Neo Performance Materials Q3 2026 Earnings Results & Report

Neo Performance Materials EPS Results

• Actual EPS: C$0.54
• Consensus EPS: N/A
• Beat/Miss: N/A
• One Year Ago EPS: N/A
• EPS Beat Rate: 1 of last 7 quarters

Neo Performance Materials Revenue Results

• Actual Revenue: C$275.57 million
• Expected Revenue: N/A
• Beat/Miss: N/A
• YoY Revenue Growth: N/A

Neo manufactures the building blocks of many modern technologies that enhance efficiency and sustainability. Neo's advanced industrial materials - magnetic powders, rare earth magnets, magnetic assemblies, specialty chemicals, metals, and alloys - are critical to the performance of many everyday products and emerging technologies. Neo's products fast-forward technologies for the net-zero transition. The business of Neo is organized along three segments: Magnequench, Chemicals & Oxides and Rare Metals. Neo is headquartered in Toronto, Ontario, Canada; with corporate offices in Greenwood Village, Colorado, United States; Singapore; and Beijing, China. Neo has a global platform that includes manufacturing facilities located in China, Germany, Canada, Estonia, Thailand and the United Kingdom, as well as a dedicated research and development center in Singapore.

Neo Performance Materials Q3 2026 Earnings Call Transcript

Key Takeaways

• Positive Sentiment: Neo raised 2026 adjusted EBITDA guidance to $180 million–$185 million from $140 million–$150 million, following third-quarter adjusted EBITDA of $47 million, up nearly 150% year over year. Management cited strong demand, firm pricing, and operating efficiencies.
• Positive Sentiment: Growth extended across all three business units. Rare Metals posted $35 million in adjusted EBITDA, up more than 200%, while Magnequench and Chemicals & Oxides rose about 25% and 70%, respectively; results benefited from volume growth and favorable pricing.
• Positive Sentiment: Neo began commercial shipments from its European magnet facility to a tier-one automotive customer in September and remains on track to launch two to three customer programs by year-end. The company said it is also seeing interest from industrial, robotics, wind, data center, and clean-energy customers.
• Neutral Sentiment: The EU selected Neo’s integrated magnet project for a grant of up to €126 million, supporting separation, metallization, and magnet capacity expansion. The overall project is expected to cost about $450 million and take roughly three years; financing, feedstock availability, and project phasing remain important execution considerations.
• Negative Sentiment: Ramp-up and transition costs are expected to increase before easing. Management said European magnet start-up costs may be higher in Q4 and into 2027, inventory could rise further in Q4, and parts of Silmet will be temporarily idled during feedstock-related reconfiguration.

Presentation

[Operator]

Good morning and welcome to the Neo Performance Materials third quarter 2026 earnings conference call. For opening remarks and introductions, let me turn the call over to Jim Fitzpatrick, Senior Vice President, Investor Relations and Communications for Neo. Jim, please proceed.

[Jim Fitzpatrick, SVP of Investor Relations and Communications at Neo Performance Materials]

Thank you, operator, and good day, everyone. Today's call is being recorded. A replay will be available starting tomorrow in the Investor Center on our website at neomaterials.com. Our call will be accompanied by a live webcast presentation. If you're joining us online, the slides will advance automatically as we progress through the discussion. You can also download a copy of the presentation from our website to follow along or reference afterward. On today's call are Rahim Suleman, Neo's President and Chief Executive Officer, and Jonathan Baksh, Neo's Executive Vice President and Chief Financial Officer. Before we begin, I want to remind listeners that some of the information discussed today will include forward-looking statements within the meaning of applicable securities laws. These statements reflect current expectations, but involve risks and uncertainties that may cause actual results to differ materially.

[Jim Fitzpatrick, SVP of Investor Relations and Communications at Neo Performance Materials]

We refer you to our filings on SEDAR and the Investors section of our website for a discussion of these risks. Financial figures are presented in USD unless otherwise stated, and we'll reference certain non-IFRS financial measures. Reconciliations are available in our financial statements and MD&A. I'll now turn the call over to Rahim Suleman, President and CEO of Neo.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Good morning, everyone, and thank you for joining us today. The third quarter was another excellent one for Neo, and it caps an exceptional first nine months of 2026. There were several significant milestones across three areas: financial and operational outcomes, short-term tactical execution, and mid-term strategic objectives. Seldom does one see such positive momentum across all three dimensions simultaneously. Let me start with the financial and operational updates. Adjusted EBITDA in the quarter was $47 million, up nearly 150% from $19 million in the third quarter of last year. Year-to-date, adjusted EBITDA is $140 million, up 150% from $55 million in the first nine months of 2025. Demand remains robust across our portfolio, reflecting the durable long-term trends shaping the market for rare earth magnetics and critical materials.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Jonathan will cover each of the business units in more detail, so I'll just comment that a lot of attention has been focused on the robust earnings of our Rare Metals business unit, but all three business units are delivering growth, operational improvements, and new business opportunities. From an adjusted EBITDA perspective, Magnequench is also up 25%, and Chemicals & Oxides up close to 70% from prior year. Today, we're again raising our guidance, as we now expect full-year 2026 adjusted EBITDA of $180 million-$185 million, up from our prior range of $140 million-$150 million, and up from our 2025 full-year actual adjusted EBITDA result of $76 million. This increase reflects our strong operating performance through the first nine months of the year, a healthy demand outlook, sustained pricing, and continued operating efficiencies through the business. Moving to slide four.

