Compare Stocks

Dana Incorporated, together with its subsidiaries, provides power-conveyance and energy-management solutions for vehicles and machinery in North America, Europe, South America, and the Asia Pacific. The company operates through four segments: Light Vehicle Drive Systems, Commercial Vehicle Drive and Motion Systems, Off-Highway Drive and Motion Systems, and Power Technologies. It offers drive systems, including axles, driveshafts, transmission, and wheel and track drives; motion systems, such as winches, slew drives, and hub drives; and electrodynamic technologies comprised of motors, inverters, software and control systems, battery-management systems, and fuel cell plates. The company also provides sealing solutions, such as gaskets, seals, cam covers, and oil pan modules; thermal-management technologies, including transmission and engine oil cooling, battery and electronics cooling, charge air cooling, and thermal-acoustical protective shielding; and digital solutions that include active and passive system controls, as well as descriptive and predictive analytics. It serves vehicle manufacturers in the global light vehicle, medium/heavy vehicle, and off-highway markets, as well as the stationary industrial market. The company was formerly known as Dana Holding Corporation and changed its name to Dana Incorporated in August 2016. Dana Incorporated was founded in 1904 and is headquartered in Maumee, Ohio.

Modine Manufacturing Company provides engineered heat transfer systems and heat transfer components for use in on- and off-highway original equipment manufacturer (OEM) vehicular applications. It operates through Climate Solutions and Performance Technologies segments. The company offers gas-fired, hydronic, electric, and oil-fired unit heaters; indoor and outdoor duct furnaces; infrared units; perimeter heating products, such as commercial fin-tube radiation, cabinet unit heaters, and convectors; roof-mounted direct- and indirect-fired makeup air units; unit ventilators; single packaged vertical units; precision air conditioning units for data center applications; air handler units; fan walls; chillers; ceiling cassettes; hybrid fan coils; and condensers and condensing units. It also provides heat recovery, round tube plate fin, and motor and generator cooling coils; evaporator unit, fluid, transformer oil, gas, and dry and brine coolers, as well as remote condensers; and coatings to protect against corrosion. In addition, the company offers powertrain cooling products, including engine cooling modules, radiators, charge air coolers, condensers, oil coolers, fan shrouds, and surge tanks; on-engine cooling products comprising exhaust gas recirculation, engine oil, fuel, and charge air coolers; liquid-cooled products, such as engine oil, EGR, liquid charge air, transmission and retarder oil, fuel coolers, and condensers; and complete battery thermal management systems and electronics cooling packages. It serves heating, ventilation, and cooling OEMs; construction architects and contractors; wholesalers of heating equipment; automobile, truck, bus, and specialty vehicle OEMs; agricultural, industrial, and construction equipment OEMs; and commercial and industrial equipment OEMs. The company has operations in North America, South America, Europe, and Asia. Modine Manufacturing Company was incorporated in 1916 and is headquartered in Racine, Wisconsin.

Tenneco Inc. designs, manufactures, and sells clean air, and powertrain products and systems for light vehicle, commercial truck, off-highway, industrial, motorsport, and aftermarket customers worldwide. It operates through four segments: Motorparts, Performance Solutions, Clean Air, and Powertrain. The Motorparts segment offers shock and strut, steering and suspension, braking, sealing, emissions control, engine, and maintenance products under the Monroe, Champion, Öhlins, MOOG, Walker, Fel-Pro, Wagner, Ferodo, Rancho, Thrush, National, Sealed Power, and other brands. The Performance Solutions segment designs, manufactures, markets, and distributes noise, vibration, and harshness performance materials; advanced suspension technologies; and ride control, braking, and systems protection products. The Clean Air segment offers catalytic converters and diesel oxidation catalysts; diesel particulate filters; burner systems; lean nitrogen oxide (NOx) traps; selective catalytic reduction (SCR) systems; hydrocarbon vaporizers and injectors; SCR-coated diesel particulate filters systems; urea dosing systems; four-way catalysts; alternative NOx reduction technologies; mufflers and resonators; fabricated exhaust manifolds; pipes; hydroformed assemblies; elastomeric hangers and isolators; and aftertreatment control units. The Powertrain segment provides pistons, piston rings, piston pins, cylinder liners, valvetrain products, valve seats and guides, ignition products, dynamic seals, bonded piston seals, combustion and exhaust gaskets, static gaskets and seals, engine bearings, industrial bearings, and bushings and washers. The company was formerly known as Tenneco Automotive Inc. and changed its name to Tenneco Inc. in 2005. Tenneco Inc. was incorporated in 1996 and is based in Southfield, Michigan.

Gentherm Incorporated designs, develops, manufactures, and sells thermal management and pneumatic comfort technologies in the United States and internationally. The company operates in two segments, Automotive and Medical. The Automotive segment offers climate comfort systems, which include seat heaters, blowers, and thermoelectric devices for variable temperature climate control seats and steering wheel heaters that are designed to provide thermal comfort to automobile passengers; integrated electronic components, such as electronic control units; and other climate comfort systems, including neck and shoulder conditioners and climate control system products for door panels, armrests, cupholders, and storage bins. It also provides battery performance solutions comprising cell connecting devices and battery cable technologies used for various types of automotive batteries; thermal management products for heating and cooling; and automotive electronic and software systems, including electronic control units for climate comfort systems, as well as for memory seat modules and other devices. In addition, it offers lumbar and massage comfort solutions, such as lumbar support, side bolster adjustment, multi-contour seats, and massage systems; automotive cable systems, including ready-made individual cables, and ready-to-install cable networks; and valve systems products consisting of applications that offer solutions in fuel management, and other valves for brake and engine systems. This segment serves light vehicle original equipment manufacturers and tier 1s, such as automotive seat manufacturers, and aftermarket seat distributors and installers. The Medical segment offers patient temperature management systems. The company was formerly known as Amerigon Incorporated and changed its name to Gentherm Incorporated in September 2012. Gentherm Incorporated was incorporated in 1991 and is headquartered in Northville, Michigan.