally adding that skid plate technology and now having won another one with another OEM that's gonna use that same technology on another side-by-side that we'll launch in 2027. Very excited to continue to use that, our ability to make that large and ultra large part in a single shot.

[Bill Dezellem, Analyst at Tieton Capital]

If we're hearing you correctly, the powersports market is feeling like it is back to normal after the boom bust COVID, post-COVID. Now we're into what we just call normal cycle tied to powersports. Is that a fair interpolation of your comments?

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yes. That's for Core's version of powersports. Being a consumer myself, I can tell you there are some parts of powersports that probably are still weak. But the fact that our off-road segment is very much on the utility vehicle side. Utility vehicles are still selling very well. The stuff that contractors are using, municipalities, school districts, the people are doing work with them, versus a pure recreation product. Those continue to be very good sellers, and we have a lot of content on those products. We have a good mix in the powersports world.

[Bill Dezellem, Analyst at Tieton Capital]

Great. Thank you. Then I don't want Alex to feel left out here, so I'm going to ask a couple of balance sheet questions, please. Accounts receivable were up significantly from the fourth quarter, then interestingly, the contract liabilities were up a lot also. Wondering if there's some sort of a deferred revenue phenomenon taking place. Alex, would you help us out with those two items, please?

[Alex Panda, CFO at Core Molding Technologies]

Yes. Good question. That's a direct relation to our billing of a progress payment to Volvo. The large tooling job that will close in Q4 of 2026, we had a progress billing that went out at the very end of Q1, will be paid in Q2, ideally, that offset is down in contract liabilities.

[Bill Dezellem, Analyst at Tieton Capital]

Okay. They're one and the same, essentially.

[Alex Panda, CFO at Core Molding Technologies]

Correct. Correct.

[Bill Dezellem, Analyst at Tieton Capital]

Great. Thank you both.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thank you.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thanks, Bill.

[Operator]

Thank you. Once again, please press star then 1 if you would like to ask a question. The next question comes from [Lawrence Baumgartner], a private investor.

[Lawrence Baumgartner, Shareholder at Private Investor]

Hey, guys. First of all, I gotta say congratulations to David. If you've been around this stock a long time, the last two truck cycles, the stock went down to low single digits, and we seem to have maneuvered through this one pretty successfully through your watch. Congratulations on that.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thank you, Lawrence. We have a good team.

[Lawrence Baumgartner, Shareholder at Private Investor]

Yeah, you've really done a great job through this part of the cycle. Question on the Mexico expansion. I just noticed in the financials you threw in, as an addition to the financial statement that Looks like you expensed the expansion down there for, I don't know, $3 million. Would that normally be capitalized? Why would that be an adjustment to earnings?

[Alex Panda, CFO at Core Molding Technologies]

Yeah. There's a As part of the expansion, we are moving our presses in two locations. In our current Monterrey facility, we are moving six structural foam machines to the new facility in Monterrey, and then our DCPD business that's in Matamoros, that is also moving to the new Monterrey facility. As part of just accounting rules, we have to expense those expenses, mainly because it doesn't add any new value to the piece of equipment. We do review all of those expenses, and if we are doing improvements or upgrades to those machines as part of the move, we will capitalize those. The straight rigging costs on installation and reinstallation, because there's no true value add there, we cannot capitalize those expenses.

[Alex Panda, CFO at Core Molding Technologies]

They're one-time expenses that we add back for that won't be reoccurring.

[Lawrence Baumgartner, Shareholder at Private Investor]

Okay. Okay. I guess my second question or last question will be for Eric. You know, when sometimes when you get a new CEO in a company who wants to make a big splash and go out and make a big silly acquisition or often don't turn out to be very successful. I guess I'd like to know what your thoughts are and strategy is. I know we've talked about acquisitions with David in the past, and he's really kept stayed out of that game. I guess I'd like to know what Eric's thoughts are on that going forward.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Sure, Lawrence. Thanks for the question. I think an interesting part to make sure you're aware of is that Dave and I started roughly the same time, 7.5 years ago. Of course, been around the business for all of that time, been part of the executive team on Dave's team, and been part of building the strategy. I don't come in as an outsider, as the new CEO, as you know, you certainly have seen happen in plenty of Fortune 500s right now recently. No big splash, no major change as far as the strategy, as far as our execution engine. Really as far as our customers and our team is concerned.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

I am, I'm quite proud of our team as well as the board, as well as David L. Duvall and the succession work that we've done. We haven't surprised anybody, whether it's internal stakeholders, external stakeholders or our customers. We've done a pretty good job staying consistent. I would leave you with no major changes, just a shift and a continuation of the strategy and continue to grow the business and leverage the execution engine that we've worked so hard to protect. Being able to go through a truck cycle the way we have, as you suggested, is a huge, you know, change to the business over the years, and it's putting us in a spot where we can make different decisions and different investments, so.

[Lawrence Baumgartner, Shareholder at Private Investor]

Okay, good. Good. Thank you very much.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

I think you may know this. I think you may know this, Lawrence, but Dave's an advisor for the next 18 months for us as well. He'll continue to be around to be able to advise me, answer questions, support us, in an advisory role through all of 2027.

[Lawrence Baumgartner, Shareholder at Private Investor]

Yeah. You know, I think one as we've talked about in the past, sometimes just buying back your stocks when it's trading at a really inexpensive valuation is the best thing to do with your, with your really nice balance sheet that you've, that you've accumulated.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yeah.

[Lawrence Baumgartner, Shareholder at Private Investor]

Thank you.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

We've learned our lesson from not having a strong balance sheet from the beginning.

[Lawrence Baumgartner, Shareholder at Private Investor]

Yeah. If you remember the last cycle, I hope so.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Yeah. That changes your decision process.

[Lawrence Baumgartner, Shareholder at Private Investor]

Yeah. Great. Thanks, guys.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thank you.

[Operator]

Thank you. This concludes the question and answer session. I now would like to turn the conference over to Eric Palomaki for any closing comments.

[Eric Palomaki, COO and Incoming President and CEO at Core Molding Technologies]

Thank you for your interest in our company. We look forward to providing an update on our progress when we report our second quarter results in a few months. Have a great day.

[Operator]

Thank you. This concludes today's call conference. Thank you for attending today's presentation. You may now disconnect your lines.

Participants

Executives

• Alex Panda, CFO
• Dave Duvall, President and CEO
• Eric Palomaki, COO and Incoming President and CEO

Analysts

• Bill Dezellem, Analyst at Tieton Capital
• Chip Moore, Analyst at Roth Capital Partners
• Lawrence Baumgartner, Shareholder at Private Investor
• Sandy Martin, Managing Director at Three Part Advisors