[Rahim Suleman, President and CEO at Neo Performance Materials]

On the short-term tactical execution side, in September, we achieved the milestone that the industry has been watching for, commercial production at our European magnet facility. We are now shipping volumes of rare earth sintered magnets to a European tier one traction motor customer going into the electric vehicle market in Europe. Reaching this commercial production milestone was another example of our ability to consistently deliver on our commitments to our customers and to the market. We built one of the most capital-efficient and cost-effective rare earth magnetic facilities outside of China, and in one of the shortest time frames. We delivered sintered magnets just three years after initially breaking ground. And this is a large volume, multi-year traction motor program going into one of the largest and fastest growing end markets for rare earth magnetics.

[Rahim Suleman, President and CEO at Neo Performance Materials]

This is the type of foundation that great magnet factories need to be built on. This is a testament to Neo's 30 years of experience in rare earth magnetics, our established operating experience as an industrial supplier, and the capabilities of our dedicated team. I'm proud to be part of such a talented team and grateful to our longstanding customers for their continued support and business. Every automotive magnet program moves through three stages: development and sampling, full automotive qualification, and then commercial production. We remain on track to launch two to three customer programs into commercial production by the end of this year. The first of those is now in production. Customer demand is also broadening well beyond automotive.

[Rahim Suleman, President and CEO at Neo Performance Materials]

We're in active discussions with customers across industrial, robotics, wind, data centers, and clean energy applications, reflecting growing demand for qualified magnet supply in Europe and in Looking further ahead, our long-term roadmap continues to target 20,000 tons of annual production, which brings us to the next set of key achievements in the quarter, strategic accomplishments. Moving to slide five. Commercial production at our European magnet facility is not only a critical milestone, but it is also a foundation. It demonstrates that we can make automotive-qualified magnets in Europe for the most demanding customers, and it dovetails directly into our strategy, building the most vertically integrated magnetics value chain in Europe. During the quarter, Neo's European Integrated Magnet Project was selected under the European Union's Innovation Fund for a grant of up to EUR 126 million, or approximately $140 million. This is a non-repayable, non-dilutive government grant.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Following our successful application, which was selected from hundreds of clean technology projects submitted to the Innovation Fund. Projects are assessed by independent experts on their degree of innovation, emissions reduction potential, maturity, scalability, and cost efficiency. Our project has four key elements. First, separation. Silmet 2.0 is expected to triple the total light and heavy rare earth separation capacity of our existing separation facility in Estonia. We will be able to process new and higher value feedstock from multiple sources. We expect Silmet 2.0 to be more efficient with new process technologies and chemistries designed to reduce energy and steam consumption by up to 30% compared with an equivalently sized existing facility, lowering both operating costs and CO2 emissions.

[Rahim Suleman, President and CEO at Neo Performance Materials]

By processing different feedstocks, Silmet 2.0 is expected to produce a broader range of higher value products, including the heavy rare earths dysprosium and terbium, as well as samarium, yttrium, and gadolinium at magnetic, medical, and electronic grade purity levels. These are products, technologies, and customers that we have already developed. Second is metallization. This involves converting light and heavy rare earth oxides into metals. This is the step that connects our separation business to our magnet business. This addition will be built on our knowledge of rare earth magnetic materials, making metals in our Rare Metals segment, as well as our existing light rare earth metallization capabilities. This process will allow Neo to capture cost efficiencies from co-location within our European separation and permanent magnet facilities.

[Rahim Suleman, President and CEO at Neo Performance Materials]

The third element of the European Integrated Magnet Project is the expansion of our European magnet facility, which we have been referring to as phase I-B. This would take the facility from approximately 2,000 tons today to approximately 5,000 tons of NdFeB block capacity per year. As part of the grant criteria, at least one-third of the 3,000 tons of additional capacity would be allocated to offshore wind farms in the EU. As we have discussed before, we designed our European magnet facility from the outset as a 5,000-ton operation. Phase I-A built the foundation, and phase I-B completes it. Underpinning the separation, metallization, and phase I-B magnets is new digital infrastructure. Digital twins and artificial intelligence would run across separation, metallization, and magnet manufacturing, learning from our existing plant data and our operators' expertise to predict quality, optimize resource use, translate validated insights into process controls.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Overall, this project reinforces Neo's leadership role as one of the few companies with integrated capabilities across separation, metals, and magnets. Commercial production in September proved our magnet capability in Europe. Decades of experience prove our separation knowledge. Existing infrastructure supports metallization, and actual operating experience with years of data collection capabilities will prove our digital transformation. Taken together, these are the core advantages and unique capabilities of Neo as an established and experienced operator in the rare earth magnetic supply chain. Neo expects the total CapEx of this project to be approximately $450 million. We will update our capital cost estimates as planning and engineering progress, and we expect the project to take about three years to complete, in line with both the volume growth from phase I-A and the availability of additional feedstock. Moving to slide six.

[Rahim Suleman, President and CEO at Neo Performance Materials]

With several growth opportunities ahead of us, including phase I-B, it is worth addressing how we plan to finance them. Neo is a profitable, established business today, and our future capital needs are tied to growth, largely in areas where we already operate successfully. In other words, this is capital to grow, not capital to survive. This speaks to the relevance of the $140 million grant from the Innovation Fund, and also to the designation of Silmet 2.0 as a Strategic Project by the European Commission. The designation of Silmet 2.0 as a Strategic Project in the EU is important because it brings priority administrative treatment, accelerated permitting, and access to current and future EU funding and debt finance. We announced grant funding from the Innovation Fund.

[Rahim Suleman, President and CEO at Neo Performance Materials]

There are also in place and in development a variety of additional EU debt financing and funding opportunities for critical materials projects, and of particular importance, for projects designated as strategic. Under its RESourceEU plan, the European Commission has set aside up to EUR 3 billion, or roughly $3.5 billion, to accelerate critical raw material projects, including through the European Investment Bank lending. Looking further ahead, the European Parliament has also backed an additional EUR 2 billion for critical material projects fund under the EU's 2028 to 2034 budget, which is currently being negotiated. We will provide updates in the future regarding the combination of grant, debt, and equity strategies to fund our future growth. Moving to slide seven. For Silmet 2.0 and our European magnet business, we need new diversified and higher value sources of rare earths, particularly heavy rares.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Two partnerships we announced during the quarter are important steps towards securing that supply. First, in August, we signed a binding term sheet with Carester, a French rare earth technology company building a recycling and heavy rare separation facility in France. The collaboration works in three ways. Carester will supply separated dysprosium and terbium oxides for our European magnet facility. We will send our magnetic swarf scrap to Carester for recycling and receive the recovered NdPr dysprosium and terbium oxide back, closing the loop and keeping those valuable rares in our supply chain. We may toll process any source of Carester's mixed rares carbonate at Silmet. Second, in September, we signed an MOU with Rainbow Rare Earths for its project in South Africa. This project is designed to recover rare earths from stockpiled phosphogypsum, a byproduct of previous mine production.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Because this byproduct material is already at the surface, the project requires no new mining and has the potential to reach the market quickly and competitively. Under the MOU, Neo would receive offtake rights to 40% of the project's annual NdPr oxide production and 65% of its mixed heavy rare earth carbonate, which contains dysprosium and terbium. In return, we would provide design input and technical support for the project's solvent extraction circuit to help it achieve its targeted product mix and purity. Both of these agreements are examples of industry participants working together to create a more solid and sound infrastructure for the whole industry to grow upon. Demand for rare earth magnets from secure, diversified sources is large and growing rapidly. We are proud to be working alongside industry participants to build supply chains that can keep pace with this demand.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Carester and Rainbow are just two of the agreements we have across the broader feedstock landscape. As an established separator, Neo is well-positioned to work with many of the new producers now developing mines and processing operations. We have signed several other MOUs with feedstock suppliers and are in active discussions with many more, offering our technical expertise and a reliable customer for their mixed rare earth carbonates, oxides, or metals. That gives us both integration and flexibility. Moving to slide eight. Stepping back from the quarter, I would like to spend a few minutes on the fundamentals of our business and why we remain confident in the long-term demand for the materials we make. The structural drivers of demand for rare earth magnets and critical materials are not changing.

[Rahim Suleman, President and CEO at Neo Performance Materials]

The electrification of transportation, the automation of industry, the build-out of AI data centers, the rise of robotics and drones, and the continued expansion of clean energy. Each of these trends requires more rare earth magnets and more specialty materials, and increasingly, customers need them to come from secure, diversified, and localized supply chains. That combination of growing demand and the need for diversified global supply is exactly where Neo is positioned across separation, metals, bonded and sintered magnets, and rare metals. When we think about growth in our end markets, we look at it across two dimensions. First, the growth of the market themselves. As I mentioned, these markets are tied to future-facing energy-saving technologies. The long-term direction is clear, even if we hear about individual markets growing faster or slower than expected in any given year.

[Rahim Suleman, President and CEO at Neo Performance Materials]

In Europe, demand is being driven by vehicle electrification, wind farms, and robotics. In North America, data centers, drones, and other advanced technologies are leading the way. That growth is spread across multiple markets, applications, and customers. Just as we talk about the importance of diversified supply, our end markets are diversified too, so they are not dependent on any single macro trend, any single end market, or any single customer. Second, we think about the market in terms of the concepts around diversity and security of supply. Take the European market for permanent magnets as an example. Today, Europe imports about 25,000 tons of permanent magnets a year, and this continues to grow each year. In other words, this is not a market that we are waiting to develop. The demand already exists, and customers need secure, diversified sources of supply.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Europe imports more than 90% of those 25,000 tons from a single jurisdiction outside of Europe. Customers and end markets all recognize the need for supply chain resilience and security. Neo has just started the production of the largest permanent magnet facility in Europe with 2,000 tons of capacity and plans to expand to 5,000 tons. That is still only a fraction of what is needed to build diversified and secured supply chains, especially as that 25,000 tons continues to grow rapidly. In our Rare Metals business, demand is being driven by aerospace, power generation, data centers, magnets, and semiconductors. Gas turbine orders have more than doubled over the past year, supported in part by data center power demand, and jet engines deliveries rose close to 20% in the last 12 months.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Hafnium, tantalum, and rhenium are critical to the superalloys used in jet engines and gas turbines, and gallium is essential to the semiconductors behind AI, telecommunications, power electronics, and gallium is used in rare earth magnets. At the same time, supply remains tight and concentrated. Again, there is existing and growing demand in an area requiring specialized technical expertise in a constrained supply environment. That drives higher demand and higher pricing. This is ultimately Neo's investment thesis, an established, profitable business with customers, technology, and supply chain integration in one of the fastest-growing and most strategic segments of the critical materials market. With that, I'll turn the call over to Jonathan to walk through the financial results in more detail.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Thank you, and good morning, everyone. Moving to slide nine. As Rahim highlighted, Neo delivered an excellent third quarter. Revenue for the quarter was $194 million, a nearly 60% increase from the third quarter of last year. Adjusted EBITDA was $47 million, up almost 150% year-over-year. Adjusted earnings per share was $0.40 compared to $0.14 per share in the same quarter last year. This performance reflects healthy demand, favorable pricing, and operating discipline across the portfolio. Moving to slide 10 and taking a closer look at our segments. Magnequench delivered another strong quarter, led by record bonded magnet volumes and record powder volumes for traction motor applications. Revenue increased 42% year-over-year to $79 million. Demand remained healthy across a number of applications, particularly in the industrial and automotive applications, as well as advanced computing infrastructure.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Bonded magnet volumes rose 17% year-over-year, led by server cooling fan applications in AI data centers. Bonded powder volumes for traction motors reached a quarterly record as a new vehicle model year ramped up. Magnequench's adjusted EBITDA for the quarter was $10.1 million, a nearly 25% improvement year-over-year. These results reflect a combination of strong volumes, disciplined cost management, and sustained strength in rare earth prices. Moving to slide 11. Chemicals & Oxides also delivered a solid quarter. Adjusted EBITDA was $6.8 million, up almost 70% from the third quarter of last year. These results reflect solid performance in emission catalysts as well as favorable rare earth pricing. Our water treatment business continues to advance its new process enhancement technology that we shared last quarter as it builds towards broader commercial adoption.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

As part of our European Integrated Magnet Project, Silmet is starting a planned transition away from its legacy feed sources towards new and higher value feedstock from multiple sources. As part of this transition, certain portions of the facility will be temporarily idled while existing lines are reconfigured and prepared for new feed sources. These new higher value feedstocks are expected to fundamentally improve the economics of Silmet based on higher utilization, a stronger product mix, and greater stability of supply for customers. Moving to slide 12. Our Rare Metals segment had another outstanding quarter with revenue of $88 million, up almost 125%, and adjusted EBITDA of $35 million, up over 200% year-over-year. These results were driven by robust volumes amid tight global supply, as well as sustained elevated pricing.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

These market conditions reflect ongoing geopolitical risk and increased prioritization of secure access to critical materials across end markets, including aerospace, industrial gas turbines, and semiconductors. Our hafnium business continued to benefit from favorable pricing, with spot volumes holding steady. Gallium had its best quarter ever, delivering record gross profit as prices continued to climb on export restrictions and tightening global supply. Rhenium also posted record quarterly results driven by favorable pricing and solid demand from superalloy applications. Moving to slide 13. On the balance sheet, we ended the quarter with $78 million in cash and $143 million in total debt, and we remain in a healthy financial position. As we saw last quarter, inventory levels increased primarily due to low-cost hafnium scrap materials purchased, strategic inventory for our Magnequench business, as well as ramp-up of our European sintered magnet business, which is now in commercial production.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

As Rahim mentioned, we're raising our 2026 adjusted EBITDA guidance to $180 million-$185 million, up from our prior range of $140 million-$150 million. At the midpoint, that's 26% above our prior guidance and roughly 2.4x our full-year 2025 adjusted EBITDA of $76 million. This increase reflects our year-to-date results, healthy demand across the business, firm pricing, as well as higher contracted hafnium volumes for the fourth quarter. With that, I'll turn the call back to Rahim for closing remarks.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Thank you, Jonathan. To summarize, this was an outstanding quarter for Neo, building on the momentum we established in the first half of the year. As you heard today, our results reflect healthy demand across all three segments, disciplined execution, and a favorable pricing environment. Looking ahead, we see significant opportunities for future growth. That's why we're investing in the capacity and capabilities that Neo needs to meet accelerating demand for permanent magnets and critical materials. Three long-term pillars continue to support our growth.

[Rahim Suleman, President and CEO at Neo Performance Materials]

First, the sustained demand from a number of high-growth sectors. Second, a global push to diversify critical material supply chains and reduce reliance on concentrated sources. And third, Neo's competitive advantage, built on 30 years of operating experience, a technical depth in rare earth magnetics and specialty materials, a combination that is difficult to replicate. Thank you all for joining us this morning. I will now turn the call back to the operator for questions.

[Operator]

Thank you, Mr. Suleman. Ladies and gentlemen, we now begin the question-and-answer session. If you'd like to ask a question, please press star, followed by number one on your telephone keypad. If your question has been answered and you would like to withdraw from the queue, please press star, followed by number two. If you're using a speakerphone, please lift your handset before pressing any keys. One moment, please, while we compile the roster. Your first question comes from Nick Giles with B. Riley. Please go ahead.

[Nick Giles, Analyst at B. Riley]

Yeah. Thank you, operator. Good morning, everyone. Rahim and Jonathan, I want to congratulate you on yet another record quarter across multiple fronts here. It's good to see the selection for the E.U. Innovation Fund, and my question was ultimately, how should we think about the potential earnings uplift that you could unlock from the separation, expansion, and metallization as well, kind of separating it from phase I-B at Narva? Thank you.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Yeah. Thanks, Nick. Great question. I think that in time, we'll give more guidance and more information on the specifics of the earnings opportunities. But what I would say is this today. We've given general ranges on where we thought phase I-A would land in terms of when it's filled, the $15 million-$20 million of EBITDA. We've talked about phase I-B will be a factor much greater than that, given that you're dealing with operating leverage, you're dealing with newer customer contracts, you're dealing with more experience and execution. So, our views on the phase I-B outlook remain exactly consistent with the things that we've talked about already. Then you add to that the separation capability, and there's a couple of dynamics in the separation capability that really matter.

[Rahim Suleman, President and CEO at Neo Performance Materials]

One is today, we're running substantially a light rare separation facility, and we're running it at about 50% capacity, and we're running it with a feedstock whose basket value, whose underlying composition is not, let's say, market-leading in that environment. As we go forward, we see better compositions in feedstock, more volume composition in feedstock, not only to our existing capacity, but to our expanded capacity, and then adding heavy rare separation on top of that. It is an order of magnitude greater than what Silmet 1.0 can do today. We'll give specific kind of information on how we see that guidance unfolding over time, but I think it's a significant and material change to the existing earnings profile of the company.

[Nick Giles, Analyst at B. Riley]

No, that's great to hear, and look forward to those future updates. My second question was just around the Rare Metals segment. Earnings continue to be very robust there, and just was looking for updated color around opportunities to expand either hafnium or gallium production, what the capital intensity might be, the sources of feedstock, and if you could be recipient of any government support on that front. Thank you.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Thanks. You're right. It's incredibly robust. It continues to be robust. On expansion of those facilities, I think that both of those facilities have opportunities to, A, run more volume in their existing footprint and with existing capacity in place. But I think in particular, especially for something like hafnium, the step for us would be to increase the scope of the scrap and the material that we can receive. Separating the two between kind of the production volumes and the facilities, I think there's plenty of opportunity to grow. There's no CapEx really needed for continued growth in that area. There's obviously plenty of customer demand, the dynamic is accessing more scrap sources, and we are making investments primarily in technology, less so in actual CapEx.

[Rahim Suleman, President and CEO at Neo Performance Materials]

These are not big CapEx numbers for us, but it is adding to our technology to be able to separate more sources of scrap. We're continuing to have dialogue with more sources of scrap around the world, and then opening our window of what type of material we can receive and process, and I think both of those are moving along extremely well. I think you'll see outcomes from that process probably later in 2027 and then into 2028.

[Nick Giles, Analyst at B. Riley]

Okay. Fantastic. Well, congrats again, guys, and thanks for taking my questions.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Thanks very much.

[Operator]

Thank you. Your next question comes from Nik Boychuk with ATB Cormark. Please go ahead.

[Nik Boychuk, Analyst at ATB Cormark]

Thanks. Morning, guys. I want to stick on the vertical integration and this EU Innovation Fund grant. The incremental capital spend of EUR 400 million is obviously a quantum shift from what we were expecting for phase I-B, and I appreciate, Rahim, your comments that the better mix volumes, et cetera, are going to be a magnitude of revenue. But I am curious the visibility specifically around either offtake agreements, partnerships, agreements that you are going to see that feedstock, or that it has to come through to you. I recognize that 3,000 of the metric tons from phase I-B, a third of that goes to offshore wind. Do you have a similar arrangement for these other things related to the metallization? I want that extra color, please.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Yeah. So, great question, and maybe I will start from the back and go forward. We absolutely have a ton of visibility in terms of end product for the permanent magnet facility, right? I mean, that is just continuing to grow into the customers and end markets that we have already talked about. As I talked about, the size of that market is enormous, and the existing size, right? We are not talking about let us count on a bunch of reshoring to happen, let us count on a bunch of motor manufacturers to start new production in the jurisdiction. The jurisdiction is already 25,000 tons, and it is the home of actuator development for robotics. It is the home of wind farm development. And it is going to continue to grow. So, from an end market perspective, we can never catch the demand.

[Rahim Suleman, President and CEO at Neo Performance Materials]

On the magnet side, we absolutely have no kind of concern about finding a home for the material that we will eventually turn into magnets. Stepping back one side, the metallization will be sized appropriately for a partial supply to the Magnequench business unit, which is to say that we fundamentally believe in diversified supply chains and optionality, and we will actually continue to operate that way. A portion of our incoming material will come from ourselves, but a portion of our incoming material will still come from third parties. That is what we fundamentally believe in terms of robustness of a supply chain. Then you step back one further to that into separation. There is obviously homes for all the separated material, because I mean, Magnequench alone could consume all the material, but we will also have internal and external customers. We already have external customers.

[Rahim Suleman, President and CEO at Neo Performance Materials]

I mean, we have been selling heavy rares. For decades, we have the largest kind of sales force and most experienced knowledge base of where the customers are for all the heavy rare earths. So we have, again, no concern on moving the material that we ultimate separate. The only open question, frankly, is feedstock, right? First of all, understanding that we need to break feedstock into two. It is not a limitation in any way to Magnequench because there is a whole bunch of other mines that will be developing separators, and there will be a bunch of oxides become available. So Magnequench can just continue to buy from those parties. The only open question is whether Silmet, the separation portion, can find feedstock.

[Rahim Suleman, President and CEO at Neo Performance Materials]

And obviously, there is a whole bunch of mines that are coming to market, and there are only four or five qualified separators in the world outside of China. Some of these mines will choose and want to separate themselves. Some of these mines will choose to have separation partners. We have just announced two MOUs just in this quarter. We have several from the past, and I assure you we are talking to several others in terms of that feedstock. So, I think it is going to work out perfectly great. And we have a balance. We hear what the various resource companies are talking about in terms of volumes and timing, and then we plan our business, and we are a little bit more conservative on timing to ensure that the timing would be suitable for our separation facility.

[Rahim Suleman, President and CEO at Neo Performance Materials]

We can build faster and execute faster, so we wait until we have a high level of confidence. And one of the things that we will be building in to the separation capability is the ability to process multiple feeds from multiple sources. So there is different processes that one puts in place, different ways that you balance the cascades later on in the manufacturing process. All of those things are envisioned and planned for the Silmet 2.0 build-out. In fact, even what we internally call the Silmet 1.5 build-out, which is an interim step to allow us to produce more and process more feedstocks.

[Rahim Suleman, President and CEO at Neo Performance Materials]

So, I do not think we are worried at all about customers and markets from any of the step of the process. The only thing that needs kind of more clarity, I think, is assurances around feedstocks. I think you've seen the progress we've made, and you can track the progress of the various mines around the world. They are beginning to make progress, and I think we will be a separator and a partner of choice for them.

[Nik Boychuk, Analyst at ATB Cormark]

Okay, thanks. We'll wait to get a little bit more of that color as it develops over time. I guess moving to the bonded business within Magnequench, given the magnitude of this investment here you're making in Europe, have your thoughts around expanding capacity for any of the bonded, either magnets or powders outside of China changed? If so, what is the outlook that you have for that business now that it's really started to grow again with some of these emerging needs?

[Rahim Suleman, President and CEO at Neo Performance Materials]

Yeah, you're absolutely right. The market is growing tremendously, and I appreciate talking about bonded. I actually enjoy talking about bonded because people forget about that as an industry. It faces a greater concentration risk, and that bonded is actually like 94% concentrated in a single jurisdiction and only 6% outside of that jurisdiction. So, it faces an equivalent concentration risk. It faces the equivalent in terms of end markets, data centers, robots, drones, automotive, all those types of things require bonded.

[Rahim Suleman, President and CEO at Neo Performance Materials]

It has a fundamental advantage in that it doesn't use the heavy rare earths, it doesn't use DyTb, so there's no constraint in terms of NdPr, and it doesn't face the constraint that people are worried about in terms of DyTb. We are continuing to grow that business, and we will be growing an outside, more geographic version of that footprint with more production outside of China, and I think you'll see announcements on both powders and magnets on that in due course.

[Nik Boychuk, Analyst at ATB Cormark]

Okay, thanks.

[Operator]

Thank you. Your next question comes from Max Yerrill with BMO Capital Markets. Please go ahead.

[Max Yerrill, Analyst at BMO Capital Markets]

Hey, guys. Thanks for taking my question. I just wanted to ask on the Rare Metals side now, with customers already booking into 2027, how much of your target volumes for next year are already contracted? Any commentary you can give on how these contracts pricing is playing out? How much is that spot versus maybe legacy pricing? Thanks.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Hey, Max. This is Jonathan here. Yeah, I think another great question. As we've talked about, we've been booking contracts into 2027 for several months now. I think if you look at our historical business, we would generally enter the new year with roughly 70% of our book of business for the following year contracted. We're basically on that pace, basically working towards what seems like will be a normal year for us, where we'll enter 2027 with roughly 70% of our book of business contracted for the coming year.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

When it comes to pricing, we still have a blended average price of historical and new contracts. Obviously, all the new contracts we're booking are at representative prices, at current market prices. But we still have a blended average of contracts that would have been booked, for example, in 2025 and earlier in 2026. What you are seeing in our ASPs are a blended average of those. But all of the business we are booking now are at what you would say is representative market prices today.

[Max Yerrill, Analyst at BMO Capital Markets]

That is helpful color. Thanks, Jonathan. On the magnet build-out then, when we look at the three projects from the separation, metallization, and magnets, is there the potential to separate these out and phase them in order to better use internally generated cash flows versus tapping the market? Or are they kind of required to happen in tandem as feedstock sources?

[Rahim Suleman, President and CEO at Neo Performance Materials]

Yes, absolutely, we would phase them. But I think that, you break the phasing into two, right? From a pragmatic perspective, one phases them because one drives them as individual projects with customers and dynamics outlines, right? Which, step back a few months and we talked about putting in the long lead item orders for some of the equipment necessary in phase I-B. Clearly, we have already started that journey, and that journey will be phased entirely to tie with the demand requirements and the growth of phase I-A. We will make those decisions independently according to where the business profile exists. But I think we see the business profile frankly existing for all elements of the project. We have the ability to phase them. Pragmatically, all three of them need to happen kind of sooner than later.

[Rahim Suleman, President and CEO at Neo Performance Materials]

From a customer market perspective, sooner than later. From our perspective, it is about a regimented process of when is the right time and when do you have the right information to build out the engineering to keep your budgets and your timelines as you have defined them. As you can see from our past, we are very particular on defining our timelines and defining our budgets for these major projects, and we have done every one of our projects on time and on budget. I think that that is about the discipline there. In terms of the capital requirement, if we could phase them in terms of all the additional requirements, again, I think this is going to be customer-driven, market-driven, and growth opportunity-oriented. We will phase the capital requirements according to when we actually need them.

[Rahim Suleman, President and CEO at Neo Performance Materials]

You've seen that we don't just take excess cash to sit on the balance sheet with excess cash. We don't think that's a good use of shareholders' money. We do think it's a good use of shareholders' money the moment that cash is being deployed in a project that's building. Every one of these have strong return on capital profiles, strong customer dynamics. They're in a technology that we're already comfortable with. So, we have a very good assessment of profitability and belief in the projects. I think it's more tied to us focusing on the right timelines to be working on the right things, and I think that the opportunities are immense. So whether we phase it out in terms of a capital requirement, I think that's secondary to phasing out in terms of a market requirement.

[Max Yerrill, Analyst at BMO Capital Markets]

Understood. Thanks, Rahim.

[Operator]

Thank you. Your next question comes from Ian Gillies with Stifel. Please go ahead.

[Ian Gillies, Analyst at Stifel]

Morning, everyone.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Morning, Ian.

[Ian Gillies, Analyst at Stifel]

As it pertains to the inventory build in the quarter, is that largely due to your confidence in and around the hafnium outlook for, I guess, 4Q and into next year, just given where contracting is and some of the prior comments you've made?

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Hey, Ian. The primary build has continued to be in hafnium, continuing to buy low-cost scrap, booking contracts into next year in anticipation of continued strong profitability. Short answer is that's part of it. The other part of it is obviously we're ramping the new sintered magnet facility, so we do have inventory build there as well. I do expect we'll have likely continued inventory build into 4Q, and then I expect some normalization after that.

[Ian Gillies, Analyst at Stifel]

Understood. On the startup and transition costs, they took a step change higher this quarter, and while fully acknowledging it doesn't impact adjusted EBITDA, are you able to provide any insight on where you think those costs may be in 4Q and even 2027, just because it does matter from a cash conversion perspective?

[Rahim Suleman, President and CEO at Neo Performance Materials]

Separating the two, I think you will see. Look, all the inventory that Jonathan talked about us building here over the last year, it is largely opportunistic. We are well positioned and well in the money on all of the inventory that we hold. There are really strong margins available to us in the inventory that we are holding. In terms of how that unwinds over time, I think it does unwind levels over time, and I think it then starts generating a lot of cash. To the other element of the startup costs to build the magnet facility in Europe, yeah, they are larger this quarter, obviously. Frankly, I think they will be larger in Q4 and into 2027. We are structurally building this facility and preparing this facility for 2,000 tons and 5,000 tons.

[Rahim Suleman, President and CEO at Neo Performance Materials]

We are hiring the engineering and the back office and all of those types of support, quality, and all of those things for the number of programs that we are launching. It is a bit of an odd dynamic where our cost structure is not actually reflective of the current operating dynamic of the business, but it speaks to our confidence level. Our ability, we can change it any time that we want, but our view right now is build more of the institutional capacity because more and more business is coming, more and more opportunities exist. While we are ramping production here for 2027, I think we will still have low volumes relative to the size of the infrastructure that we have put in place.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Maybe, Ian, just the one thing I would add is, I think everything line, the general trend is the ramp costs will increase before they decrease. I will say there were some one-time charges, some one-time ramp items that did exist in the quarter, so I think that will also normalize into 4Q. But generally, the trends Rahim outlined are absolutely spot on.

[Ian Gillies, Analyst at Stifel]

Okay. As we think about 2027, are you able to maybe help outline what sort of working capital you think you may have to consume or release? I know obviously part of that is dependent on revenue growth and the like, and perhaps where you think CapEx may shake out, just given the various opportunities heading into next year.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Yeah, so like I mentioned on inventory, I do think it is the case that it increases through Q4. I think we hold steady from there, but I do expect some amount of unwind. Obviously, this is dynamic, and I think every quarter we enter the year with some level of expectation, but given prices, given our contracting, things change. I would say generally it is a hold of inventory with some amount of unwind, right? When you look at CapEx, if you kind of just kind of work backwards, we generally talked about sustaining CapEx being in that $6 million-$10 million range, so that is kind of your base starting point.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Obviously, CapEx spend for phase I-A is behind us, and then when it comes to growth CapEx, it is basically going to be when do we initiate or when do we start providing clarity on timing of phase I-B. We have started expedited equipment purchases for phase I-B, so that is already starting to flow through our cash flow, so there will be some equipment purchases. But those are, we are talking about order of magnitude, tens of millions of dollars. The real trigger will be when do we start phase I-B, and I think that is something that we will add clarity on in the coming months.

[Ian Gillies, Analyst at Stifel]

That is it for me. I will leave it there. Thanks very much for the detail.

[Jonathan Baksh, EVP and CFO at Neo Performance Materials]

Thanks, Ian.

[Operator]

Thank you, Ian. Your follow-up question comes from Nick B. Riley. Please go ahead.

[Nick Giles, Analyst at B. Riley]

Yeah, thanks for taking my follow-up. I know it doesn't draw as much attention, but I did want to ask about the water treatment business. I saw that you expanded into new markets, and so I was hoping you could just remind us of kind of the overall TAM there as you see it today, and what kind of revenue growth in that business we should be penciling in as we look to 2027 and beyond. Thanks.

[Rahim Suleman, President and CEO at Neo Performance Materials]

Yeah, thanks for the question, Nick. I'm really impressed with the opportunity set that exists within the water treatment universe. It's really important kind of within the Neo portfolio to be able to move all different kinds of material that you get separated, right? Everybody generally in the market talks about the four magnetics, but of course, Neo talks about a whole series of other materials as well, both on the light side and on the heavy side. And water treatment, and there's a few other products that we have that are outlets for these types of products and programs. Our water treatment business continues to grow, although I would say it was a relatively small growth. It's still a relatively small business in the year 2026. We do expect kind of double-digit growth in that business as we continue to move forward.

[Rahim Suleman, President and CEO at Neo Performance Materials]

I would suggest it's probably still a smallish business in 2027, and then one of the elements will be, as we also separate more material, then that business will grow with that capabilities as well. I would say in the short term in 2026 and 2027, it is still a smallish business. It is more of an opportunistic business of we can move more material, and we have more outlets for material, and then it is what I'd say from an R&D and a product suite perspective, a very important concept of us being in the market and being able to move materials that are not the magnetic materials. But in the year 2026 and 2027, from an EBITDA contribution and even from a revenue contribution perspective, they're still small numbers.

[Nick Giles, Analyst at B. Riley]

Makes sense. Okay. Thanks again, guys.

[Operator]

Thank you, Nick, and everyone. That concludes the question and answer session. Ladies and gentlemen, this concludes your conference call for today. We thank you for participating and ask that you please disconnect your lines. Have a great day.

Participants

Executives

• Jim Fitzpatrick, SVP of Investor Relations and Communications
• Rahim Suleman, President and CEO
• Jonathan Baksh, EVP and CFO

Analysts

• Nick Giles, Analyst at B. Riley
• Nik Boychuk, Analyst at ATB Cormark
• Max Yerrill, Analyst at BMO Capital Markets
• Ian Gillies, Analyst at Stifel